Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-03 22:16:00 +08:00
parent 7ae6e9e999
commit 88d56e1e9e
1660 changed files with 281430 additions and 0 deletions
@@ -0,0 +1,15 @@
+[env:ME25LS01-4Y10TD]
+extends = nrf52840_base
+board = me25ls01-4y10td
+board_level = extra
+; platform = https://github.com/maxgerhardt/platform-nordicnrf52#cac6fcf943a41accd2aeb4f3659ae297a73f422e
+build_flags = ${nrf52840_base.build_flags}
+  -Ivariants/nrf52840/ME25LS01-4Y10TD
+  -Isrc/platform/nrf52/softdevice
+  -Isrc/platform/nrf52/softdevice/nrf52
+  -DME25LS01_4Y10TD
+board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD>
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+upload_protocol = nrfutil
+;upload_port = /dev/ttyACM1
@@ -0,0 +1,15 @@
+#include "RadioLib.h"
+#include "nrf.h"
+
+// set RF switch configuration for Wio WM1110
+// Wio WM1110 uses DIO5 and DIO6 for RF switching
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6
+    {LR11x0::MODE_STBY, {LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW}},
+    {LR11x0::MODE_TX, {HIGH, HIGH}},  {LR11x0::MODE_TX_HP, {LOW, HIGH}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
+    {LR11x0::MODE_WIFI, {LOW, LOW}},  END_OF_MODE_TABLE,
+};
@@ -0,0 +1,37 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, HIGH);
+}
@@ -0,0 +1,137 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ME25LS01_4Y10TD_
+#define _VARIANT_ME25LS01_4Y10TD_
+
+#define ME25LS01
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// Use the native nrf52 usb power detection
+#define NRF_APM
+
+#define PIN_3V3_EN (32 + 5) //-1
+#define PIN_3V3_ACC_EN -1
+
+#define PIN_LED1 (32 + 7) // P1.07 Blue D2
+
+#define LED_POWER PIN_LED1
+
+#define LED_BLUE -1
+#define LED_STATE_ON 1 // State when LED is lit
+
+#define BUTTON_PIN (0 + 27) // P0.27 K3
+#define BUTTON_NEED_PULLUP
+
+#define HAS_WIRE 1
+
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (0 + 15) // P0.15
+#define PIN_WIRE_SCL (0 + 17) // P0.17
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (0 + 14) // P0.14
+#define PIN_SERIAL1_TX (0 + 13) // P0.13
+
+#define PIN_SERIAL2_RX (0 + 17) // P0.17
+#define PIN_SERIAL2_TX (0 + 16) // P0.16
+
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (0 + 29) // P0.20 // MISO
+#define PIN_SPI_MOSI (0 + 2)  // P0.02 // MOSI
+#define PIN_SPI_SCK (32 + 15) // P1.15 // SCK
+#define PIN_SPI_NSS (32 + 13) // P1.13 // NSS
+
+#define LORA_RESET (32 + 11) // P1.11 // RST
+#define LORA_DIO1 (32 + 12)  // P1.12 // IRQ
+#define LORA_DIO2 (32 + 10)  // P1.10 // BUSY
+#define LORA_SCK PIN_SPI_SCK
+#define LORA_MISO PIN_SPI_MISO
+#define LORA_MOSI PIN_SPI_MOSI
+#define LORA_CS PIN_SPI_NSS
+
+// supported modules list
+#define USE_LR1110
+
+#define LR1110_IRQ_PIN LORA_DIO1
+#define LR1110_NRESET_PIN LORA_RESET
+#define LR1110_BUSY_PIN LORA_DIO2
+#define LR1110_SPI_NSS_PIN LORA_CS
+#define LR1110_SPI_SCK_PIN LORA_SCK
+#define LR1110_SPI_MOSI_PIN LORA_MOSI
+#define LR1110_SPI_MISO_PIN LORA_MISO
+
+#define LR11X0_DIO3_TCXO_VOLTAGE 1.6
+#define LR11X0_DIO_AS_RF_SWITCH
+
+#define HAS_GPS 0
+
+#define PIN_GPS_EN -1
+#define GPS_EN_ACTIVE HIGH
+#define PIN_GPS_RESET -1
+#define GPS_VRTC_EN -1
+#define GPS_SLEEP_INT -1
+#define GPS_RTC_INT -1
+#define GPS_RESETB_OUT -1
+
+#define BATTERY_PIN -1
+#define ADC_MULTIPLIER (2.0F)
+
+#define ADC_RESOLUTION 14
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+
+// Buzzer
+#define PIN_BUZZER (0 + 25)
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif // _VARIANT_ME25LS01_4Y10TD_