A landlock publication failed with `E409 Failed to save packument` on the
second of three packages. The registry answers a write it could not commit that
way, and publishing several packages back to back is what provokes it.
Neither publish path could recover. The native sequence published from a shell
loop of bare `npm publish` calls: no retry, and no way to resume, because the
registry rejects a repeat of an existing version permanently — so a failure
partway through left the release stuck. publish.ts skipped versions already
present, which made a re-run safe, but had no retry either.
Both paths now attempt a tarball up to four times, space writes at least two
seconds apart, and back off 2s/4s/8s between attempts. Every retry re-reads the
registry first, because a reported failure can answer a write that landed
anyway: a version that now exists with this tarball's integrity counts as
published rather than as one to place again. That same re-read is what turns a
mid-run `E403 cannot publish over the previously published versions` into a
skip when the bytes match, and leaves it a hard failure when they do not.
The native sequence gets the registry comparison publish.ts already had, through
its own script rather than shared code — the two sequences keep separate
publication paths. Its publish job now checks out the repository, which the
shell loop did not need.
Verified against a scripted registry: a clean publish, one E409 then success, an
E409 whose write landed anyway, E409 on every attempt (fails after four), and a
version already present with matching integrity (publishes nothing).
The three release sequences shipped with publishConfig.access: restricted, so
nothing in the @deepseek-ai scope was installable from outside the organization.
A restricted dependency is what actually blocks a public consumer: every harness
package declares the vendored framework as a peerDependency, and
dsh-sandbox-local declares the Landlock entry as a dependency. Those two
sequences therefore go public first — the nine vendor/* packages and the three
native/landlock-run packages — while the dsh family stays restricted until its
own sequence is opened deliberately. No public package requires a restricted one
in this arrangement.
Access is now per sequence, so no publish path can pass --access: one flag
cannot express two levels and would override the manifest that owns the fact.
publish.ts stops passing it, matching the native workflow, and
check-workspace-constraints holds each manifest to its own sequence's level,
which is what stops the scope from drifting one package at a time.
Harness consumers reference the Landlock entry as workspace:^ instead of
workspace:*, so a published harness package accepts the entry's patch and minor
releases. The entry keeps workspace:* for its platform packages, where the
binary must match the entry version exactly.
Two rationales that named a private registry no longer describe the vendored
sequence; they now state the durable reason, which is that the verification must
not depend on the registry already carrying matching versions.
release:vendor --prerelease rc.1 appends the identifier to the version each
package would take, so a first publication can be thrown away instead of holding
the stable dist-tag: publish already routes any version with a prerelease
segment to --tag next.
A prerelease does not consume its release numbers, so the stable release that
follows takes the same ones rather than skipping a patch. Deciding that needs
semver precedence, which git's version sort does not provide — it places
4.0.1-rc.1 above 4.0.1 — so the newest published version is chosen by comparing
versions here, numeric prerelease fields numerically.
dsh-sandbox-local declares @deepseek-ai/node-addon-landlock-run in
dependencies, not optionalDependencies, so omitting optional dependencies left
npm resolving it from a registry that does not carry it. The dsh pack job now
packs that entry for verification; its own platform packages stay out, being
optional and needing a musl toolchain per architecture.
The verification reads each directory by its contents rather than a pack order
file, because a directory packed only to satisfy a cross-sequence dependency has
no release order to describe.
The Landlock platform packages sit behind optionalDependencies, and npm fails
the install on their 404 rather than skipping them: they belong to the native
sequence, whose pack needs a musl toolchain and one build per architecture, so
this job cannot produce them and holds no credentials to fetch them. A consumer
that cannot install them must still start, which is what optional means here.
The release spec also gains block bodies where the lint rule rejects returning a
void expression from an arrow shorthand.
The root manifest carries the dsh family version. bump writes it with the
members, because the workspace constraint requires them to match, and that
constraint now accepts a prerelease segment: without both, release:dsh 0.0.2
left the root behind and 0.0.1-rc.1 could satisfy neither check.
The Landlock workflow no longer passes --access public, which overrode the
restricted publishConfig this repository just adopted for those packages.
Vendored change detection reads build inputs when a package publishes build
output, and vendor/cordis publishes the src its export map already pointed at:
its lib/ is untracked, so a real source edit read as 'nothing changed' and the
next publish would fail on a version whose bytes moved. The next version also
takes the last published version as its baseline, so a re-sync that restores a
lower upstream version cannot recompute a version already on the registry, and
bump confirms the registry carries what the newest tag names.
Tag prefixes are constructed rather than recovered from a full tag, which a
hyphenated version defeated. Pack runs group per ref so concurrent pull requests
stop displacing each other, the publish job carries the global group, and the
unused id-token permission is gone.
Every release script sits behind an entry guard, which is what lets the pure
judgements carry tests: tag naming, publish order and cycle reporting, version
arithmetic, payload policy, and the change judgement.
The Agent Note moves to implemented and states what shipped: one probe command,
the registry confirmation that now exists, and byte reproducibility recorded as
assumed rather than measured.
The harness packages declare the vendored framework as a peer, so installing
only the dsh tarballs left npm resolving @deepseek-ai/cordis from a private
registry the credential-free pack job cannot reach. The verification now takes
several pack directories and installs every tarball in them, and the dsh
workflow packs the vendored family for that purpose while still publishing only
its own set.
The verification also reads what each tarball declares instead of what the
checkout says, which is what let the process and tarball helpers become one
home each - the three copies of a spawn wrapper were a duplication finding.
release:dsh takes major, minor, patch, or an explicit version and writes one
version across the family; release:vendor takes none and increments each
package's own patch, but only for packages whose published payload changed since
their vendor-<package>-v* tag. That tag is the record of the commit a package
last published from, so the change judgement needs no state file, and the diff
is filtered through the manifest's files rules - editing a vendored comment does
not trigger a release.
Both refresh the lockfile, commit, and print the tag to create after the commit
merges. --dry-run reports the plan and writes nothing.
Incrementing the release numbers is also what drops an upstream prerelease
segment: cordis 4.0.0-rc.7 publishes as 4.0.1, because a prerelease version
would not satisfy a consumer's plain range.
A throwaway consumer outside the repository declares every member as a file:
dependency, installs, and runs the installed executable with plain Node,
asserting the version it reports. That is the check a workspace link or a stale
lib/ in the checkout cannot pass for: it reads only what files selected.
The family declares its executable, so the vendored family — libraries a
consumer imports, with no executable — states that it has none instead of
carrying a probe that would prove nothing.
Both pack workflows run it after packing, still without credentials.
A release family owns its member discovery, version baseline, tag naming, and
packed-payload rule; the dsh family shares one version across packages/ and
apps/, while every vendor/ package keeps its own version line. Publish order is
topological over runtime dependencies so no package reaches the registry before
one it depends on.
pack packs the whole family into one directory and records the upload order;
publish decides per package against the registry, skipping a version whose
published tarball has the same integrity and failing when it differs, which is
what makes re-running publish over one artifact safe.
The vendored packages keep upstream's payload: their manifests export ./src/*,
so the harness rule that rejects sources and declaration maps would publish an
export map pointing at absent files.
imccyu
imccyu
Tianyi Cui