up
This commit is contained in:
Binary file not shown.
+59
-2
@@ -10,5 +10,62 @@
|
||||
},
|
||||
"[powershell]": {
|
||||
"editor.defaultFormatter": "ms-vscode.powershell"
|
||||
}
|
||||
}
|
||||
},
|
||||
"C_Cpp_Runner.msvcBatchPath": "C:/Program Files/Microsoft Visual Studio/2022/Community/VC/Auxiliary/Build/vcvarsall.bat",
|
||||
"C_Cpp_Runner.cCompilerPath": "gcc",
|
||||
"C_Cpp_Runner.cppCompilerPath": "g++",
|
||||
"C_Cpp_Runner.debuggerPath": "gdb",
|
||||
"C_Cpp_Runner.cStandard": "",
|
||||
"C_Cpp_Runner.cppStandard": "",
|
||||
"C_Cpp_Runner.useMsvc": false,
|
||||
"C_Cpp_Runner.warnings": [
|
||||
"-Wall",
|
||||
"-Wextra",
|
||||
"-Wpedantic",
|
||||
"-Wshadow",
|
||||
"-Wformat=2",
|
||||
"-Wcast-align",
|
||||
"-Wconversion",
|
||||
"-Wsign-conversion",
|
||||
"-Wnull-dereference"
|
||||
],
|
||||
"C_Cpp_Runner.msvcWarnings": [
|
||||
"/W4",
|
||||
"/permissive-",
|
||||
"/w14242",
|
||||
"/w14287",
|
||||
"/w14296",
|
||||
"/w14311",
|
||||
"/w14826",
|
||||
"/w44062",
|
||||
"/w44242",
|
||||
"/w14905",
|
||||
"/w14906",
|
||||
"/w14263",
|
||||
"/w44265",
|
||||
"/w14928"
|
||||
],
|
||||
"C_Cpp_Runner.enableWarnings": true,
|
||||
"C_Cpp_Runner.warningsAsError": false,
|
||||
"C_Cpp_Runner.compilerArgs": [],
|
||||
"C_Cpp_Runner.linkerArgs": [],
|
||||
"C_Cpp_Runner.includePaths": [],
|
||||
"C_Cpp_Runner.includeSearch": [
|
||||
"*",
|
||||
"**/*"
|
||||
],
|
||||
"C_Cpp_Runner.excludeSearch": [
|
||||
"**/build",
|
||||
"**/build/**",
|
||||
"**/.*",
|
||||
"**/.*/**",
|
||||
"**/.vscode",
|
||||
"**/.vscode/**"
|
||||
],
|
||||
"C_Cpp_Runner.useAddressSanitizer": false,
|
||||
"C_Cpp_Runner.useUndefinedSanitizer": false,
|
||||
"C_Cpp_Runner.useLeakSanitizer": false,
|
||||
"C_Cpp_Runner.showCompilationTime": false,
|
||||
"C_Cpp_Runner.useLinkTimeOptimization": false,
|
||||
"C_Cpp_Runner.msvcSecureNoWarnings": false
|
||||
}
|
||||
@@ -1,3 +1,4 @@
|
||||
|
||||
; PlatformIO Project Configuration File
|
||||
; https://docs.platformio.org/page/projectconf.html
|
||||
|
||||
|
||||
+24
@@ -0,0 +1,24 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
static const uint8_t TX = 20;
|
||||
static const uint8_t RX = 21;
|
||||
|
||||
static const uint8_t SDA = 1;
|
||||
static const uint8_t SCL = 0;
|
||||
|
||||
static const uint8_t SS = 8;
|
||||
static const uint8_t MOSI = 7;
|
||||
static const uint8_t MISO = 6;
|
||||
static const uint8_t SCK = 10;
|
||||
|
||||
static const uint8_t A0 = 0;
|
||||
static const uint8_t A1 = 1;
|
||||
static const uint8_t A2 = 2;
|
||||
static const uint8_t A3 = 3;
|
||||
static const uint8_t A4 = 4;
|
||||
static const uint8_t A5 = 5;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
+27
@@ -0,0 +1,27 @@
|
||||
[env:esp32c3_moonshine_travelers_3]
|
||||
|
||||
extends = esp32c3_base
|
||||
board = esp32-c3-devkitm-1
|
||||
board_level = pr
|
||||
build_flags =
|
||||
${esp32c3_base.build_flags}
|
||||
-D PRIVATE_HW
|
||||
-I variants/esp32c3/diy/esp32c3_moonshine_travelers_3
|
||||
-D ARDUINO_USB_MODE=1
|
||||
-D ARDUINO_USB_CDC_ON_BOOT=1
|
||||
monitor_speed = 115200
|
||||
upload_protocol = esptool
|
||||
;upload_port = /dev/ttyUSB0
|
||||
upload_speed = 921600
|
||||
|
||||
|
||||
; ------------------- Flash 核心配置 -------------------
|
||||
; 1. Flash 容量（根据硬件实际值改，常见 4MB/8MB）
|
||||
board_build.flash_size = 4MB
|
||||
; 2. Flash 模式（ESP32-C3 推荐 dio）
|
||||
board_build.flash_mode = dio
|
||||
; 3. Flash 时钟频率（ESP32-C3 推荐 80MHz）
|
||||
board_build.flash_freq = 80MHz
|
||||
|
||||
; （可选）上传时的 Flash 配置（和上面保持一致即可）
|
||||
board_upload.flash_size = 4MB
|
||||
+142
@@ -0,0 +1,142 @@
|
||||
#define PIN_BUZZER 12
|
||||
#define BUZZER_PIN 12
|
||||
|
||||
#define BUTTON_PIN 9
|
||||
|
||||
// GPIO9 短按直接触发 SELECT（而非默认的 USER_PRESS 切换）
|
||||
// 长按无功能（关机由 POWER_BOOT 长按处理）
|
||||
#ifndef BUTTON_SINGLE_PRESS_EVENT
|
||||
#define BUTTON_SINGLE_PRESS_EVENT INPUT_BROKER_SELECT
|
||||
#endif
|
||||
#define BUTTON_DISABLE_LONG_PRESS 1
|
||||
|
||||
|
||||
#define HAS_SCREEN 1
|
||||
#define USE_SH1106
|
||||
|
||||
// 启用 CannedMessageModule（快捷回复/自由文本输入）
|
||||
#define CANNED_MESSAGE_MODULE_ENABLE 1
|
||||
|
||||
#define HAS_I2C 1
|
||||
#define WIRE_INTERFACES_COUNT (1)
|
||||
#define I2C_SDA 0
|
||||
#define I2C_SCL 1
|
||||
|
||||
#define HAS_GPS 1
|
||||
#define GPS_RX_PIN 21
|
||||
#define GPS_TX_PIN 20
|
||||
|
||||
|
||||
#define BATTERY_PIN 2
|
||||
#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
|
||||
#define ADC_MULTIPLIER 2.0f
|
||||
|
||||
// -----------------------------------------------------------------------
|
||||
// TCA9535PWR I²C IO 扩展器 — 4×4 矩阵键盘 + 电源控制 + LoRa RST
|
||||
// - 与屏幕共用 I²C 总线 (SDA=0, SCL=1)
|
||||
// - A0=0, A1=0, A2=0 → 地址 0x20 (TCA9535_I2C_ADDR)
|
||||
// - P0.0~P0.3 行输出（ROW0~ROW3），P0.4~P0.7 列输入（COL0~COL3）
|
||||
// - P1.0 键盘背光输出（高电平点亮，按键时亮 5 秒后自动熄灭）
|
||||
// - P1.2 电源使能（POWER_EN），高电平有效，驱动 MOS 管维持供电
|
||||
// - P1.3 电源开机按钮（POWER_BOOT），输入，低电平有效
|
||||
// 开机：持续按住 2 秒 → POWER_EN 拉高维持供电
|
||||
// 关机：运行中持续按住 2 秒 → POWER_EN 拉低断电
|
||||
// - P1.4 LoRa RST 输出（通过 I²C 控制 RadioLib 复位序列）
|
||||
// - P1.6 GPS_RST 输出（通过 tca9535GpsReset() 控制，init 中释放）
|
||||
// - P1.7 GPS_EN 输出（高电平有效，通过 enablePin 桥接到 TCA9535）
|
||||
// - P1.1 CHARGE_DET 输入（高电平=正在充电）
|
||||
// - 中断引脚 GPIO5，低电平有效，下降沿触发
|
||||
// -----------------------------------------------------------------------
|
||||
#define HAS_TCA9535_BUTTON
|
||||
#define TCA9535_INT_PIN 5 // TCA9535 INT → GPIO5（低电平有效，下降沿触发）
|
||||
#define TCA9535_POWER_EN_BIT (1u << 2) // P1.2 = 电源使能（高电平=开机）
|
||||
#define TCA9535_CHARGE_DET_PIN (1u << 1) // P1.1 = 充电检测输入（高电平=正在充电）
|
||||
|
||||
// 按键映射：4×4 矩阵，行优先排列
|
||||
// KEY[0]=ROW0·COL0, KEY[1]=ROW0·COL1, ..., KEY[15]=ROW3·COL3
|
||||
// 低电平有效（按下接地，列读取到低电平=按下）
|
||||
// 九宫格：key0~2=1~3, key4~6=4~6, key8~10=7~9, key12=*, key13=0, key14=#
|
||||
// 方向键：key3=UP, key7=DOWN, key11=LEFT, key15=RIGHT
|
||||
// SELECT 由 GPIO9 短按触发，CANCEL 由 POWER_BOOT(P1.3) 短按触发
|
||||
#define TCA9535_KEY_MAP \
|
||||
{ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key0 = ROW0·COL0 → '1' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key1 = ROW0·COL1 → '2' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key2 = ROW0·COL2 → '3' */ \
|
||||
INPUT_BROKER_UP, /* key3 = ROW0·COL3 */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key4 = ROW1·COL0 → '4' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key5 = ROW1·COL1 → '5' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key6 = ROW1·COL2 → '6' */ \
|
||||
INPUT_BROKER_DOWN, /* key7 = ROW1·COL3 */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key8 = ROW2·COL0 → '7' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key9 = ROW2·COL1 → '8' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key10 = ROW2·COL2 → '9' */ \
|
||||
INPUT_BROKER_LEFT, /* key11 = ROW2·COL3 */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key12 = ROW3·COL0 → '*' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key13 = ROW3·COL1 → '0' */ \
|
||||
INPUT_BROKER_MATRIXKEY, /* key14 = ROW3·COL2 → '#' */ \
|
||||
INPUT_BROKER_RIGHT, /* key15 = ROW3·COL3 */ \
|
||||
}
|
||||
|
||||
#define TCA9535_KEY_CHAR_MAP \
|
||||
{ \
|
||||
'1', /* key0 */ \
|
||||
'2', /* key1 */ \
|
||||
'3', /* key2 */ \
|
||||
0, /* key3 → 方向键 */ \
|
||||
'4', /* key4 */ \
|
||||
'5', /* key5 */ \
|
||||
'6', /* key6 */ \
|
||||
0, /* key7 → 方向键 */ \
|
||||
'7', /* key8 */ \
|
||||
'8', /* key9 */ \
|
||||
'9', /* key10 */ \
|
||||
0, /* key11 → 方向键 */ \
|
||||
'*', /* key12 */ \
|
||||
'0', /* key13 */ \
|
||||
'#', /* key14 */ \
|
||||
0, /* key15 → 方向键 */ \
|
||||
}
|
||||
|
||||
#define E22_400M33S
|
||||
#ifdef E22_400M33S
|
||||
#define SETTING_MAX_POWER 22
|
||||
#define NUM_PA_POINTS 1
|
||||
#define TX_GAIN_LORA 0
|
||||
#define SX126X_MAX_POWER 22
|
||||
//#define HAS_LORA_FEM 1
|
||||
#endif
|
||||
|
||||
#define USE_LLCC68
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
|
||||
// LoRa RST 通过 TCA9535 P1.4 控制
|
||||
// 使用虚拟引脚号 200，由自定义 HAL 拦截并转发到 I²C
|
||||
#define TCA9535_LORA_RST_VIRTUAL_PIN 200
|
||||
#define TCA9535_LORA_RST_REG TCA9535_REG_OUTPUT_P1 // P1 输出寄存器
|
||||
#define TCA9535_LORA_RST_BIT (1u << 4) // P1.4
|
||||
|
||||
// GPS RST (P1.6) 和 GPS EN (P1.7) 通过 TCA9535 I²C 控制
|
||||
// 不定义 PIN_GPS_RESET/PIN_GPS_EN 为虚拟引脚（避免 GpioHwPin 访问无效 GPIO）
|
||||
// 改为在 main.cpp 中 createGps() 后替换 enablePin 为 TCA9535 GpioPin
|
||||
#define TCA9535_GPS_HAS_CTRL 1
|
||||
|
||||
#define LORA_SCK 10
|
||||
#define LORA_MISO 6
|
||||
#define LORA_MOSI 7
|
||||
#define LORA_CS 8
|
||||
#define LORA_DIO0 RADIOLIB_NC
|
||||
#define LORA_RESET TCA9535_LORA_RST_VIRTUAL_PIN
|
||||
#define LORA_DIO1 3
|
||||
#define LORA_DIO2 RADIOLIB_NC
|
||||
#define LORA_BUSY 4
|
||||
#define SX126X_RXEN 13
|
||||
#define SX126X_CS LORA_CS
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_BUSY
|
||||
#define SX126X_RESET LORA_RESET
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
#define TCXO_OPTIONAL
|
||||
Reference in New Issue
Block a user