Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-06 16:14:00 +08:00
parent 47d5814325
commit 1ad2934389
1451 changed files with 242614 additions and 0 deletions
@@ -0,0 +1,28 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 15;
+static const uint8_t SCL = 16;
+
+// Default SPI will be mapped to Radio
+static const uint8_t MISO = 37;
+static const uint8_t SCK = 35;
+static const uint8_t MOSI = 36;
+static const uint8_t SS = 14;
+
+static const uint8_t BAT_ADC_PIN = 26;
+
+// #define SPI_MOSI                    (11)
+// #define SPI_SCK                     (14)
+// #define SPI_MISO                    (2)
+// #define SPI_CS                      (13)
+
+// #define SDCARD_CS                   SPI_CS
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,26 @@
+[env:ESP32-S3-Pico]
+
+board_level = extra
+extends = esp32s3_base
+upload_protocol = esptool
+board = esp32-s3-pico
+board_build.partitions = default_16MB.csv
+
+board_upload.use_1200bps_touch = yes
+board_upload.wait_for_upload_port = yes
+board_upload.require_upload_port = yes
+
+;upload_port = /dev/ttyACM0
+
+build_flags = ${esp32s3_base.build_flags}
+  -DESP32_S3_PICO
+  ;-DPRIVATE_HW
+  -Ivariants/esp32s3/esp32-s3-pico
+  -DBOARD_HAS_PSRAM
+  -DEINK_DISPLAY_MODEL=GxEPD2_290_T94_V2
+  -DEINK_WIDTH=296
+  -DEINK_HEIGHT=128
+
+lib_deps = ${esp32s3_base.lib_deps}
+  zinggjm/GxEPD2@^1.6.2
+  adafruit/Adafruit NeoPixel @ ^1.12.0
@@ -0,0 +1,81 @@
+/*
+
+*/
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+#define EXT_NOTIFY_OUT 22
+#define BUTTON_PIN 0 // 17
+
+// #define LED_PIN PIN_LED
+// Board has RGB LED 21
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 1                     // How many neopixels are connected
+#define NEOPIXEL_DATA 21                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+// The usbPower state is revered ?
+// DEBUG | ??:??:?? 365 [Power] Battery: usbPower=0, isCharging=0, batMv=4116, batPct=90
+// DEBUG | ??:??:?? 385 [Power] Battery: usbPower=1, isCharging=1, batMv=4243, batPct=0
+
+// https://www.waveshare.com/img/devkit/ESP32-S3-Pico/ESP32-S3-Pico-details-inter-1.jpg
+// digram is incorrect labeled as battery pin is getting readings on GPIO7_CH1?
+#define BATTERY_PIN 7
+#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+// #define ADC_CHANNEL ADC1_GPIO6_CHANNEL
+//   ratio of voltage divider = 3.0 (R17=200k, R18=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
+
+#define I2C_SDA 15
+#define I2C_SCL 16
+
+// Enable secondary bus for external periherals
+// https://www.waveshare.com/wiki/Pico-OLED-1.3
+// #define USE_SH1107_128_64
+// Not working
+#define I2C_SDA1 17
+#define I2C_SCL1 18
+
+#define BUTTON_PIN 0 // This is the BOOT button
+#define BUTTON_NEED_PULLUP
+
+// #define USE_RF95 // RFM95/SX127x
+#define USE_SX1262
+// #define USE_SX1280
+
+#define LORA_MISO 37
+#define LORA_SCK 35
+#define LORA_MOSI 36
+#define LORA_CS 14
+
+#define LORA_RESET 40
+#define LORA_DIO1 4
+#define LORA_DIO2 13
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
+
+#ifdef USE_SX1280
+#define SX128X_CS LORA_CS
+#define SX128X_DIO1 LORA_DIO1
+#define SX128X_BUSY 9
+#define SX128X_RESET LORA_RESET
+#endif
+
+#define USE_EINK
+/*
+ * eink display pins
+ */
+#define PIN_EINK_CS 34
+#define PIN_EINK_BUSY 38
+#define PIN_EINK_DC 33
+#define PIN_EINK_RES 42 // 37 //(-1) // cant be MISO Waveshare ??)
+#define PIN_EINK_SCLK 35
+#define PIN_EINK_MOSI 36