Signed-off-by: 吴文峰 <kevin@lmve.net>
This commit is contained in:
-12
@@ -1,12 +0,0 @@
|
||||
; 9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S
|
||||
; https://shopee.com.my/product/1095224/21692283917
|
||||
[env:9m2ibr_aprs_lora_tracker]
|
||||
extends = esp32_base
|
||||
board = esp32doit-devkit-v1
|
||||
board_level = extra
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-D PRIVATE_HW
|
||||
-D EBYTE_E22
|
||||
-D EBYTE_E22_900M30S ; Assume Tx power curve is identical to 900M30S as there is no documentation
|
||||
-I variants/esp32/diy/9m2ibr_aprs_lora_tracker
|
||||
@@ -1,74 +0,0 @@
|
||||
/*
|
||||
|
||||
9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S
|
||||
https://shopee.com.my/product/1095224/21692283917
|
||||
|
||||
Originally developed for LoRa_APRS_iGate and GPIO is similar to
|
||||
https://github.com/richonguzman/LoRa_APRS_iGate/blob/main/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h
|
||||
|
||||
*/
|
||||
|
||||
// OLED (may be different controllers depending on screen size)
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
#define HAS_SCREEN 1 // Generates randomized BLE pin
|
||||
|
||||
// GNSS: Ai-Thinker GP-02 BDS/GNSS module
|
||||
#define GPS_RX_PIN 16
|
||||
#define GPS_TX_PIN 17
|
||||
|
||||
// Button
|
||||
#define BUTTON_PIN 15 // Right side button - if not available, set device.button_gpio to 0 from Meshtastic client
|
||||
|
||||
// LEDs
|
||||
#define LED_PIN 13 // Tx LED
|
||||
#define USER_LED 2 // Rx LED
|
||||
|
||||
// Buzzer
|
||||
#define PIN_BUZZER 33
|
||||
|
||||
// Battery sense
|
||||
#define BATTERY_PIN 35
|
||||
#define ADC_MULTIPLIER 2.01 // 100k + 100k, and add 1% tolerance
|
||||
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS ADC_RESOLUTION
|
||||
|
||||
// SPI
|
||||
#define LORA_SCK 18
|
||||
#define LORA_MISO 19
|
||||
#define LORA_MOSI 23
|
||||
|
||||
// LoRa
|
||||
#define LORA_CS 5
|
||||
#define LORA_DIO0 26 // a No connect on the SX1262/SX1268 module
|
||||
#define LORA_RESET 27 // RST for SX1276, and for SX1262/SX1268
|
||||
#define LORA_DIO1 12 // IRQ for SX1262/SX1268
|
||||
#define LORA_DIO2 RADIOLIB_NC // BUSY for SX1262/SX1268
|
||||
#define LORA_DIO3 // NC, but used as TCXO supply by E22 module
|
||||
#define LORA_RXEN 32 // RF switch RX (and E22 LNA) control by ESP32 GPIO
|
||||
#define LORA_TXEN 25 // RF switch TX (and E22 PA) control by ESP32 GPIO
|
||||
|
||||
// RX/TX for RFM95/SX127x
|
||||
#define RF95_RXEN LORA_RXEN
|
||||
#define RF95_TXEN LORA_TXEN
|
||||
// #define RF95_TCXO <GPIO#>
|
||||
|
||||
// common pinouts for SX126X modules
|
||||
#define SX126X_CS 5
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
#define SX126X_RXEN LORA_RXEN
|
||||
#define SX126X_TXEN LORA_TXEN
|
||||
|
||||
// Support alternative modules if soldered in place of E22
|
||||
#define USE_RF95 // RFM95/SX127x
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
#define USE_LLCC68
|
||||
|
||||
// E22 TCXO support
|
||||
#ifdef EBYTE_E22
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
|
||||
#endif
|
||||
@@ -1,11 +0,0 @@
|
||||
; Port to Disaster Radio's ESP32-v3 Dev Board
|
||||
[env:meshtastic-dr-dev]
|
||||
extends = esp32_base
|
||||
board = esp32doit-devkit-v1
|
||||
board_upload.maximum_size = 4194304
|
||||
board_upload.maximum_ram_size = 532480
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-D DR_DEV
|
||||
-D EBYTE_E22
|
||||
-I variants/esp32/diy/dr-dev
|
||||
@@ -1,76 +0,0 @@
|
||||
// Initialize i2c bus on sd_dat and esp_led pins, respectively. We need a bus to not hang on boot
|
||||
#define HAS_SCREEN 0
|
||||
#define I2C_SDA 4
|
||||
#define I2C_SCL 5
|
||||
#define BATTERY_PIN 34
|
||||
#define ADC_CHANNEL ADC1_GPIO34_CHANNEL
|
||||
|
||||
// GPS
|
||||
#undef GPS_RX_PIN
|
||||
#define GPS_RX_PIN NOT_A_PIN
|
||||
#define HAS_GPS 0
|
||||
|
||||
#define BUTTON_PIN 13 // The middle button GPIO on the T-Beam
|
||||
#define BUTTON_NEED_PULLUP
|
||||
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
|
||||
|
||||
#define LORA_DIO0 NOT_A_PIN // a No connect on the SX1262/SX1268 module
|
||||
#define LORA_RESET NOT_A_PIN // RST for SX1276, and for SX1262/SX1268
|
||||
#define LORA_DIO3 NOT_A_PIN // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
|
||||
|
||||
// In transmitting, set TXEN as high communication level，RXEN pin is low level;
|
||||
// In receiving, set RXEN as high communication level, TXEN is lowlevel;
|
||||
// Before powering off, set TXEN、RXEN as low level.
|
||||
|
||||
#undef LORA_SCK
|
||||
#define LORA_SCK 18
|
||||
#undef LORA_MISO
|
||||
#define LORA_MISO 19
|
||||
#undef LORA_MOSI
|
||||
#define LORA_MOSI 23
|
||||
|
||||
// PINS FOR THE 900M22S
|
||||
|
||||
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
|
||||
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
|
||||
// NOT_A_PIN is treated as RADIOLIB_NC due to how they are defined, best to use RADIOLIB_NC directly
|
||||
#define LORA_TXEN RADIOLIB_NC // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
|
||||
// E22_TXEN_CONNECTED_TO_DIO2 wasn't defined, so RXEN wasn't controlled. Commented it out to maintain behavior, but shouldn't be.
|
||||
// Need to comment out defining SX126X_RXEN as LORA_RXEN too
|
||||
// #define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
|
||||
#undef LORA_CS
|
||||
#define LORA_CS 16
|
||||
#define SX126X_BUSY 22
|
||||
#define SX126X_CS 16
|
||||
|
||||
// PINS FOR THE 900M30S
|
||||
/*
|
||||
#define LORA_DIO1 27 // IRQ for SX1262/SX1268
|
||||
#define LORA_DIO2 35 // BUSY for SX1262/SX1268
|
||||
#define LORA_TXEN NOT_A_PIN // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
|
||||
#define LORA_RXEN 21 // Input - RF switch RX control, connecting external MCU IO, valid in high level
|
||||
#undef LORA_CS
|
||||
#define LORA_CS 33
|
||||
#define SX126X_BUSY 35
|
||||
#define SX126X_CS 33
|
||||
*/
|
||||
|
||||
// RX/TX for RFM95/SX127x
|
||||
// #define RF95_RXEN LORA_RXEN
|
||||
#define RF95_TXEN LORA_TXEN
|
||||
// #define RF95_TCXO <GPIO#>
|
||||
|
||||
// common pinouts for SX126X modules
|
||||
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_RESET LORA_RESET
|
||||
// #define SX126X_RXEN LORA_RXEN
|
||||
#define SX126X_TXEN LORA_TXEN
|
||||
|
||||
// supported modules list
|
||||
// #define USE_RF95 // RFM95/SX127x
|
||||
#define USE_SX1262
|
||||
// #define USE_SX1268
|
||||
// #define USE_LLCC68
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
@@ -1,8 +0,0 @@
|
||||
; Hydra - Meshtastic DIY v1 hardware with some specific changes
|
||||
[env:hydra]
|
||||
extends = esp32_base
|
||||
board = esp32doit-devkit-v1
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-D DIY_V1
|
||||
-I variants/esp32/diy/hydra
|
||||
@@ -1,46 +0,0 @@
|
||||
// For OLED LCD
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
|
||||
// For GPS, 'undef's not needed
|
||||
#define GPS_TX_PIN 15
|
||||
#define GPS_RX_PIN 12
|
||||
#define PIN_GPS_EN 4
|
||||
|
||||
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
|
||||
// Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups.
|
||||
// If 39 is not being used for a button, it is suggested to remove the #define.
|
||||
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
|
||||
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
|
||||
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
|
||||
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
|
||||
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
|
||||
|
||||
// Radio
|
||||
#define USE_SX1262 // E22-900M30S uses SX1262
|
||||
#define USE_SX1268 // E22-400M30S uses SX1268
|
||||
#define SX126X_MAX_POWER \
|
||||
22 // Outputting 22dBm from SX1262 results in ~30dBm E22-900M30S output (module only uses last stage of the YP2233W PA)
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // E22 series TCXO reference voltage is 1.8V
|
||||
|
||||
#define SX126X_CS 18 // EBYTE module's NSS pin
|
||||
#define SX126X_SCK 5 // EBYTE module's SCK pin
|
||||
#define SX126X_MOSI 27 // EBYTE module's MOSI pin
|
||||
#define SX126X_MISO 19 // EBYTE module's MISO pin
|
||||
#define SX126X_RESET 23 // EBYTE module's NRST pin
|
||||
#define SX126X_BUSY 32 // EBYTE module's BUSY pin
|
||||
#define SX126X_DIO1 33 // EBYTE module's DIO1 pin
|
||||
|
||||
#define SX126X_TXEN 13 // Schematic connects EBYTE module's TXEN pin to MCU
|
||||
#define SX126X_RXEN 14 // Schematic connects EBYTE module's RXEN pin to MCU
|
||||
|
||||
#define LORA_CS SX126X_CS // Compatibility with variant file configuration structure
|
||||
#define LORA_SCK SX126X_SCK // Compatibility with variant file configuration structure
|
||||
#define LORA_MOSI SX126X_MOSI // Compatibility with variant file configuration structure
|
||||
#define LORA_MISO SX126X_MISO // Compatibility with variant file configuration structure
|
||||
#define LORA_DIO1 SX126X_DIO1 // Compatibility with variant file configuration structure
|
||||
#define LORA_TXEN SX126X_TXEN // Compatibility with variant file configuration structure
|
||||
#define LORA_RXEN SX126X_RXEN // Compatibility with variant file configuration structure
|
||||
#define LORA_RESET SX126X_RESET // Compatibility with variant file configuration structure
|
||||
#define LORA_DIO2 SX126X_BUSY // Compatibility with variant file configuration structure
|
||||
@@ -1,10 +0,0 @@
|
||||
; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
|
||||
[env:meshtastic-diy-v1]
|
||||
extends = esp32_base
|
||||
board = esp32doit-devkit-v1
|
||||
board_check = true
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-D DIY_V1
|
||||
-D EBYTE_E22
|
||||
-I variants/esp32/diy/v1
|
||||
@@ -1,57 +0,0 @@
|
||||
// For OLED LCD
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
|
||||
// GPS
|
||||
#undef GPS_RX_PIN
|
||||
#undef GPS_TX_PIN
|
||||
#define GPS_RX_PIN 12
|
||||
#define GPS_TX_PIN 15
|
||||
#define GPS_UBLOX
|
||||
|
||||
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
|
||||
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
|
||||
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
|
||||
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
|
||||
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
|
||||
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
|
||||
|
||||
#define LORA_DIO0 26 // a No connect on the SX1262/SX1268 module
|
||||
#define LORA_RESET 23 // RST for SX1276, and for SX1262/SX1268
|
||||
#define LORA_DIO1 33 // IRQ for SX1262/SX1268
|
||||
#define LORA_DIO2 32 // BUSY for SX1262/SX1268
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
|
||||
|
||||
#define LORA_SCK 5
|
||||
#define LORA_MISO 19
|
||||
#define LORA_MOSI 27
|
||||
#define LORA_CS 18
|
||||
|
||||
// supported modules list
|
||||
#define USE_RF95 // RFM95/SX127x
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
#define USE_LLCC68
|
||||
|
||||
// common pinouts for SX126X modules
|
||||
#define SX126X_CS 18 // NSS for SX126X
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
#define SX126X_RXEN RADIOLIB_NC // Defining the RXEN ruins RFSwitching for the E22 900M30S in RadioLib
|
||||
#define SX126X_TXEN 13
|
||||
|
||||
// RX/TX for RFM95/SX127x
|
||||
#define RF95_RXEN 14
|
||||
#define RF95_TXEN 13
|
||||
|
||||
// Set lora.tx_power to 13 for Hydra or other E22 900M30S target due to PA
|
||||
#define SX126X_MAX_POWER 22
|
||||
|
||||
#ifdef EBYTE_E22
|
||||
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
|
||||
// (which is the default for the sx1262interface code)
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
|
||||
#endif
|
||||
@@ -1,10 +0,0 @@
|
||||
; Meshtastic DIY v1.1 new schematic based on ESP32-WROOM-32 & SX1262/SX1268 modules
|
||||
[env:meshtastic-diy-v1_1]
|
||||
extends = esp32_base
|
||||
board = esp32doit-devkit-v1
|
||||
board_level = extra
|
||||
build_flags =
|
||||
${esp32_base.build_flags}
|
||||
-D DIY_V1
|
||||
-D EBYTE_E22
|
||||
-I variants/esp32/diy/v1_1
|
||||
@@ -1,58 +0,0 @@
|
||||
// For OLED LCD
|
||||
#define I2C_SDA 21
|
||||
#define I2C_SCL 22
|
||||
|
||||
// GPS
|
||||
#undef GPS_RX_PIN
|
||||
#define GPS_RX_PIN 15
|
||||
|
||||
#define BUTTON_PIN 2 // The middle button GPIO on the T-Beam
|
||||
#define BUTTON_NEED_PULLUP
|
||||
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
|
||||
|
||||
#define LORA_DIO0 26 // a No connect on the SX1262/SX1268 module
|
||||
#define LORA_RESET 27 // RST for SX1276, and for SX1262/SX1268
|
||||
#define LORA_DIO1 33 // IRQ for SX1262/SX1268
|
||||
#define LORA_DIO2 32 // BUSY for SX1262/SX1268
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
|
||||
|
||||
// In transmitting, set TXEN as high communication level，RXEN pin is low level;
|
||||
// In receiving, set RXEN as high communication level, TXEN is lowlevel;
|
||||
// Before powering off, set TXEN、RXEN as low level.
|
||||
#define LORA_RXEN 14 // Input - RF switch RX control, connecting external MCU IO, valid in high level
|
||||
#define LORA_TXEN 13 // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
|
||||
|
||||
#undef LORA_SCK
|
||||
#define LORA_SCK 18
|
||||
#undef LORA_MISO
|
||||
#define LORA_MISO 19
|
||||
#undef LORA_MOSI
|
||||
#define LORA_MOSI 23
|
||||
#undef LORA_CS
|
||||
#define LORA_CS 5
|
||||
|
||||
// RX/TX for RFM95/SX127x
|
||||
#define RF95_RXEN LORA_RXEN
|
||||
#define RF95_TXEN LORA_TXEN
|
||||
// #define RF95_TCXO <GPIO#>
|
||||
|
||||
// common pinouts for SX126X modules
|
||||
#define SX126X_CS 5
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
#define SX126X_RXEN LORA_RXEN
|
||||
#define SX126X_TXEN LORA_TXEN
|
||||
|
||||
// supported modules list
|
||||
#define USE_RF95 // RFM95/SX127x
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
#define USE_LLCC68
|
||||
|
||||
#ifdef EBYTE_E22
|
||||
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
|
||||
// (which is the default for the sx1262interface code)
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
|
||||
#endif
|
||||
Reference in New Issue
Block a user