Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-03 22:16:00 +08:00
parent 7ae6e9e999
commit 88d56e1e9e
1660 changed files with 281430 additions and 0 deletions
@@ -0,0 +1,32 @@
+; Common settings for rp2350 Processor based targets
+[rp2350_base]
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#cc24cfef37ed22ca9f2a6aead28c2deb76c39f24
+  ; For arduino-pico >= 5.4.4
+extends = arduino_base
+platform_packages =
+  # TODO renovate
+  arduino-pico@https://github.com/earlephilhower/arduino-pico/releases/download/5.4.4/rp2040-5.4.4.zip
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
+  -Isrc/platform/rp2xx0
+  -D__PLAT_RP2350__
+  -D__FREERTOS=1
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
+
+lib_ignore =
+  BluetoothOTA
+  lvgl
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
@@ -0,0 +1,15 @@
+[env:pico2]
+extends = rp2350_base
+board = rpipico2
+board_level = pr
+upload_protocol = picotool
+
+# add our variants files to the include and src paths
+build_flags =
+  ${rp2350_base.build_flags}
+  -D RPI_PICO2
+  -I variants/rp2350/rpipico2
+  -D DEBUG_RP2040_PORT=Serial
+  -D HW_SPI1_DEVICE
+debug_build_flags = ${rp2350_base.build_flags}, -g
+debug_tool = cmsis-dap ; for e.g. Picotool
@@ -0,0 +1,50 @@
+// #define RADIOLIB_CUSTOM_ARDUINO 1
+// #define RADIOLIB_TONE_UNSUPPORTED 1
+// #define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED 1
+
+#define ARDUINO_ARCH_AVR
+
+// default I2C pins:
+// SDA = 4
+// SCL = 5
+
+// Recommended pins for SerialModule:
+// txd = 8
+// rxd = 9
+
+#define EXT_NOTIFY_OUT 22
+#define BUTTON_PIN 17
+
+#define LED_POWER PIN_LED
+
+#define BATTERY_PIN 26
+// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
+#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
+
+#define USE_SX1262
+
+#undef LORA_SCK
+#undef LORA_MISO
+#undef LORA_MOSI
+#undef LORA_CS
+
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 3
+
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 15
+#define LORA_DIO1 20
+#define LORA_DIO2 2
+#define LORA_DIO3 RADIOLIB_NC
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
@@ -0,0 +1,34 @@
+[env:pico2w]
+extends = rp2350_base
+board = rpipico2w
+board_level = pr
+board_check = true
+upload_protocol = jlink
+# debug settings for external openocd with RP2040 support (custom build)
+debug_tool = custom
+debug_init_cmds =
+  target extended-remote localhost:3333
+  $INIT_BREAK
+  monitor reset halt
+  $LOAD_CMDS
+  monitor init
+  monitor reset halt
+
+# add our variants files to the include and src paths
+build_flags =
+  ${rp2350_base.build_flags}
+  -DRPI_PICO2
+  -Ivariants/rp2350/rpipico2w
+#  -DDEBUG_RP2040_PORT=Serial
+  -DHW_SPI1_DEVICE
+  -DARDUINO_RASPBERRY_PI_PICO_2W
+  -DARDUINO_ARCH_RP2040
+  -DHAS_WIFI=1
+  -fexceptions  # for exception handling in MQTT
+  -DHAS_UDP_MULTICAST=1
+build_src_filter = ${rp2350_base.build_src_filter} +<mesh/wifi/>
+lib_deps =
+  ${rp2350_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
+debug_build_flags = ${rp2350_base.build_flags}, -g
@@ -0,0 +1,52 @@
+// #define RADIOLIB_CUSTOM_ARDUINO 1
+// #define RADIOLIB_TONE_UNSUPPORTED 1
+// #define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED 1
+
+#define ARDUINO_ARCH_AVR
+
+#ifndef HAS_WIFI
+#define HAS_WIFI 1
+#endif
+
+// default I2C pins:
+// SDA = 4
+// SCL = 5
+
+// Recommended pins for SerialModule:
+// txd = 8
+// rxd = 9
+
+#define EXT_NOTIFY_OUT 22
+#define BUTTON_PIN 17
+
+#define BATTERY_PIN 26
+// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
+#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
+
+#define USE_SX1262
+
+#undef LORA_SCK
+#undef LORA_MISO
+#undef LORA_MOSI
+#undef LORA_CS
+
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 3
+
+#define LORA_DIO0 RADIOLIB_NC
+#define LORA_RESET 15
+#define LORA_DIO1 20
+#define LORA_DIO2 2
+#define LORA_DIO3 RADIOLIB_NC
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif