Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-03 22:16:00 +08:00
parent 7ae6e9e999
commit 88d56e1e9e
1660 changed files with 281430 additions and 0 deletions
@@ -0,0 +1,21 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x2886
+#define USB_PID 0x0059
+
+// GPIO48 Reference: https://github.com/espressif/arduino-esp32/pull/8600
+
+// The default Wire will be mapped to Screen and Sensors
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+// Default SPI will be mapped to Radio
+static const uint8_t MISO = 39;
+static const uint8_t SCK = 21;
+static const uint8_t MOSI = 38;
+static const uint8_t SS = 17;
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,18 @@
+[env:icarus]
+extends = esp32s3_base
+board = icarus
+board_level = extra
+board_check = true
+board_build.mcu = esp32s3
+board_build.partitions = default_8MB.csv
+upload_protocol = esptool
+upload_speed = 921600
+build_unflags =
+  ${esp32s3_base.build_unflags}
+  -DARDUINO_USB_MODE=1
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -D PRIVATE_HW
+  -I variants/esp32s3/icarus
+  -DBOARD_HAS_PSRAM
+  -DARDUINO_USB_MODE=0
@@ -0,0 +1,31 @@
+// Icarus has a 1.3 inch OLED Screen
+#define SCREEN_SSD106
+
+#define I2C_SDA 8
+#define I2C_SCL 9
+
+#define I2C_SDA1 18
+#define I2C_SCL1 6
+
+#define BUTTON_PIN 7 // Selection button
+
+// RA-01SH/HT-RA62 LORA module
+#define USE_SX1262
+
+#define LORA_MISO 39
+#define LORA_SCK 21
+#define LORA_MOSI 38
+#define LORA_CS 17
+
+#define LORA_RESET 42
+#define LORA_DIO1 5
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+
+//  DIO2 controlls an antenna switch
+#define SX126X_DIO2_AS_RF_SWITCH
+#endif