Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-03 22:16:00 +08:00
parent 7ae6e9e999
commit 88d56e1e9e
1660 changed files with 281430 additions and 0 deletions
@@ -0,0 +1,32 @@
+[env:picow]
+custom_meshtastic_hw_model = 47
+custom_meshtastic_hw_model_slug = RPI_PICO
+custom_meshtastic_architecture = rp2040
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Raspberry Pi Pico W
+custom_meshtastic_images = rpipicow.svg
+custom_meshtastic_tags = RPi, DIY
+custom_meshtastic_requires_dfu = true
+
+extends = rp2040_base
+board = rpipicow
+board_level = pr
+board_check = true
+upload_protocol = picotool
+# add our variants files to the include and src paths
+build_flags = 
+  ${rp2040_base.build_flags}
+  -D RPI_PICO
+  -I variants/rp2040/rpipicow
+  -D HW_SPI1_DEVICE
+  -D HAS_UDP_MULTICAST=1
+  -fexceptions  # for exception handling in MQTT
+  -ULED_BUILTIN
+build_src_filter = ${rp2040_base.build_src_filter} +<mesh/wifi/>
+lib_deps =
+  ${rp2040_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
+debug_build_flags = ${rp2040_base.build_flags}, -g
+debug_tool = cmsis-dap ; for e.g. Picotool
@@ -0,0 +1,54 @@
+// #define RADIOLIB_CUSTOM_ARDUINO 1
+// #define RADIOLIB_TONE_UNSUPPORTED 1
+// #define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED 1
+
+#define ARDUINO_ARCH_AVR
+
+#ifndef HAS_WIFI
+#define HAS_WIFI 1
+#endif
+
+// default I2C pins:
+// SDA = 4
+// SCL = 5
+
+// Recommended pins for SerialModule:
+// txd = 8
+// rxd = 9
+
+#define EXT_NOTIFY_OUT 22
+#define BUTTON_PIN 17
+
+#define LED_POWER PIN_LED
+
+#define BATTERY_PIN 26
+// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
+#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
+
+#define USE_SX1262
+
+#undef LORA_SCK
+#undef LORA_MISO
+#undef LORA_MOSI
+#undef LORA_CS
+
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 3
+
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 15
+#define LORA_DIO1 20
+#define LORA_DIO2 2
+#define LORA_DIO3 RADIOLIB_NC
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif