Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-06-08 15:43:08 +08:00
parent 39074ae258
commit 8a181c7a8e
9 changed files with 1 additions and 220 deletions
@@ -1,24 +0,0 @@
 #ifndef Pins_Arduino_h
 #define Pins_Arduino_h
 #include <stdint.h>
 static const uint8_t TX = 21;
 static const uint8_t RX = 20;
 static const uint8_t SDA = 1;
 static const uint8_t SCL = 0;
 static const uint8_t SS = 8;
 static const uint8_t MOSI = 7;
 static const uint8_t MISO = 6;
 static const uint8_t SCK = 10;
 static const uint8_t A0 = 0;
 static const uint8_t A1 = 1;
 static const uint8_t A2 = 2;
 static const uint8_t A3 = 3;
 static const uint8_t A4 = 4;
 static const uint8_t A5 = 5;
 #endif /* Pins_Arduino_h */
@@ -1,27 +0,0 @@
 ; ESP32 C3 Super Mini Development Board
 ; https://www.espboards.dev/esp32/esp32-c3-super-mini/
 [env:esp32c3_moonshine]
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/diy/esp32c3_moonshine
 monitor_speed = 115200
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 921600
 ; ------------------- Flash 核心配置 -------------------
 ; 1. Flash 容量（根据硬件实际值改，常见 4MB/8MB）
 board_build.flash_size = 4MB
 ; 2. Flash 模式（ESP32-C3 推荐 dio）
 board_build.flash_mode = dio
 ; 3. Flash 时钟频率（ESP32-C3 推荐 80MHz）
 board_build.flash_freq = 80MHz
 ; （可选）上传时的 Flash 配置（和上面保持一致即可）
 board_upload.flash_size = 4MB
@@ -1,51 +0,0 @@
 #define BUTTON_PIN 9
 // LED pin on HT-DEV-ESP_V2 and HT-DEV-ESP_V3
 // https://resource.heltec.cn/download/HT-CT62/HT-CT62_Reference_Design.pdf
 // https://resource.heltec.cn/download/HT-DEV-ESP/HT-DEV-ESP_V3_Sch.pdf
 #define LED_POWER 12    // LED
 #define LED_STATE_ON 1 // State when LED is lit
 #define HAS_SCREEN 0
 #define HAS_GPS 0
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
 #define E220_400M30S
 //#define E220_400M33S
 #ifdef E220_400M30S
 #define SETTING_MAX_POWER 30
 #define TX_GAIN_LORA 8
 #define SX126X_MAX_POWER 22
 #endif
 #ifdef E220_400M33S
 #define SETTING_MAX_POWER 33
 #define TX_GAIN_LORA 25
 #define SX126X_MAX_POWER 8
 #endif
 #define USE_LLCC68
 #define USE_SX1262
 #define USE_SX1268
 #define LORA_SCK 10
 #define LORA_MISO 6
 #define LORA_MOSI 7
 #define LORA_CS 8
 #define LORA_DIO0 RADIOLIB_NC
 #define LORA_RESET 5
 #define LORA_DIO1 3
 #define LORA_DIO2 RADIOLIB_NC
 #define LORA_BUSY 4
 #define SX126X_CS LORA_CS
 #define SX126X_DIO1 LORA_DIO1
 #define SX126X_BUSY LORA_BUSY
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #define TCXO_OPTIONAL
@@ -1,24 +0,0 @@
 #ifndef Pins_Arduino_h
 #define Pins_Arduino_h
 #include <stdint.h>
 static const uint8_t TX = 21;
 static const uint8_t RX = 20;
 static const uint8_t SDA = 1;
 static const uint8_t SCL = 0;
 static const uint8_t SS = 8;
 static const uint8_t MOSI = 7;
 static const uint8_t MISO = 6;
 static const uint8_t SCK = 10;
 static const uint8_t A0 = 0;
 static const uint8_t A1 = 1;
 static const uint8_t A2 = 2;
 static const uint8_t A3 = 3;
 static const uint8_t A4 = 4;
 static const uint8_t A5 = 5;
 #endif /* Pins_Arduino_h */
@@ -1,29 +0,0 @@
 ; ESP32 C3 Super Mini Development Board
 ; https://www.espboards.dev/esp32/esp32-c3-super-mini/
 [env:esp32c3_moonshine_mv]
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/diy/esp32c3_moonshine_mv
  -D ARDUINO_USB_MODE=1
  -D ARDUINO_USB_CDC_ON_BOOT=1
 monitor_speed = 115200
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 921600
 ; ------------------- Flash 核心配置 -------------------
 ; 1. Flash 容量（根据硬件实际值改，常见 4MB/8MB）
 board_build.flash_size = 4MB
 ; 2. Flash 模式（ESP32-C3 推荐 dio）
 board_build.flash_mode = dio
 ; 3. Flash 时钟频率（ESP32-C3 推荐 80MHz）
 board_build.flash_freq = 80MHz
 ; （可选）上传时的 Flash 配置（和上面保持一致即可）
 board_upload.flash_size = 4MB
@@ -1,64 +0,0 @@
 #define BUTTON_PIN 9
 // LED pin on HT-DEV-ESP_V2 and HT-DEV-ESP_V3
 // https://resource.heltec.cn/download/HT-CT62/HT-CT62_Reference_Design.pdf
 // https://resource.heltec.cn/download/HT-DEV-ESP/HT-DEV-ESP_V3_Sch.pdf
 #define LED_POWER 13    // LED
 #define LED_STATE_ON 1 // State when LED is lit
 #define HAS_SCREEN 1
 #define USE_SSD1306
 #define HAS_I2C 1
 #define WIRE_INTERFACES_COUNT (1)
 #define I2C_SDA 0
 #define I2C_SCL 1
 #define HAS_GPS 1
 #define GPS_RX_PIN 21
 #define GPS_TX_PIN 20
 #define GPS_POWER_TOGGLE 1
 #define PIN_GPS_EN 12
 #define BATTERY_PIN            2
 #define ADC_CHANNEL            ADC1_GPIO2_CHANNEL
 #define ADC_MULTIPLIER         2.0f
 #define HAS_NEOPIXEL 1
 #define NEOPIXEL_DATA 13
 #define NEOPIXEL_COUNT 1 // How many neopixels are connected
 #define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800)
 #define RA_01SC_P
 #ifdef RA_01SC_P
 #define SETTING_MAX_POWER 29
 #define TX_GAIN_LORA 26
 #define SX126X_MAX_POWER 3
 #endif
 #define USE_LLCC68
 #define USE_SX1262
 #define USE_SX1268
 #define LORA_SCK 10
 #define LORA_MISO 6
 #define LORA_MOSI 7
 #define LORA_CS 8
 #define LORA_DIO0 RADIOLIB_NC
 #define LORA_RESET 5
 #define LORA_DIO1 3
 #define LORA_DIO2 RADIOLIB_NC
 #define LORA_BUSY 4
 #define SX126X_CS LORA_CS
 #define SX126X_DIO1 LORA_DIO1
 #define SX126X_BUSY LORA_BUSY
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #define TCXO_OPTIONAL