Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-06 16:14:00 +08:00
parent 47d5814325
commit 1ad2934389
1451 changed files with 242614 additions and 0 deletions
@@ -0,0 +1,25 @@
+[env:wio-e5]
+extends = stm32_base
+board = lora_e5_dev_board
+board_level = pr
+board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
+build_flags =
+  ${stm32_base.build_flags}
+  -Ivariants/stm32/wio-e5
+  -DSERIAL_UART_INSTANCE=1
+  -DPIN_SERIAL_RX=PB7
+  -DPIN_SERIAL_TX=PB6
+  -DPIN_WIRE_SDA=PA15
+  -DPIN_WIRE_SCL=PB15
+  -DHAS_SENSOR=1
+  -DENABLE_HWSERIAL2
+  -DPIN_SERIAL2_TX=PA2
+  -DPIN_SERIAL2_RX=PA3
+  -DHAS_GPS=1
+  -DGPS_SERIAL_PORT=Serial2
+
+upload_port = stlink
+
+lib_deps =
+  ${stm32_base.lib_deps}
+  # Add your custom sensor here!
@@ -0,0 +1,8 @@
+/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
+ * Wio-E5 module ONLY transmits through RFO_HP
+ * Receive: PA4=1, PA5=0
+ * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
+static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[4] = {
+    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};
@@ -0,0 +1,27 @@
+/*
+Wio-E5 mini (formerly LoRa-E5 mini)
+https://www.seeedstudio.com/LoRa-E5-mini-STM32WLE5JC-p-4869.html
+https://www.seeedstudio.com/LoRa-E5-Wireless-Module-p-4745.html
+*/
+
+/*
+This variant is a work in progress.
+Do not expect a working Meshtastic device with this target.
+*/
+
+#ifndef _VARIANT_WIOE5_
+#define _VARIANT_WIOE5_
+
+#define USE_STM32WLx
+
+#define LED_PIN PB5
+#define LED_STATE_ON 0
+
+#define WIO_E5
+
+#if (defined(LED_BUILTIN) && LED_BUILTIN == PNUM_NOT_DEFINED)
+#undef LED_BUILTIN
+#define LED_BUILTIN (LED_PIN)
+#endif
+
+#endif