kevin/lora_meshtastic_project
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Signed-off-by: 吴文峰 <kevin@lmve.net>

Browse Source
This commit is contained in:
kevin
2026-06-08 15:43:08 +08:00
parent 39074ae258
commit 8a181c7a8e
9 changed files with 1 additions and 220 deletions
Download Patch File Download Diff File Expand all files Collapse all files
PCB/Moonshine_travelers.eprj2
BIN
View File
Binary file not shown.
code/esp32c3_moonshine/pins_arduino.h
-24
View File
@@ -1,24 +0,0 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
static const uint8_t TX = 21;
static const uint8_t RX = 20;
static const uint8_t SDA = 1;
static const uint8_t SCL = 0;
static const uint8_t SS = 8;
static const uint8_t MOSI = 7;
static const uint8_t MISO = 6;
static const uint8_t SCK = 10;
static const uint8_t A0 = 0;
static const uint8_t A1 = 1;
static const uint8_t A2 = 2;
static const uint8_t A3 = 3;
static const uint8_t A4 = 4;
static const uint8_t A5 = 5;
#endif /* Pins_Arduino_h */
code/esp32c3_moonshine/platformio.ini
-27
View File
@@ -1,27 +0,0 @@
; ESP32 C3 Super Mini Development Board
; https://www.espboards.dev/esp32/esp32-c3-super-mini/
[env:esp32c3_moonshine]
extends = esp32c3_base
board = esp32-c3-devkitm-1
board_level = pr
build_flags =
${esp32c3_base.build_flags}
-D PRIVATE_HW
-I variants/esp32c3/diy/esp32c3_moonshine
monitor_speed = 115200
upload_protocol = esptool
;upload_port = /dev/ttyUSB0
upload_speed = 921600
; ------------------- Flash 核心配置 -------------------
; 1. Flash 容量（根据硬件实际值改，常见 4MB/8MB）
board_build.flash_size = 4MB
; 2. Flash 模式（ESP32-C3 推荐 dio）
board_build.flash_mode = dio
; 3. Flash 时钟频率（ESP32-C3 推荐 80MHz）
board_build.flash_freq = 80MHz
; （可选）上传时的 Flash 配置（和上面保持一致即可）
board_upload.flash_size = 4MB
code/esp32c3_moonshine/variant.h
-51
View File
@@ -1,51 +0,0 @@
#define BUTTON_PIN 9
// LED pin on HT-DEV-ESP_V2 and HT-DEV-ESP_V3
// https://resource.heltec.cn/download/HT-CT62/HT-CT62_Reference_Design.pdf
// https://resource.heltec.cn/download/HT-DEV-ESP/HT-DEV-ESP_V3_Sch.pdf
#define LED_POWER 12 // LED
#define LED_STATE_ON 1 // State when LED is lit
#define HAS_SCREEN 0
#define HAS_GPS 0
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define E220_400M30S
//#define E220_400M33S
#ifdef E220_400M30S
#define SETTING_MAX_POWER 30
#define TX_GAIN_LORA 8
#define SX126X_MAX_POWER 22
#endif
#ifdef E220_400M33S
#define SETTING_MAX_POWER 33
#define TX_GAIN_LORA 25
#define SX126X_MAX_POWER 8
#endif
#define USE_LLCC68
#define USE_SX1262
#define USE_SX1268
#define LORA_SCK 10
#define LORA_MISO 6
#define LORA_MOSI 7
#define LORA_CS 8
#define LORA_DIO0 RADIOLIB_NC
#define LORA_RESET 5
#define LORA_DIO1 3
#define LORA_DIO2 RADIOLIB_NC
#define LORA_BUSY 4
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_BUSY
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define TCXO_OPTIONAL
code/esp32c3_moonshine_mv/pins_arduino.h
-24
View File
@@ -1,24 +0,0 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
static const uint8_t TX = 21;
static const uint8_t RX = 20;
static const uint8_t SDA = 1;
static const uint8_t SCL = 0;
static const uint8_t SS = 8;
static const uint8_t MOSI = 7;
static const uint8_t MISO = 6;
static const uint8_t SCK = 10;
static const uint8_t A0 = 0;
static const uint8_t A1 = 1;
static const uint8_t A2 = 2;
static const uint8_t A3 = 3;
static const uint8_t A4 = 4;
static const uint8_t A5 = 5;
#endif /* Pins_Arduino_h */
code/esp32c3_moonshine_mv/platformio.ini
-29
View File
@@ -1,29 +0,0 @@
; ESP32 C3 Super Mini Development Board
; https://www.espboards.dev/esp32/esp32-c3-super-mini/
[env:esp32c3_moonshine_mv]
extends = esp32c3_base
board = esp32-c3-devkitm-1
board_level = pr
build_flags =
${esp32c3_base.build_flags}
-D PRIVATE_HW
-I variants/esp32c3/diy/esp32c3_moonshine_mv
-D ARDUINO_USB_MODE=1
-D ARDUINO_USB_CDC_ON_BOOT=1
monitor_speed = 115200
upload_protocol = esptool
;upload_port = /dev/ttyUSB0
upload_speed = 921600
; ------------------- Flash 核心配置 -------------------
; 1. Flash 容量（根据硬件实际值改，常见 4MB/8MB）
board_build.flash_size = 4MB
; 2. Flash 模式（ESP32-C3 推荐 dio）
board_build.flash_mode = dio
; 3. Flash 时钟频率（ESP32-C3 推荐 80MHz）
board_build.flash_freq = 80MHz
; （可选）上传时的 Flash 配置（和上面保持一致即可）
board_upload.flash_size = 4MB
code/esp32c3_moonshine_mv/variant.h
-64
View File
@@ -1,64 +0,0 @@
#define BUTTON_PIN 9
// LED pin on HT-DEV-ESP_V2 and HT-DEV-ESP_V3
// https://resource.heltec.cn/download/HT-CT62/HT-CT62_Reference_Design.pdf
// https://resource.heltec.cn/download/HT-DEV-ESP/HT-DEV-ESP_V3_Sch.pdf
#define LED_POWER 13 // LED
#define LED_STATE_ON 1 // State when LED is lit
#define HAS_SCREEN 1
#define USE_SSD1306
#define HAS_I2C 1
#define WIRE_INTERFACES_COUNT (1)
#define I2C_SDA 0
#define I2C_SCL 1
#define HAS_GPS 1
#define GPS_RX_PIN 21
#define GPS_TX_PIN 20
#define GPS_POWER_TOGGLE 1
#define PIN_GPS_EN 12
#define BATTERY_PIN 2
#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
#define ADC_MULTIPLIER 2.0f
#define HAS_NEOPIXEL 1
#define NEOPIXEL_DATA 13
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800)
#define RA_01SC_P
#ifdef RA_01SC_P
#define SETTING_MAX_POWER 29
#define TX_GAIN_LORA 26
#define SX126X_MAX_POWER 3
#endif
#define USE_LLCC68
#define USE_SX1262
#define USE_SX1268
#define LORA_SCK 10
#define LORA_MISO 6
#define LORA_MOSI 7
#define LORA_CS 8
#define LORA_DIO0 RADIOLIB_NC
#define LORA_RESET 5
#define LORA_DIO1 3
#define LORA_DIO2 RADIOLIB_NC
#define LORA_BUSY 4
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_BUSY
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define TCXO_OPTIONAL
code/firmware
Submodule
+1
Submodule code/firmware added at 8c4900a52f
code/meshtastic_firmware
-1
Submodule code/meshtastic_firmware deleted from db694f2f24