up

code/demo/GDEQ031T10_Arduino/Display_EPD_W21.cpp

@@ -0,0 +1,392 @@
+#include "Display_EPD_W21_spi.h"
+#include "Display_EPD_W21.h"
+
+unsigned char oldData[12480];
+unsigned char oldDataP[256];
+unsigned char oldDataA[256];
+unsigned char oldDataB[256];
+unsigned char oldDataC[256];
+unsigned char oldDataD[256];
+unsigned char oldDataE[256];
+unsigned char partFlag=1;
+
+void lcd_chkstatus(void)
+{
+  while(!isEPD_W21_BUSY); //0:BUSY, 1:FREE
+                     
+}
+
+//UC8253
+void EPD_Init(void)
+{ 
+  EPD_W21_RST_0;    // Module reset
+  delay(10);//At least 10ms delay 
+  EPD_W21_RST_1;
+  delay(10);//At least 10ms delay 
+  
+  EPD_W21_WriteCMD(0x00);     // panel setting   PSR
+  EPD_W21_WriteDATA(0x1F);      // RES1 RES0 REG KW/R     UD    SHL   SHD_N  RST_N   0xFF=LUT from register,0xDF=LUT from OTP. (Default)
+
+  EPD_W21_WriteCMD(0x04);  //Power on
+  lcd_chkstatus();        //waiting for the electronic paper IC to release the idle signal
+}
+void EPD_Init_Fast(void) //1.0s
+{ 
+  EPD_W21_RST_0;    // Module reset
+  delay(10);//At least 10ms delay 
+  EPD_W21_RST_1;
+  delay(10);//At least 10ms delay 
+
+  EPD_W21_WriteCMD(0x00);     // panel setting   PSR
+  EPD_W21_WriteDATA(0x1F);      // RES1 RES0 REG KW/R     UD    SHL   SHD_N  RST_N   0xFF=LUT from register,0xDF=LUT from OTP. (Default)
+  
+  EPD_W21_WriteCMD(0x04);  //Power on
+  lcd_chkstatus();        //waiting for the electronic paper IC to release the idle signal
+
+  EPD_W21_WriteCMD(0xE0);
+  EPD_W21_WriteDATA(0x02); 
+
+  EPD_W21_WriteCMD(0xE5);
+  EPD_W21_WriteDATA(0x5A);  
+
+} 
+void EPD_init_Fast2(void) //1.5s
+{ 
+  EPD_W21_RST_0;    // Module reset
+  delay(10);//At least 10ms delay 
+  EPD_W21_RST_1;
+  delay(10);//At least 10ms delay 
+
+  EPD_W21_WriteCMD(0x00);     // panel setting   PSR
+  EPD_W21_WriteDATA(0x1F);      // RES1 RES0 REG KW/R     UD    SHL   SHD_N  RST_N   0xFF=LUT from register,0xDF=LUT from OTP. (Default)
+  
+  EPD_W21_WriteCMD(0x04);  //Power on
+  lcd_chkstatus();        //waiting for the electronic paper IC to release the idle signal
+
+  EPD_W21_WriteCMD(0xE0);
+  EPD_W21_WriteDATA(0x02); 
+
+  EPD_W21_WriteCMD(0xE5);
+  EPD_W21_WriteDATA(0x6E);  
+} 
+void EPD_Init_Part(void)
+{ 
+  EPD_W21_RST_0;    // Module reset
+  delay(10);//At least 10ms delay 
+  EPD_W21_RST_1;
+  delay(10);//At least 10ms delay 
+
+  EPD_W21_WriteCMD(0x00);     // panel setting   PSR
+  EPD_W21_WriteDATA(0x1F);      // RES1 RES0 REG KW/R     UD    SHL   SHD_N  RST_N   0xFF=LUT from register,0xDF=LUT from OTP. (Default)
+  
+  EPD_W21_WriteCMD(0x04);  //Power on
+  lcd_chkstatus();        //waiting for the electronic paper IC to release the idle signal
+
+  EPD_W21_WriteCMD(0xE0);
+  EPD_W21_WriteDATA(0x02); 
+
+  EPD_W21_WriteCMD(0xE5);
+  EPD_W21_WriteDATA(0x79);
+    
+  EPD_W21_WriteCMD(0x50); 
+  EPD_W21_WriteDATA(0xD7); 
+  
+} 
+void EPD_DeepSleep(void)
+{
+  EPD_W21_WriteCMD(0X02);   //power off
+  lcd_chkstatus();          //waiting for the electronic paper IC to release the idle signal
+  delay(100);//At least 100ms delay 
+  EPD_W21_WriteCMD(0X07);   //deep sleep
+  EPD_W21_WriteDATA(0xA5); 
+  
+}
+void Power_off(void)
+{ 
+  EPD_W21_WriteCMD(0x02); //POWER ON
+  lcd_chkstatus();
+}
+//Full screen refresh update function
+void EPD_Update(void)
+{   
+  //Refresh
+  EPD_W21_WriteCMD(0x12);   //DISPLAY REFRESH   
+  delay(1);              //!!!The delay here is necessary, 200uS at least!!!     
+  lcd_chkstatus();          //waiting for the electronic paper IC to release the idle signal
+}
+void EPD_WhiteScreen_ALL(const unsigned char *datas)
+{
+    unsigned int i;
+    //Write Data
+    EPD_W21_WriteCMD(0x10);        //Transfer old data
+    for(i=0;i<EPD_ARRAY;i++)    
+    { 
+       EPD_W21_WriteDATA(oldData[i]);  //Transfer the actual displayed data
+    } 
+    EPD_W21_WriteCMD(0x13);        //Transfer new data
+    for(i=0;i<EPD_ARRAY;i++)       
+    {
+      EPD_W21_WriteDATA(datas[i]);  //Transfer the actual displayed data
+       oldData[i]=datas[i]; 
+    }   
+    EPD_Update();    
+    Power_off();
+}
+
+//Clear screen display
+void EPD_WhiteScreen_White(void)
+{
+    unsigned int i;
+    //Write Data
+    EPD_W21_WriteCMD(0x10);      
+    for(i=0;i<EPD_ARRAY;i++)       
+    {
+      EPD_W21_WriteDATA(oldData[i]);  
+    }
+    EPD_W21_WriteCMD(0x13);      
+    for(i=0;i<EPD_ARRAY;i++)       
+    {
+      EPD_W21_WriteDATA(0xff);  
+      oldData[i]=0xff; 
+    }
+    EPD_Update();    
+    Power_off();
+}
+//Display all black
+void EPD_WhiteScreen_Black(void)
+{
+    unsigned int i;
+    //Write Data
+    EPD_W21_WriteCMD(0x10);      
+    for(i=0;i<EPD_ARRAY;i++)       
+    {
+      EPD_W21_WriteDATA(oldData[i]);  
+    }
+    EPD_W21_WriteCMD(0x13);      
+    for(i=0;i<EPD_ARRAY;i++)       
+    {
+      EPD_W21_WriteDATA(0x00);  
+      oldData[i]=0x00; 
+    }
+    EPD_Update();    
+    Power_off();
+}
+//Partial refresh of background display, this function is necessary, please do not delete it!!!
+void EPD_SetRAMValue_BaseMap( const unsigned char * datas)
+{
+  unsigned int i; 
+  EPD_W21_WriteCMD(0x10);  //write old data 
+  for(i=0;i<EPD_ARRAY;i++)
+   {               
+     EPD_W21_WriteDATA(oldData[i]);
+   }
+  EPD_W21_WriteCMD(0x13);  //write new data 
+  for(i=0;i<EPD_ARRAY;i++)
+   {               
+     EPD_W21_WriteDATA(datas[i]);
+      oldData[i]=datas[i]; 
+   }   
+    EPD_Update();    
+    Power_off();   
+   
+}
+void EPD_Dis_Part(unsigned int x_start,unsigned int y_start,const unsigned char * datas,unsigned int PART_COLUMN,unsigned int PART_LINE)
+{
+unsigned int i;
+unsigned int x_end,y_end; 
+  x_start=x_start-x_start%8;
+  x_end=x_start+PART_LINE-1; 
+  y_end=y_start+PART_COLUMN-1;
+
+    EPD_Init_Part();  
+  
+    EPD_W21_WriteCMD(0x91);   //This command makes the display enter partial mode
+    EPD_W21_WriteCMD(0x90);   //resolution setting
+    EPD_W21_WriteDATA (x_start);   //x-start     
+    EPD_W21_WriteDATA (x_end);   //x-end  
+
+    EPD_W21_WriteDATA (y_start/256);
+    EPD_W21_WriteDATA (y_start%256);   //y-start    
+    
+    EPD_W21_WriteDATA (y_end/256);    
+    EPD_W21_WriteDATA (y_end%256);  //y-end
+    EPD_W21_WriteDATA (0x01); 
+ 
+    if(partFlag==1) 
+     {
+        partFlag=0;
+       
+        EPD_W21_WriteCMD(0x10);        //writes Old data to SRAM for programming
+        for(i=0;i<PART_COLUMN*PART_LINE/8;i++)      
+           EPD_W21_WriteDATA(0xFF); 
+     }
+    else
+     {
+        EPD_W21_WriteCMD(0x10);        //writes Old data to SRAM for programming
+        for(i=0;i<PART_COLUMN*PART_LINE/8;i++)      
+           EPD_W21_WriteDATA(oldDataP[i]);  
+      } 
+ 
+    EPD_W21_WriteCMD(0x13);        //writes New data to SRAM.
+    for(i=0;i<PART_COLUMN*PART_LINE/8;i++)       
+   {
+    EPD_W21_WriteDATA(datas[i]);
+    oldDataP[i]=datas[i];
+   } 
+    EPD_Update();    
+    Power_off();  
+    
+}
+
+
+//Full screen partial refresh display
+void EPD_Dis_PartAll(const unsigned char * datas)
+{
+    unsigned int i;
+    EPD_Init_Part();
+    //Write Data
+    EPD_W21_WriteCMD(0x10);        //Transfer old data
+    for(i=0;i<EPD_ARRAY;i++)    
+    { 
+       EPD_W21_WriteDATA(oldData[i]);  //Transfer the actual displayed data
+    } 
+    EPD_W21_WriteCMD(0x13);        //Transfer new data
+    for(i=0;i<EPD_ARRAY;i++)       
+    {
+      EPD_W21_WriteDATA(datas[i]);  //Transfer the actual displayed data
+       oldData[i]=datas[i]; 
+    }  
+      
+    EPD_Update();    
+    Power_off();    
+
+}
+
+//Partial refresh write address and data
+void EPD_Dis_Part_RAM(unsigned int x_start,unsigned int y_start,
+                        const unsigned char * datas_A,const unsigned char * datas_B,
+                        const unsigned char * datas_C,const unsigned char * datas_D,const unsigned char * datas_E,
+                        unsigned char num,unsigned int PART_COLUMN,unsigned int PART_LINE)
+{
+  unsigned int i,j,x_end,y_end;
+  x_start=x_start-x_start%8;
+  x_end=x_start+PART_LINE*num-1; 
+  y_end=y_start+PART_COLUMN-1;
+
+    EPD_Init_Part();  
+    EPD_W21_WriteCMD(0x91);   //This command makes the display enter partial mode
+    EPD_W21_WriteCMD(0x90);   //resolution setting
+    EPD_W21_WriteDATA (x_start);   //x-start     
+    EPD_W21_WriteDATA (x_end);   //x-end  
+
+    EPD_W21_WriteDATA (y_start/256);
+    EPD_W21_WriteDATA (y_start%256);   //y-start    
+    
+    EPD_W21_WriteDATA (y_end/256);    
+    EPD_W21_WriteDATA (y_end%256);  //y-end
+    EPD_W21_WriteDATA (0x01); 
+
+
+  if(partFlag==1) 
+   {
+      partFlag=0;
+     
+      EPD_W21_WriteCMD(0x10);        //writes Old data to SRAM for programming
+      for(i=0;i<PART_COLUMN*PART_LINE*num/8;i++)      
+         EPD_W21_WriteDATA(0xFF); 
+   }
+  else
+   {
+      EPD_W21_WriteCMD(0x10);        //writes Old data to SRAM for programming
+      for(i=0;i<PART_COLUMN;i++)       
+       {
+          for(j=0;j<PART_LINE/8;j++)       
+            EPD_W21_WriteDATA(oldDataA[i*PART_LINE/8+j]);   
+          for(j=0;j<PART_LINE/8;j++)       
+            EPD_W21_WriteDATA(oldDataB[i*PART_LINE/8+j]);  
+          for(j=0;j<PART_LINE/8;j++)       
+            EPD_W21_WriteDATA(oldDataC[i*PART_LINE/8+j]);   
+          for(j=0;j<PART_LINE/8;j++)       
+            EPD_W21_WriteDATA(oldDataD[i*PART_LINE/8+j]);   
+          for(j=0;j<PART_LINE/8;j++)       
+            EPD_W21_WriteDATA(oldDataE[i*PART_LINE/8+j]);        
+       }            
+       
+    } 
+ 
+
+  EPD_W21_WriteCMD(0x13);        //writes New data to SRAM.
+  for(i=0;i<PART_COLUMN;i++)       
+   {
+      for(j=0;j<PART_LINE/8;j++)       
+      {
+        EPD_W21_WriteDATA(datas_A[i*PART_LINE/8+j]); 
+        oldDataA[i*PART_LINE/8+j]=datas_A[i*PART_LINE/8+j];
+      }         
+
+      for(j=0;j<PART_LINE/8;j++)    
+      {       
+        EPD_W21_WriteDATA(datas_B[i*PART_LINE/8+j]);  
+        oldDataB[i*PART_LINE/8+j]=datas_B[i*PART_LINE/8+j];
+      }
+      for(j=0;j<PART_LINE/8;j++)    
+      {       
+        EPD_W21_WriteDATA(datas_C[i*PART_LINE/8+j]);    
+        oldDataC[i*PART_LINE/8+j]=datas_C[i*PART_LINE/8+j];
+      }
+      for(j=0;j<PART_LINE/8;j++)  
+      {       
+        EPD_W21_WriteDATA(datas_D[i*PART_LINE/8+j]);  
+        oldDataD[i*PART_LINE/8+j]=datas_D[i*PART_LINE/8+j];
+      }
+      for(j=0;j<PART_LINE/8;j++)   
+      {
+        EPD_W21_WriteDATA(datas_E[i*PART_LINE/8+j]);    
+        oldDataE[i*PART_LINE/8+j]=datas_E[i*PART_LINE/8+j]; 
+      }
+   }  
+    
+}
+//Clock display
+void EPD_Dis_Part_Time(unsigned int x_start,unsigned int y_start,
+                        const unsigned char * datas_A,const unsigned char * datas_B,
+                        const unsigned char * datas_C,const unsigned char * datas_D,const unsigned char * datas_E,
+                        unsigned char num,unsigned int PART_COLUMN,unsigned int PART_LINE)
+{
+  EPD_Dis_Part_RAM(x_start,y_start,datas_A,datas_B,datas_C,datas_D,datas_E,num,PART_COLUMN,PART_LINE);
+  EPD_Update();
+  Power_off();  
+}                        
+
+
+
+////////////////////////////////Other newly added functions////////////////////////////////////////////
+//Display rotation 180 degrees initialization
+void EPD_Init_180(void)
+{
+  EPD_W21_RST_0;  // Module reset   
+  delay(10);//At least 10ms delay 
+  EPD_W21_RST_1;
+  delay(10); //At least 10ms delay 
+  
+  EPD_W21_WriteCMD(0x00);
+  EPD_W21_WriteDATA(0x13); //180 mirror
+  
+  EPD_W21_WriteCMD(0x04); //POWER ON
+  delay(300);  
+  lcd_chkstatus();
+  
+  EPD_W21_WriteCMD(0X50);  //VCOM AND DATA INTERVAL SETTING     
+  EPD_W21_WriteDATA(0x97); //WBmode:VBDF 17|D7 VBDW 97 VBDB 57    WBRmode:VBDF F7 VBDW 77 VBDB 37  VBDR B7  
+  
+}
+
+
+
+
+
+
+
+/***********************************************************
+            end file
+***********************************************************/

code/demo/GDEQ031T10_Arduino/Display_EPD_W21.h

@@ -0,0 +1,33 @@
+#ifndef _DISPLAY_EPD_W21_H_
+#define _DISPLAY_EPD_W21_H_
+
+
+#define EPD_WIDTH   240 
+#define EPD_HEIGHT  320
+#define EPD_ARRAY  EPD_WIDTH*EPD_HEIGHT/8  
+
+
+//Full screen refresh display
+void EPD_Init(void); 
+void EPD_Init_180(void);  
+void EPD_WhiteScreen_ALL(const unsigned char *datas);
+void EPD_WhiteScreen_White(void);
+void EPD_WhiteScreen_Black(void);
+void EPD_DeepSleep(void);
+//Partial refresh display 
+void EPD_Init_Part(void);
+void EPD_SetRAMValue_BaseMap(const unsigned char * datas);
+void EPD_Dis_PartAll(const unsigned char * datas);
+void EPD_Dis_Part(unsigned int x_start,unsigned int y_start,const unsigned char * datas,unsigned int PART_COLUMN,unsigned int PART_LINE);
+void EPD_Dis_Part_Time(unsigned int x_start,unsigned int y_start,
+                        const unsigned char * datas_A,const unsigned char * datas_B,
+                        const unsigned char * datas_C,const unsigned char * datas_D,const unsigned char * datas_E,
+                        unsigned char num,unsigned int PART_COLUMN,unsigned int PART_LINE);                    
+//Fast refresh display
+void EPD_Init_Fast(void);
+void EPD_WhiteScreen_ALL_Fast(const unsigned char *datas);   
+//GUI display       
+void EPD_Init_GUI(void);                        
+void EPD_Display(unsigned char *Image); 
+                         
+#endif

code/demo/GDEQ031T10_Arduino/Display_EPD_W21_spi.cpp

@@ -0,0 +1,25 @@
+#include "Display_EPD_W21_spi.h"
+#include <SPI.h>
+
+//SPI write byte
+void SPI_Write(unsigned char value)
+{				   			 
+   SPI.transfer(value);
+}
+
+//SPI write command
+void EPD_W21_WriteCMD(unsigned char command)
+{
+	EPD_W21_CS_0;
+	EPD_W21_DC_0;  // D/C#   0:command  1:data  
+	SPI_Write(command);
+	EPD_W21_CS_1;
+}
+//SPI write data
+void EPD_W21_WriteDATA(unsigned char datas)
+{
+	EPD_W21_CS_0;
+	EPD_W21_DC_1;  // D/C#   0:command  1:data
+	SPI_Write(datas);
+	EPD_W21_CS_1;
+}

code/demo/GDEQ031T10_Arduino/Display_EPD_W21_spi.h

@@ -0,0 +1,22 @@
+#ifndef _DISPLAY_EPD_W21_SPI_
+#define _DISPLAY_EPD_W21_SPI_
+#include "Arduino.h"
+
+//IO settings
+//SCK--GPIO23(SCLK)
+//SDIN---GPIO18(MOSI)
+#define isEPD_W21_BUSY digitalRead(A14)  //BUSY
+#define EPD_W21_RST_0 digitalWrite(A15,LOW)  //RES
+#define EPD_W21_RST_1 digitalWrite(A15,HIGH)
+#define EPD_W21_DC_0  digitalWrite(A16,LOW) //DC
+#define EPD_W21_DC_1  digitalWrite(A16,HIGH)
+#define EPD_W21_CS_0 digitalWrite(A17,LOW) //CS
+#define EPD_W21_CS_1 digitalWrite(A17,HIGH)
+
+
+void SPI_Write(unsigned char value);
+void EPD_W21_WriteDATA(unsigned char datas);
+void EPD_W21_WriteCMD(unsigned char command);
+
+
+#endif 

code/demo/GDEQ031T10_Arduino/GDEQ031T10_Arduino.ino

@@ -0,0 +1,94 @@
+#include <SPI.h>
+//EPD
+#include "Display_EPD_W21_spi.h"
+#include "Display_EPD_W21.h"
+#include "Ap_29demo.h"  
+
+void setup() {
+   pinMode(A14, INPUT);  //BUSY
+   pinMode(A15, OUTPUT); //RES 
+   pinMode(A16, OUTPUT); //DC   
+   pinMode(A17, OUTPUT); //CS   
+   //SPI
+   SPI.beginTransaction(SPISettings(10000000, MSBFIRST, SPI_MODE0)); 
+   SPI.begin ();  
+}
+
+//Tips//
+/*
+1.Flickering is normal when EPD is performing a full screen update to clear ghosting from the previous image so to ensure better clarity and legibility for the new image.
+2.There will be no flicker when EPD performs a partial refresh.
+3.Please make sue that EPD enters sleep mode when refresh is completed and always leave the sleep mode command. Otherwise, this may result in a reduced lifespan of EPD.
+4.Please refrain from inserting EPD to the FPC socket or unplugging it when the MCU is being powered to prevent potential damage.)
+5.Re-initialization is required for every full screen update.
+6.When porting the program, set the BUSY pin to input mode and other pins to output mode.
+*/
+void loop() {
+   unsigned char i;
+#if 1 //Full screen refresh, fast refresh, and partial refresh demostration.
+
+      EPD_Init(); //Full screen refresh initialization.
+      EPD_WhiteScreen_White(); //Clear screen function.
+      EPD_DeepSleep(); //Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s. 
+     /************Full display(2s)*******************/
+      EPD_Init(); //Full screen refresh initialization.
+      EPD_WhiteScreen_ALL(gImage_1); //To Display one image using full screen refresh.
+      EPD_DeepSleep(); //Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s. 
+      /************Fast refresh mode(1.5s)*******************/
+      EPD_Init_Fast(); //Fast refresh initialization.
+      EPD_WhiteScreen_ALL(gImage_1); //To display one image using fast refresh.
+      EPD_DeepSleep(); //Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s.
+  #if 1 //Partial refresh demostration.
+  //Partial refresh demo support displaying a clock at 5 locations with 00:00.  If you need to perform partial refresh more than 5 locations, please use the feature of using partial refresh at the full screen demo.
+  //After 5 partial refreshes, implement a full screen refresh to clear the ghosting caused by partial refreshes.
+  //////////////////////Partial refresh time demo/////////////////////////////////////
+      EPD_Init(); //Electronic paper initialization.  
+      EPD_SetRAMValue_BaseMap(gImage_basemap); //Please do not delete the background color function, otherwise it will cause unstable display during partial refresh. 
+      for(i=0;i<6;i++)
+      {
+        EPD_Dis_Part_Time(40,150,Num[1],Num[0],gImage_numdot,Num[0],Num[i],5,64,32); //x,y,DATA-A~E,number,Resolution 32*64         
+      }       
+      EPD_DeepSleep();  //Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s.
+        
+      EPD_Init(); //Full screen refresh initialization.
+      EPD_WhiteScreen_White(); //Clear screen function.
+      EPD_DeepSleep(); //Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s.
+  #endif  
+  
+  #if 0   //Demo of using partial refresh to update the full screen, to enable this feature, please change 0 to 1.
+  //After 5 partial refreshes, implement a full screen refresh to clear the ghosting caused by partial refreshes.
+  //////////////////////Partial refresh time demo/////////////////////////////////////
+      EPD_Init(); //Full screen refresh initialization.
+      EPD_WhiteScreen_White(); //Clear screen function.   
+      EPD_Dis_PartAll(gImage_p1);
+      EPD_Dis_PartAll(gImage_p2);
+      EPD_Dis_PartAll(gImage_p3);
+      EPD_DeepSleep();//Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s. 
+      
+      EPD_Init(); //Full screen refresh initialization.
+      EPD_WhiteScreen_White(); //Clear screen function.
+      EPD_DeepSleep(); //Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s.
+  #endif
+  
+  #if 0 //Demonstration of full screen refresh with 180-degree rotation, to enable this feature, please change 0 to 1.
+      /************Full display(2s)*******************/
+      EPD_Init_180(); //Full screen refresh initialization.
+      EPD_WhiteScreen_ALL(gImage_1); //To Display one image using full screen refresh.
+      EPD_DeepSleep(); //Enter the sleep mode and please do not delete it, otherwise it will reduce the lifespan of the screen.
+      delay(2000); //Delay for 2s.
+  #endif        
+#endif
+ while(1);  // The program stops here   
+}
+
+
+
+
+//////////////////////////////////END//////////////////////////////////////////////////

code/hello_world_01/.vscode/settings.json

@@ -3,7 +3,7 @@
   "idf.openOcdConfigs": [
     "board/esp32s3-builtin.cfg"
   ],
-  "idf.portWin": "COM10",
+  "idf.portWin": "COM9",
   "idf.currentSetup": "C:\\esp\\v5.5.3\\esp-idf",
   "idf.customExtraVars": {
     "OPENOCD_SCRIPTS": "C:\\Espressif\\tools\\openocd-esp32\\v0.11.0-esp32-20220411/openocd-esp32/share/openocd/scripts",

code/hello_world_01/main/epaper.h

@@ -13,6 +13,7 @@
 #define EPD_CS_PIN    34
 #define EPD_DC_PIN    35  
 #define EPD_BUSY_PIN  37
+#define EPD_RST_PIN   16
 
 /********************* 屏幕参数定义 *********************/
 #define EPD_WIDTH     320     // 屏幕宽度

code/hello_world_01/main/hello_world_main.c

@@ -69,15 +69,15 @@ void app_main(void)
 
     spi_init();
     epd_init();
-    epd_clear(1);
+    //epd_clear(1);
-    // 3. 画测试点（黑色）
+    // // 3. 画测试点（黑色）
-    epd_draw_point(50, 50, 0);   // (50,50) 黑点
+    // epd_draw_point(50, 50, 0);   // (50,50) 黑点
-    epd_draw_point(50, 60, 0);   // (50,60) 黑点
+    // epd_draw_point(50, 60, 0);   // (50,60) 黑点
-    epd_draw_point(60, 50, 0);   // (60,50) 黑点
+    // epd_draw_point(60, 50, 0);   // (60,50) 黑点
-    epd_draw_point(60, 60, 0);   // (60,60) 黑点
+    // epd_draw_point(60, 60, 0);   // (60,60) 黑点
 
-    // 4. 刷新屏幕
+    // // 4. 刷新屏幕
-    epd_refresh();
+    // epd_refresh();
 
 
     // 1. 初始化 SPIFFS

code/hello_world_01/main/spi.c

@@ -59,15 +59,7 @@ void spi_init()
 }
 
 
-/**
+esp_err_t spi_send_sync_fullduplex(const uint8_t *tx_data, uint8_t *rx_data, size_t len)
- * @brief 同步SPI全双工传输函数（无队列，直接硬件收发）
- * @param tx_data: 待发送数据缓冲区（NULL则仅接收）
- * @param rx_data: 接收数据缓冲区（NULL则仅发送）
- * @param len: 传输长度（字节数，收发长度一致）
- * @return esp_err_t: 传输结果
- * @note 全双工模式下，发送和接收同时进行，len需匹配收发数据长度
- */
-esp_err_t epd_spi_send_sync_fullduplex(const uint8_t *tx_data, uint8_t *rx_data, size_t len)
 {
     esp_err_t ret;
     // ret = spi_device_set_speed(spi2, speed * 1000 * 1000);
@@ -105,3 +97,17 @@ esp_err_t epd_spi_send_sync_fullduplex(const uint8_t *tx_data, uint8_t *rx_data,
 
     return ret;
 }
+
+// SPI 写数据
+esp_err_t spi_send_data_8(uint8_t data)
+{
+  spi_transaction_t trans = {
+      .length = 8,                   // 数据位数
+      .flags = SPI_TRANS_USE_TXDATA, // 必须加这个标志
+  };
+  trans.tx_data[0] = (data);
+
+  esp_err_t err = spi_device_transmit(spi2, &trans);
+
+  return err;
+}

code/hello_world_01/main/spi.h

@@ -15,7 +15,8 @@
 
 
 void spi_init();
-esp_err_t epd_spi_send_sync_fullduplex(const uint8_t *tx_data, uint8_t *rx_data, size_t len);
+esp_err_t spi_send_sync_fullduplex(const uint8_t *tx_data, uint8_t *rx_data, size_t len);
+esp_err_t spi_send_data_8(uint8_t data);
 
 extern spi_device_handle_t spi2;
 

code/hello_world_01/sdkconfig

@@ -1,6 +1,6 @@
 #
 # Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.5.3 Project Configuration
+# Espressif IoT Development Framework (ESP-IDF) 5.5.2 Project Configuration
 #
 CONFIG_SOC_ADC_SUPPORTED=y
 CONFIG_SOC_UART_SUPPORTED=y
@@ -370,7 +370,6 @@ CONFIG_SOC_WIFI_HW_TSF=y
 CONFIG_SOC_WIFI_FTM_SUPPORT=y
 CONFIG_SOC_WIFI_GCMP_SUPPORT=y
 CONFIG_SOC_WIFI_WAPI_SUPPORT=y
-CONFIG_SOC_WIFI_TXOP_SUPPORT=y
 CONFIG_SOC_WIFI_CSI_SUPPORT=y
 CONFIG_SOC_WIFI_MESH_SUPPORT=y
 CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y
@@ -698,7 +697,6 @@ CONFIG_USJ_ENABLE_USB_SERIAL_JTAG=y
 #
 # Hardware Settings
 #
-CONFIG_ESP_HW_SUPPORT_FUNC_IN_IRAM=y
 
 #
 # Chip revision
@@ -759,8 +757,6 @@ CONFIG_RTC_CLK_SRC_INT_RC=y
 # CONFIG_RTC_CLK_SRC_EXT_OSC is not set
 # CONFIG_RTC_CLK_SRC_INT_8MD256 is not set
 CONFIG_RTC_CLK_CAL_CYCLES=1024
-CONFIG_RTC_CLK_FUNC_IN_IRAM=y
-CONFIG_RTC_TIME_FUNC_IN_IRAM=y
 # end of RTC Clock Config
 
 #