Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-03 22:16:00 +08:00
parent 7ae6e9e999
commit 88d56e1e9e
1660 changed files with 281430 additions and 0 deletions
@@ -0,0 +1,21 @@
+[env:heltec-v3]
+custom_meshtastic_hw_model = 43
+custom_meshtastic_hw_model_slug = HELTEC_V3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V3
+custom_meshtastic_images = heltec-v3.svg, heltec-v3-case.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+ 
+extends = esp32s3_base
+board = heltec_wifi_lora_32_V3
+board_level = pr
+board_check = true
+board_build.partitions = default_8MB.csv
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -D HELTEC_V3
+  -I variants/esp32s3/heltec_v3
+  -ULED_BUILTIN
@@ -0,0 +1,44 @@
+#define LED_POWER LED
+
+#define USE_SSD1306 // Heltec_v3 has a SSD1306 display
+
+#define RESET_OLED RST_OLED
+#define I2C_SDA SDA_OLED // I2C pins for this board
+#define I2C_SCL SCL_OLED
+
+// Enable secondary bus for external periherals
+#define I2C_SDA1 SDA
+#define I2C_SCL1 SCL
+
+#define VEXT_ENABLE Vext // active low, powers the oled display and the lora antenna boost
+#define BUTTON_PIN 0
+
+#define ADC_CTRL 37
+#define ADC_CTRL_ENABLED LOW
+#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
+#define ADC_MULTIPLIER 4.9 * 1.045
+
+#define USE_SX1262
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 12
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 13 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#define LORA_SCK 9
+#define LORA_MISO 11
+#define LORA_MOSI 10
+#define LORA_CS 8
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define HAS_32768HZ 1