Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-06 16:14:00 +08:00
parent 47d5814325
commit 1ad2934389
1451 changed files with 242614 additions and 0 deletions
@@ -0,0 +1,80 @@
+[nrf52840_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/5f838d2709461a2c981f642917aa50254a25c14c.zip
+
+; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
+
+; We want the initial breakpoint at setup() instead of main().  Also we want to enable semihosting at that point so instead of
+debug_init_break = tbreak setup
+; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
+; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
+; debug_init_break = tbreak main
+
+; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
+; (for use by meshtastic command line)
+;  monitor arm semihosting disable
+;  monitor debug_level 3
+;
+; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
+; for stdio access.
+;   monitor arm semihosting_redirect tcp 5555 stdio
+
+; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
+; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
+debug_extra_cmds =
+  echo Running .gdbinit script
+  ;monitor arm semihosting enable
+  ;monitor arm semihosting_fileio enable
+  ;monitor arm semihosting_redirect disable
+  commands 1
+  ; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
+  ; set wantSemihost = 1
+  set useSoftDevice = 0
+  end
+
+  ; Only reprogram the board if the code has changed
+debug_load_mode = modified
+;debug_load_mode = manual
+; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
+;debug_tool = jlink
+debug_tool = stlink
+debug_speed = 4000
+;debug_tool = custom
+; debug_server =
+;  openocd
+;  -f
+;  /usr/local/share/openocd/scripts/interface/stlink.cfg
+;  -f
+;  /usr/local/share/openocd/scripts/target/nrf52.cfg
+; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
+;debug_server =
+;  pyocd
+;  gdbserver
+;  -j
+;  ${platformio.workspace_dir}/..
+;  -t
+;  nrf52840
+;  --semihosting
+;  --elf
+;  ${platformio.build_dir}/${this.__env__}/firmware.elf
+
+; If you want to debug the semihosting support you can turn on extra logging in pyocd with
+;   -L
+;   pyocd.debug.semihost.trace=debug
+
+; The following is not needed because it automatically tries do this
+;debug_server_ready_pattern = -.*GDB server started on port \d+.*
+;debug_port = localhost:3333