Signed-off-by: 吴文峰 <kevin@lmve.net>
This commit is contained in:
@@ -0,0 +1,59 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define USB_VID 0x303a
|
||||
#define USB_PID 0x1001
|
||||
|
||||
static const uint8_t TX = 43;
|
||||
static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 18;
|
||||
static const uint8_t SCL = 8;
|
||||
|
||||
// Default SPI will be mapped to Radio
|
||||
static const uint8_t SS = 9;
|
||||
static const uint8_t MOSI = 41;
|
||||
static const uint8_t MISO = 38;
|
||||
static const uint8_t SCK = 40;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
static const uint8_t BAT_ADC_PIN = 4;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
@@ -0,0 +1,90 @@
|
||||
; LilyGo T-Deck
|
||||
[env:t-deck]
|
||||
custom_meshtastic_hw_model = 50
|
||||
custom_meshtastic_hw_model_slug = T_DECK
|
||||
custom_meshtastic_architecture = esp32-s3
|
||||
custom_meshtastic_actively_supported = true
|
||||
custom_meshtastic_support_level = 1
|
||||
custom_meshtastic_display_name = LILYGO T-Deck
|
||||
custom_meshtastic_images = t-deck.svg
|
||||
custom_meshtastic_tags = LilyGo
|
||||
custom_meshtastic_requires_dfu = true
|
||||
custom_meshtastic_partition_scheme = 16MB
|
||||
|
||||
extends = esp32s3_base
|
||||
board = t-deck
|
||||
board_check = true
|
||||
board_build.partitions = default_16MB.csv
|
||||
upload_protocol = esptool
|
||||
|
||||
build_src_filter =
|
||||
${esp32s3_base.build_src_filter}
|
||||
+<../variants/esp32s3/t-deck>
|
||||
|
||||
build_flags = ${esp32s3_base.build_flags}
|
||||
-D T_DECK
|
||||
-D BOARD_HAS_PSRAM
|
||||
-I variants/esp32s3/t-deck
|
||||
|
||||
lib_deps = ${esp32s3_base.lib_deps}
|
||||
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
|
||||
lovyan03/LovyanGFX@1.2.19
|
||||
# renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
|
||||
earlephilhower/ESP8266Audio@1.9.9
|
||||
# renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
|
||||
earlephilhower/ESP8266SAM@1.1.0
|
||||
|
||||
[env:t-deck-tft]
|
||||
extends = env:t-deck
|
||||
board_level = pr
|
||||
|
||||
build_flags =
|
||||
${env:t-deck.build_flags}
|
||||
-D CONFIG_DISABLE_HAL_LOCKS=1 ; "feels" to be a bit more stable without locks
|
||||
-D INPUTDRIVER_I2C_KBD_TYPE=0x55
|
||||
-D INPUTDRIVER_ENCODER_TYPE=3
|
||||
-D INPUTDRIVER_ENCODER_LEFT=1
|
||||
-D INPUTDRIVER_ENCODER_RIGHT=2
|
||||
-D INPUTDRIVER_ENCODER_UP=3
|
||||
-D INPUTDRIVER_ENCODER_DOWN=15
|
||||
-D INPUTDRIVER_ENCODER_BTN=0
|
||||
-D INPUTDRIVER_BUTTON_TYPE=0
|
||||
-D HAS_SDCARD
|
||||
-D HAS_SCREEN=1
|
||||
-D HAS_TFT=1
|
||||
-D USE_I2S_BUZZER
|
||||
-D RAM_SIZE=5120
|
||||
-D LV_LVGL_H_INCLUDE_SIMPLE
|
||||
-D LV_CONF_INCLUDE_SIMPLE
|
||||
-D LV_COMP_CONF_INCLUDE_SIMPLE
|
||||
-D LV_USE_SYSMON=0
|
||||
-D LV_USE_PROFILER=0
|
||||
-D LV_USE_PERF_MONITOR=0
|
||||
-D LV_USE_MEM_MONITOR=0
|
||||
-D LV_USE_LOG=0
|
||||
-D USE_LOG_DEBUG
|
||||
-D LOG_DEBUG_INC=\"DebugConfiguration.h\"
|
||||
-D RADIOLIB_DEBUG_BASIC=0
|
||||
-D RADIOLIB_DEBUG_SPI=0
|
||||
-D RADIOLIB_DEBUG_PROTOCOL=0
|
||||
-D RADIOLIB_SPI_PARANOID=0
|
||||
; -D CALIBRATE_TOUCH=0
|
||||
-D LGFX_SCREEN_WIDTH=240
|
||||
-D LGFX_SCREEN_HEIGHT=320
|
||||
-D DISPLAY_SIZE=320x240 ; landscape mode
|
||||
-D LGFX_DRIVER=LGFX_TDECK
|
||||
-D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_T_DECK.h\"
|
||||
; -D LVGL_DRIVER=LVGL_TDECK
|
||||
; -D GFX_DRIVER_INC=\"graphics/LVGL/LVGL_T_DECK.h\"
|
||||
; -D LV_USE_ST7789=1
|
||||
-D VIEW_320x240
|
||||
; -D USE_DOUBLE_BUFFER
|
||||
-D USE_PACKET_API
|
||||
-D MAP_FULL_REDRAW
|
||||
-D CUSTOM_TOUCH_DRIVER
|
||||
|
||||
lib_deps =
|
||||
${env:t-deck.lib_deps}
|
||||
${device-ui_base.lib_deps}
|
||||
# renovate: datasource=github-tags depName=bb_captouch packageName=bitbank2/bb_captouch
|
||||
https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip
|
||||
@@ -0,0 +1,23 @@
|
||||
#include "variant.h"
|
||||
#include "Arduino.h"
|
||||
|
||||
void earlyInitVariant()
|
||||
{
|
||||
// GPIO10 manages all peripheral power supplies
|
||||
// Turn on peripheral power immediately after MUC starts.
|
||||
// If some boards are turned on late, ESP32 will reset due to low voltage.
|
||||
// ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
|
||||
// TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
|
||||
pinMode(KB_POWERON, OUTPUT);
|
||||
digitalWrite(KB_POWERON, HIGH);
|
||||
// T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
|
||||
// We need to initialize all CS pins in advance otherwise there will be SPI communication issues
|
||||
// e.g. when detecting the SD card
|
||||
pinMode(LORA_CS, OUTPUT);
|
||||
digitalWrite(LORA_CS, HIGH);
|
||||
pinMode(SDCARD_CS, OUTPUT);
|
||||
digitalWrite(SDCARD_CS, HIGH);
|
||||
pinMode(TFT_CS, OUTPUT);
|
||||
digitalWrite(TFT_CS, HIGH);
|
||||
delay(100);
|
||||
}
|
||||
@@ -0,0 +1,111 @@
|
||||
|
||||
#define TFT_CS 12
|
||||
|
||||
// ST7789 TFT LCD
|
||||
#define ST7789_CS TFT_CS
|
||||
#define ST7789_RS 11 // DC
|
||||
#define ST7789_SDA 41 // MOSI
|
||||
#define ST7789_SCK 40
|
||||
#define ST7789_RESET -1
|
||||
#define ST7789_MISO 38
|
||||
#define ST7789_BUSY -1
|
||||
#define ST7789_BL 42
|
||||
#define ST7789_SPI_HOST SPI2_HOST
|
||||
#define TFT_BL 42
|
||||
#define SPI_FREQUENCY 40000000
|
||||
#define SPI_READ_FREQUENCY 16000000
|
||||
#define TFT_HEIGHT 320
|
||||
#define TFT_WIDTH 240
|
||||
#define TFT_OFFSET_X 0
|
||||
#define TFT_OFFSET_Y 0
|
||||
#define TFT_OFFSET_ROTATION 0
|
||||
#define SCREEN_ROTATE
|
||||
#define SCREEN_TRANSITION_FRAMERATE 5
|
||||
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
|
||||
#define USE_TFTDISPLAY 1
|
||||
#define HAS_PHYSICAL_KEYBOARD 1
|
||||
|
||||
#define HAS_TOUCHSCREEN 1
|
||||
#define SCREEN_TOUCH_INT 16
|
||||
#define TOUCH_I2C_PORT 0
|
||||
#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
|
||||
|
||||
#define USE_POWERSAVE
|
||||
#define SLEEP_TIME 120
|
||||
|
||||
#define TB_PRESS 0
|
||||
#define BUTTON_ACTIVE_LOW true
|
||||
#define BUTTON_ACTIVE_PULLUP true
|
||||
|
||||
#define GPS_DEFAULT_NOT_PRESENT 1
|
||||
#define GPS_RX_PIN 44
|
||||
#define GPS_TX_PIN 43
|
||||
|
||||
// Have SPI interface SD card slot
|
||||
// #define HAS_SDCARD // --> needs to be in platform.ini for device-ui
|
||||
#define SPI_MOSI (41)
|
||||
#define SPI_SCK (40)
|
||||
#define SPI_MISO (38)
|
||||
#define SPI_CS (39)
|
||||
#define SDCARD_CS SPI_CS
|
||||
#define SD_SPI_FREQUENCY 75000000U
|
||||
|
||||
#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
|
||||
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
|
||||
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
|
||||
|
||||
// keyboard
|
||||
#define I2C_SDA 18 // I2C pins for this board
|
||||
#define I2C_SCL 8
|
||||
#define KB_POWERON 10 // must be set to HIGH
|
||||
#define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
|
||||
#define KB_BL_PIN 46 // not used for now
|
||||
|
||||
// trackball
|
||||
#define HAS_TRACKBALL 1
|
||||
#define TB_UP 3
|
||||
#define TB_DOWN 15
|
||||
#define TB_LEFT 1
|
||||
#define TB_RIGHT 2
|
||||
#define TB_PRESS 0 // BUTTON_PIN
|
||||
#define TB_DIRECTION FALLING
|
||||
#define TB_THRESHOLD 3
|
||||
|
||||
// microphone
|
||||
#define ES7210_SCK 47
|
||||
#define ES7210_DIN 14
|
||||
#define ES7210_LRCK 21
|
||||
#define ES7210_MCLK 48
|
||||
|
||||
// dac / amp
|
||||
#define HAS_I2S
|
||||
#define DAC_I2S_BCK 7
|
||||
#define DAC_I2S_WS 5
|
||||
#define DAC_I2S_DOUT 6
|
||||
#define DAC_I2S_MCLK 21 // GPIO lrck mic
|
||||
|
||||
// LoRa
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
|
||||
#define LORA_SCK 40
|
||||
#define LORA_MISO 38
|
||||
#define LORA_MOSI 41
|
||||
#define LORA_CS 9
|
||||
|
||||
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
||||
#define LORA_RESET 17
|
||||
#define LORA_DIO1 45 // SX1262 IRQ
|
||||
#define LORA_DIO2 13 // SX1262 BUSY
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
||||
|
||||
#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
// Not really an E22 but TTGO seems to be trying to clone that
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
|
||||
// code)
|
||||
Reference in New Issue
Block a user