Signed-off-by: 吴文峰 <kevin@lmve.net>
This commit is contained in:
@@ -0,0 +1,24 @@
|
||||
; First prototype eink/nrf52840/sx1262 device
|
||||
[env:nano-g2-ultra]
|
||||
custom_meshtastic_hw_model = 18
|
||||
custom_meshtastic_hw_model_slug = NANO_G2_ULTRA
|
||||
custom_meshtastic_architecture = nrf52840
|
||||
custom_meshtastic_actively_supported = true
|
||||
custom_meshtastic_support_level = 2
|
||||
custom_meshtastic_display_name = Nano G2 Ultra
|
||||
custom_meshtastic_images = nano-g2-ultra.svg
|
||||
custom_meshtastic_tags = B&Q
|
||||
|
||||
extends = nrf52840_base
|
||||
board = nano-g2-ultra
|
||||
debug_tool = jlink
|
||||
|
||||
build_flags = ${nrf52840_base.build_flags}
|
||||
-I variants/nrf52840/nano-g2-ultra
|
||||
-D NANO_G2_ULTRA
|
||||
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2-ultra>
|
||||
lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
# renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
|
||||
lewisxhe/SensorLib@0.3.4
|
||||
;upload_protocol = fs
|
||||
@@ -0,0 +1,36 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
|
||||
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
|
||||
|
||||
// P1
|
||||
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// Nothing need to be inited for now
|
||||
}
|
||||
@@ -0,0 +1,171 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_Nano_G2_
|
||||
#define _VARIANT_Nano_G2_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// #define USE_LFRC // Board uses 32khz RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (1)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
#define LED_STATE_ON 0 // State when LED is lit
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
#define PIN_BUTTON1 (32 + 6)
|
||||
|
||||
#define EXT_NOTIFY_OUT (0 + 4) // Default pin to use for Ext Notify Module.
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A4 (0 + 2) // Battery ADC
|
||||
|
||||
#define BATTERY_PIN PIN_A4
|
||||
|
||||
static const uint8_t A4 = PIN_A4;
|
||||
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
#define PIN_SERIAL2_RX (0 + 22)
|
||||
#define PIN_SERIAL2_TX (0 + 20)
|
||||
|
||||
/**
|
||||
Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (0 + 17)
|
||||
#define PIN_WIRE_SCL (0 + 15)
|
||||
|
||||
/*
|
||||
External serial flash W25Q16JV_IQ
|
||||
*/
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK (0 + 8)
|
||||
#define PIN_QSPI_CS (32 + 7)
|
||||
#define PIN_QSPI_IO0 (0 + 6) // MOSI if using two bit interface
|
||||
#define PIN_QSPI_IO1 (0 + 26) // MISO if using two bit interface
|
||||
#define PIN_QSPI_IO2 (32 + 4) // WP if using two bit interface (i.e. not used)
|
||||
#define PIN_QSPI_IO3 (32 + 2) // HOLD if using two bit interface (i.e. not used)
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES W25Q16JV_IQ
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
/*
|
||||
* Lora radio
|
||||
*/
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS (32 + 13) // FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 (32 + 10)
|
||||
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
|
||||
// #define SX1262_DIO3 (0 + 21)
|
||||
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the main CPU?
|
||||
#define SX126X_BUSY (32 + 11)
|
||||
#define SX126X_RESET (32 + 15)
|
||||
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
// #define LORA_DISABLE_SENDING // Define this to disable transmission for testing (power testing etc...)
|
||||
|
||||
// #undef SX126X_CS
|
||||
|
||||
/*
|
||||
* GPS pins
|
||||
*/
|
||||
|
||||
#define GPS_L76K
|
||||
|
||||
#define PIN_GPS_STANDBY (0 + 13) // An output to wake GPS, low means allow sleep, high means force wake STANDBY
|
||||
#define GPS_TX_PIN (0 + 10) // This is for bits going FROM the CPU
|
||||
#define GPS_RX_PIN (0 + 9) // This is for bits going FROM the GPS
|
||||
|
||||
// #define GPS_THREAD_INTERVAL 50
|
||||
|
||||
#define PIN_SERIAL1_TX GPS_TX_PIN
|
||||
#define PIN_SERIAL1_RX GPS_RX_PIN
|
||||
|
||||
// PCF8563 RTC Module
|
||||
#define PIN_RTC_INT (0 + 14) // Interrupt from the PCF8563 RTC
|
||||
#define PCF8563_RTC 0x51
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
// For LORA, spi 0
|
||||
#define PIN_SPI_MISO (32 + 9)
|
||||
#define PIN_SPI_MOSI (0 + 11)
|
||||
#define PIN_SPI_SCK (0 + 12)
|
||||
|
||||
// To debug via the segger JLINK console rather than the CDC-ACM serial device
|
||||
// #define USE_SEGGER
|
||||
|
||||
// Battery
|
||||
// The battery sense is hooked to pin A0 (2)
|
||||
// it is defined in the anlaolgue pin section of this file
|
||||
// and has 12 bit resolution
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
#undef AREF_VOLTAGE
|
||||
#define AREF_VOLTAGE 3.0
|
||||
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
||||
#define ADC_MULTIPLIER (2.0F)
|
||||
|
||||
/**
|
||||
OLED Screen Model
|
||||
*/
|
||||
#define ARDUINO_ARCH_AVR
|
||||
#define USE_SH1107_128_64
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user