@@ -0,0 +1,56 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
// static const uint8_t LED_BUILTIN = -1;
|
||||
|
||||
// static const uint8_t TX = 43;
|
||||
// static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 10;
|
||||
static const uint8_t SCL = 11;
|
||||
|
||||
// Default SPI will be mapped to Radio
|
||||
static const uint8_t SS = 5;
|
||||
static const uint8_t MOSI = 1;
|
||||
static const uint8_t MISO = 4;
|
||||
static const uint8_t SCK = 3;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
@@ -0,0 +1,21 @@
|
||||
; LilyGo T-Watch S3
|
||||
[env:t-watch-s3]
|
||||
extends = esp32s3_base
|
||||
board = t-watch-s3
|
||||
board_check = true
|
||||
board_build.partitions = default_16MB.csv
|
||||
upload_protocol = esptool
|
||||
|
||||
build_flags = ${esp32_base.build_flags}
|
||||
-DT_WATCH_S3
|
||||
-Ivariants/esp32s3/t-watch-s3
|
||||
-DPCF8563_RTC=0x51
|
||||
-DHAS_BMA423=1
|
||||
|
||||
lib_deps = ${esp32s3_base.lib_deps}
|
||||
lovyan03/LovyanGFX@^1.2.0
|
||||
lewisxhe/PCF8563_Library@1.0.1
|
||||
adafruit/Adafruit DRV2605 Library@^1.2.2
|
||||
earlephilhower/ESP8266Audio@^1.9.9
|
||||
earlephilhower/ESP8266SAM@^1.0.1
|
||||
lewisxhe/SensorLib@0.2.0
|
||||
@@ -0,0 +1,79 @@
|
||||
// ST7789 TFT LCD
|
||||
#define ST7789_CS 12
|
||||
#define ST7789_RS 38 // DC
|
||||
#define ST7789_SDA 13 // MOSI
|
||||
#define ST7789_SCK 18
|
||||
#define ST7789_RESET -1
|
||||
#define ST7789_MISO -1
|
||||
#define ST7789_BUSY -1
|
||||
#define ST7789_BL 45
|
||||
#define ST7789_SPI_HOST SPI3_HOST
|
||||
#define TFT_BL 45
|
||||
#define SPI_FREQUENCY 40000000
|
||||
#define SPI_READ_FREQUENCY 16000000
|
||||
#define TFT_HEIGHT 240
|
||||
#define TFT_WIDTH 240
|
||||
#define TFT_OFFSET_X 0
|
||||
#define TFT_OFFSET_Y 0
|
||||
#define TFT_OFFSET_ROTATION 2
|
||||
#define SCREEN_ROTATE
|
||||
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
|
||||
|
||||
#define HAS_TOUCHSCREEN 1
|
||||
#define SCREEN_TOUCH_INT 16
|
||||
#define SCREEN_TOUCH_USE_I2C1
|
||||
#define TOUCH_I2C_PORT 1
|
||||
#define TOUCH_SLAVE_ADDRESS 0x38
|
||||
#define WAKE_ON_TOUCH
|
||||
|
||||
#define USE_POWERSAVE
|
||||
#define SLEEP_TIME 180
|
||||
|
||||
#define I2C_SDA1 39 // Used for capacitive touch
|
||||
#define I2C_SCL1 40 // Used for capacitive touch
|
||||
|
||||
#define HAS_I2S
|
||||
#define DAC_I2S_BCK 48
|
||||
#define DAC_I2S_WS 15
|
||||
#define DAC_I2S_DOUT 46
|
||||
#define DAC_I2S_MCLK 0
|
||||
|
||||
#define HAS_AXP2101
|
||||
|
||||
#define HAS_RTC 1
|
||||
|
||||
#define I2C_SDA 10 // For QMC6310 sensors and screens
|
||||
#define I2C_SCL 11 // For QMC6310 sensors and screens
|
||||
|
||||
#define BMA4XX_INT 14 // Interrupt for BMA_423 axis sensor
|
||||
|
||||
#define HAS_GPS 0
|
||||
#undef GPS_RX_PIN
|
||||
#undef GPS_TX_PIN
|
||||
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
|
||||
#define LORA_SCK 3
|
||||
#define LORA_MISO 4
|
||||
#define LORA_MOSI 1
|
||||
#define LORA_CS 5
|
||||
|
||||
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
||||
#define LORA_RESET 8
|
||||
#define LORA_DIO1 9 // SX1262 IRQ
|
||||
#define LORA_DIO2 7 // SX1262 BUSY
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
||||
|
||||
#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
// Not really an E22 but TTGO seems to be trying to clone that
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for
|
||||
// the sx1262interface code)
|
||||
|
||||
#define USE_VIRTUAL_KEYBOARD 1
|
||||
#define DISPLAY_CLOCK_FRAME 1
|
||||
Reference in New Issue
Block a user