Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-03 22:16:00 +08:00
parent 7ae6e9e999
commit 88d56e1e9e
1660 changed files with 281430 additions and 0 deletions
@@ -0,0 +1,26 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 18;
+static const uint8_t SCL = 9;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = -1;
+static const uint8_t MOSI = 17;
+static const uint8_t MISO = 6;
+static const uint8_t SCK = 8;
+
+#define SPI_MOSI (39)
+#define SPI_SCK (41)
+#define SPI_MISO (38)
+#define SPI_CS (40)
+
+#define SDCARD_CS SPI_CS
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,31 @@
+[env:mini-epaper-s3]
+;custom_meshtastic_hw_model =
+custom_meshtastic_hw_model_slug = MINI_EPAPER_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO Mini ePaper S3 E-Ink
+custom_meshtastic_images = mini-epaper-s3.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = no
+
+extends = esp32s3_base
+board = mini-epaper-s3
+board_check = true
+upload_protocol = esptool
+
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -I variants/esp32s3/mini-epaper-s3
+  -DMINI_EPAPER_S3
+  -DUSE_EINK
+  -DEINK_DISPLAY_MODEL=GxEPD2_102
+  -DEINK_WIDTH=128
+  -DEINK_HEIGHT=80
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
+  https://github.com/meshtastic/GxEPD2/archive/c7eb4c3c167cf396ef4f541cc5d4c6aa42f3c46b.zip
+  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.4
@@ -0,0 +1,57 @@
+// Display (E-Ink)
+
+#define PIN_EINK_CS 13
+#define PIN_EINK_BUSY 10
+#define PIN_EINK_RES 11
+#define PIN_EINK_SCLK 14
+#define PIN_EINK_MOSI 15
+#define PIN_EINK_DC 12
+#define PIN_EINK_EN 42
+
+#define SPI_INTERFACES_COUNT 2
+#define PIN_SPI1_MISO -1
+#define PIN_SPI1_MOSI PIN_EINK_MOSI
+#define PIN_SPI1_SCK PIN_EINK_SCLK
+#define DISPLAY_FORCE_SMALL_FONTS
+
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+#define BATTERY_PIN 2 // A battery voltage measurement pin, voltage divider connected here to
+// measure battery voltage ratio of voltage divider = 2.0 (assumption)
+#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
+#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
+
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+#define BUTTON_PIN 3
+#define BUTTON_NEED_PULLUP
+#define ALT_BUTTON_PIN 4
+#define ALT_BUTTON_ACTIVE_LOW true
+#define ALT_BUTTON_ACTIVE_PULLUP true
+#define PIN_BUTTON3 0
+
+// #define HAS_SDCARD 1
+// #define SDCARD_USE_SOFT_SPI
+
+// PCF85063 RTC Module
+#define PCF85063_RTC 0x51
+#define HAS_RTC 1
+
+#define USE_SX1262
+#define LORA_DIO1 5
+#define LORA_SCK 8
+#define LORA_MISO 6
+#define LORA_MOSI 17
+#define LORA_CS 7 // CS not connected; IO7 is free
+#define LORA_RESET 21
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY 16
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif