Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-03 22:16:00 +08:00
parent 7ae6e9e999
commit 88d56e1e9e
1660 changed files with 281430 additions and 0 deletions
@@ -0,0 +1,118 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_WIO_SDK_WM1110_
+#define _VARIANT_WIO_SDK_WM1110_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef USE_TINYUSB
+#error TinyUSB must be disabled by platformio before using this variant
+#endif
+
+// We use the hardware serial port for the serial console
+#define Serial Serial1
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (6)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_3V3_EN (0 + 7) // P0.7, Power to Sensors
+
+#define PIN_WIRE_SDA (0 + 27) // P0.27
+#define PIN_WIRE_SCL (0 + 26) // P0.26
+
+#define PIN_LED1 (0 + 13) // P0.13
+#define PIN_LED2 (0 + 14) // P0.14
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2 // Actually red
+
+#define LED_STATE_ON 1 // State when LED is lit
+
+#define BUTTON_PIN (0 + 23) // P0.23
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX (0 + 22) // P0.22
+#define PIN_SERIAL1_TX (0 + 24) // P0.24
+
+#define PIN_SERIAL2_RX (0 + 6) // P0.06
+#define PIN_SERIAL2_TX (0 + 8) // P0.08
+
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (32 + 15) // P1.15 47
+#define PIN_SPI_MOSI (32 + 14) // P1.14 46
+#define PIN_SPI_SCK (32 + 13)  // P1.13 45
+#define PIN_SPI_NSS (32 + 12)  // P1.12 44
+
+#define LORA_RESET (32 + 10) // P1.10 42 // RST
+#define LORA_DIO1 (32 + 8)   // P1.08 40 // IRQ
+#define LORA_DIO2 (32 + 11)  // P1.11 43 // BUSY
+#define LORA_SCK PIN_SPI_SCK
+#define LORA_MISO PIN_SPI_MISO
+#define LORA_MOSI PIN_SPI_MOSI
+#define LORA_CS PIN_SPI_NSS
+
+// supported modules list
+#define USE_LR1110
+
+#define LR1110_IRQ_PIN LORA_DIO1
+#define LR1110_NRESET_PIN LORA_RESET
+#define LR1110_BUSY_PIN LORA_DIO2
+#define LR1110_SPI_NSS_PIN LORA_CS
+#define LR1110_SPI_SCK_PIN LORA_SCK
+#define LR1110_SPI_MOSI_PIN LORA_MOSI
+#define LR1110_SPI_MISO_PIN LORA_MISO
+
+#define LR11X0_DIO3_TCXO_VOLTAGE 1.6
+#define LR11X0_DIO_AS_RF_SWITCH
+
+#define LR1110_GNSS_ANT_PIN (32 + 5) // P1.05 37
+
+#define NRF_USE_SERIAL_DFU
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif // _VARIANT_WIO_SDK_WM1110_