Signed-off-by: 吴文峰 <kevin@lmve.net>
This commit is contained in:
@@ -0,0 +1,66 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define USB_VID 0x303a
|
||||
#define USB_PID 0x1001
|
||||
|
||||
static const uint8_t TX = 43;
|
||||
static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 4;
|
||||
static const uint8_t SCL = 3;
|
||||
|
||||
static const uint8_t SS = 8;
|
||||
static const uint8_t MOSI = 10;
|
||||
static const uint8_t MISO = 11;
|
||||
static const uint8_t SCK = 9;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
static const uint8_t Vext = 36;
|
||||
static const uint8_t LED = 35;
|
||||
static const uint8_t RST_OLED = 21;
|
||||
static const uint8_t SCL_OLED = 18;
|
||||
static const uint8_t SDA_OLED = 17;
|
||||
|
||||
static const uint8_t RST_LoRa = 12;
|
||||
static const uint8_t BUSY_LoRa = 13;
|
||||
static const uint8_t DIO0 = 14;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
@@ -0,0 +1,131 @@
|
||||
[heltec_v4_base]
|
||||
extends = esp32s3_base
|
||||
board = heltec_v4
|
||||
board_check = true
|
||||
board_build.partitions = default_16MB.csv
|
||||
build_flags =
|
||||
${esp32s3_base.build_flags}
|
||||
-D HELTEC_V4
|
||||
-I variants/esp32s3/heltec_v4
|
||||
|
||||
|
||||
[env:heltec-v4]
|
||||
custom_meshtastic_hw_model = 110
|
||||
custom_meshtastic_hw_model_slug = HELTEC_V4
|
||||
custom_meshtastic_architecture = esp32-s3
|
||||
custom_meshtastic_actively_supported = true
|
||||
custom_meshtastic_support_level = 1
|
||||
custom_meshtastic_display_name = Heltec V4
|
||||
custom_meshtastic_images = heltec_v4.svg
|
||||
custom_meshtastic_tags = Heltec
|
||||
custom_meshtastic_requires_dfu = true
|
||||
custom_meshtastic_partition_scheme = 16MB
|
||||
|
||||
extends = heltec_v4_base
|
||||
build_flags =
|
||||
${heltec_v4_base.build_flags}
|
||||
-D HELTEC_V4_OLED
|
||||
-D USE_SSD1306 ; Heltec_v4 has an SSD1315 display (compatible with SSD1306 driver)
|
||||
-D LED_POWER=35
|
||||
-D RESET_OLED=21
|
||||
-D I2C_SDA=17
|
||||
-D I2C_SCL=18
|
||||
-D I2C_SDA1=4
|
||||
-D I2C_SCL1=3
|
||||
|
||||
[env:heltec-v4-tft]
|
||||
custom_meshtastic_hw_model = 110
|
||||
custom_meshtastic_hw_model_slug = HELTEC_V4
|
||||
custom_meshtastic_architecture = esp32-s3
|
||||
custom_meshtastic_actively_supported = true
|
||||
custom_meshtastic_support_level = 1
|
||||
custom_meshtastic_display_name = Heltec V4 TFT
|
||||
custom_meshtastic_images = heltec_v4.svg
|
||||
custom_meshtastic_tags = Heltec
|
||||
custom_meshtastic_requires_dfu = true
|
||||
custom_meshtastic_partition_scheme = 16MB
|
||||
|
||||
extends = heltec_v4_base
|
||||
build_flags =
|
||||
${heltec_v4_base.build_flags} ;-Os
|
||||
-D HELTEC_V4_TFT
|
||||
-D I2C_SDA=4
|
||||
-D I2C_SCL=3
|
||||
-D I2C_SDA1=47
|
||||
-D I2C_SCL1=48
|
||||
-D PIN_BUTTON2=35
|
||||
-D PIN_BUZZER=6
|
||||
-D USE_PIN_BUZZER=PIN_BUZZER
|
||||
-D CONFIG_ARDUHAL_LOG_COLORS
|
||||
-D RADIOLIB_DEBUG_SPI=0
|
||||
-D RADIOLIB_DEBUG_PROTOCOL=0
|
||||
-D RADIOLIB_DEBUG_BASIC=0
|
||||
-D RADIOLIB_VERBOSE_ASSERT=0
|
||||
-D RADIOLIB_SPI_PARANOID=0
|
||||
-D CONFIG_DISABLE_HAL_LOCKS=1
|
||||
-D INPUTDRIVER_BUTTON_TYPE=0
|
||||
-D HAS_SCREEN=1
|
||||
-D HAS_TFT=1
|
||||
-D RAM_SIZE=1560
|
||||
-D LV_LVGL_H_INCLUDE_SIMPLE
|
||||
-D LV_CONF_INCLUDE_SIMPLE
|
||||
-D LV_COMP_CONF_INCLUDE_SIMPLE
|
||||
-D LV_USE_SYSMON=0
|
||||
-D LV_USE_PROFILER=0
|
||||
-D LV_USE_PERF_MONITOR=0
|
||||
-D LV_USE_MEM_MONITOR=0
|
||||
-D LV_USE_LOG=0
|
||||
-D LV_BUILD_TEST=0
|
||||
-D USE_LOG_DEBUG
|
||||
-D LOG_DEBUG_INC=\"DebugConfiguration.h\"
|
||||
-D USE_PACKET_API
|
||||
-D LGFX_DRIVER=LGFX_HELTEC_V4_TFT
|
||||
-D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_HELTEC_V4_TFT.h\"
|
||||
-D VIEW_320x240
|
||||
-D MAP_FULL_REDRAW
|
||||
-D DISPLAY_SIZE=320x240 ; landscape mode
|
||||
-D LGFX_PIN_SCK=17
|
||||
-D LGFX_PIN_MOSI=33
|
||||
-D LGFX_PIN_DC=16
|
||||
-D LGFX_PIN_CS=15
|
||||
-D LGFX_PIN_BL=21
|
||||
-D LGFX_PIN_RST=18
|
||||
-D CUSTOM_TOUCH_DRIVER
|
||||
-D TOUCH_SDA_PIN=I2C_SDA1
|
||||
-D TOUCH_SCL_PIN=I2C_SCL1
|
||||
-D TOUCH_INT_PIN=-1 ;45
|
||||
-D TOUCH_RST_PIN=44
|
||||
;base UI
|
||||
-D TFT_CS=LGFX_PIN_CS
|
||||
-D ST7789_CS=TFT_CS
|
||||
-D ST7789_RS=LGFX_PIN_DC
|
||||
-D ST7789_SDA=LGFX_PIN_MOSI
|
||||
-D ST7789_SCK=LGFX_PIN_SCK
|
||||
-D ST7789_RESET=LGFX_PIN_RST
|
||||
-D ST7789_MISO=-1
|
||||
-D ST7789_BUSY=-1
|
||||
-D ST7789_BL=LGFX_PIN_BL
|
||||
-D ST7789_SPI_HOST=SPI3_HOST
|
||||
-D TFT_BL=ST7789_BL
|
||||
-D SPI_FREQUENCY=40000000
|
||||
-D SPI_READ_FREQUENCY=4000000
|
||||
-D TFT_HEIGHT=320
|
||||
-D TFT_WIDTH=240
|
||||
-D TFT_OFFSET_X=0
|
||||
-D TFT_OFFSET_Y=0
|
||||
-D TFT_OFFSET_ROTATION=0
|
||||
-D SCREEN_ROTATE
|
||||
-D SCREEN_TRANSITION_FRAMERATE=5
|
||||
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
|
||||
-D HAS_TOUCHSCREEN=1
|
||||
-D TOUCH_I2C_PORT=0
|
||||
-D TOUCH_SLAVE_ADDRESS=0x2E
|
||||
-D SCREEN_TOUCH_INT=TOUCH_INT_PIN
|
||||
-D SCREEN_TOUCH_RST=TOUCH_RST_PIN
|
||||
|
||||
lib_deps = ${heltec_v4_base.lib_deps}
|
||||
${device-ui_base.lib_deps}
|
||||
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
|
||||
lovyan03/LovyanGFX@1.2.19
|
||||
# renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
|
||||
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
|
||||
@@ -0,0 +1,76 @@
|
||||
#define VEXT_ENABLE 36 // active low, powers the oled display and the lora antenna boost
|
||||
#define BUTTON_PIN 0
|
||||
|
||||
#define ADC_CTRL 37
|
||||
#define ADC_CTRL_ENABLED HIGH
|
||||
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
|
||||
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
|
||||
#define ADC_MULTIPLIER 4.9 * 1.045
|
||||
|
||||
#define USE_SX1262
|
||||
|
||||
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
||||
#define LORA_RESET 12
|
||||
#define LORA_DIO1 14 // SX1262 IRQ
|
||||
#define LORA_DIO2 13 // SX1262 BUSY
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
|
||||
|
||||
#define LORA_SCK 9
|
||||
#define LORA_MISO 11
|
||||
#define LORA_MOSI 10
|
||||
#define LORA_CS 8
|
||||
|
||||
#define SX126X_CS LORA_CS
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
// ---- GC1109 RF FRONT END CONFIGURATION ----
|
||||
// The Heltec V4 uses a GC1109 FEM chip with integrated PA and LNA
|
||||
// RF path: SX1262 -> GC1109 PA -> Pi attenuator -> Antenna
|
||||
// Measured net TX gain (non-linear due to PA compression):
|
||||
// +11dB at 0-15dBm input (e.g., 10dBm in -> 21dBm out)
|
||||
// +10dB at 16-17dBm input
|
||||
// +9dB at 18-19dBm input
|
||||
// +7dB at 21dBm input (e.g., 21dBm in -> 28dBm out max)
|
||||
// Control logic (from GC1109 datasheet):
|
||||
// Shutdown: CSD=0, CTX=X, CPS=X
|
||||
// Receive LNA: CSD=1, CTX=0, CPS=X (17dB gain, 2dB NF)
|
||||
// Transmit bypass: CSD=1, CTX=1, CPS=0 (~1dB loss, no PA)
|
||||
// Transmit PA: CSD=1, CTX=1, CPS=1 (full PA enabled)
|
||||
// Pin mapping:
|
||||
// CTX (pin 6) -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
|
||||
// CSD (pin 4) -> GPIO2: Chip enable (HIGH=on, LOW=shutdown)
|
||||
// CPS (pin 5) -> GPIO46: PA mode select (HIGH=full PA, LOW=bypass)
|
||||
// VCC0/VCC1 -> Vfem via U3 LDO, controlled by GPIO7
|
||||
#define USE_GC1109_PA
|
||||
#define LORA_PA_POWER 7 // VFEM_Ctrl - GC1109 LDO power enable
|
||||
#define LORA_PA_EN 2 // CSD - GC1109 chip enable (HIGH=on)
|
||||
#define LORA_PA_TX_EN 46 // CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
|
||||
|
||||
// GC1109 FEM: TX/RX path switching is handled by DIO2 -> CTX pin (via SX126X_DIO2_AS_RF_SWITCH)
|
||||
// GPIO46 is CPS (PA mode), not TX control - setTransmitEnable() handles it in SX126xInterface.cpp
|
||||
// Do NOT use SX126X_TXEN/RXEN as that would cause double-control of GPIO46
|
||||
|
||||
#if HAS_TFT
|
||||
#define USE_TFTDISPLAY 1
|
||||
#endif
|
||||
/*
|
||||
* GPS pins
|
||||
*/
|
||||
#define GPS_L76K
|
||||
#define PIN_GPS_RESET (42) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
|
||||
#define GPS_RESET_MODE LOW
|
||||
#define PIN_GPS_EN (34)
|
||||
#define GPS_EN_ACTIVE LOW
|
||||
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
|
||||
#define PIN_GPS_STANDBY (40) // An output to wake GPS, low means allow sleep, high means force wake
|
||||
#define PIN_GPS_PPS (41)
|
||||
// Seems to be missing on this new board
|
||||
#define GPS_TX_PIN (38) // This is for bits going TOWARDS the CPU
|
||||
#define GPS_RX_PIN (39) // This is for bits going TOWARDS the GPS
|
||||
#define GPS_THREAD_INTERVAL 50
|
||||
Reference in New Issue
Block a user