Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-06 16:29:48 +08:00
parent afdd525324
commit ff19e9c6a4
3110 changed files with 8 additions and 523962 deletions
@@ -1,59 +0,0 @@
-#ifndef _VARIANT_MESHTAB_DIY_
-#define _VARIANT_MESHTAB_DIY_
-
-#define HAS_TOUCHSCREEN 1
-
-#define USE_POWERSAVE
-#define SLEEP_TIME 180
-
-// Analog pins
-#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-// ratio of voltage divider (100k, 220k)
-#define ADC_MULTIPLIER 1.6 // 1.45 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
-
-// LED
-#define LED_PIN 21
-
-// Button
-#define BUTTON_PIN 0
-
-// Button
-#define PIN_BUZZER 5
-
-// GPS
-#define GPS_RX_PIN 18
-#define GPS_TX_PIN 17
-
-// #define HAS_SDCARD 1
-#define SPI_MOSI 13
-#define SPI_SCK 12
-#define SPI_MISO 11
-#define SPI_CS 10
-#define SDCARD_CS 6
-
-// LORA MODULES
-#define USE_SX1262
-
-// LORA SPI
-#define LORA_SCK 36
-#define LORA_MISO 37
-#define LORA_MOSI 35
-#define LORA_CS 39
-
-// LORA CONFIG
-#define LORA_DIO0 -1 // a No connect on the SX1262 module
-#define LORA_RESET 14
-#define LORA_DIO1 15 // SX1262 IRQ
-#define LORA_DIO2 40 // SX1262 BUSY
-#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262
-
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_BUSY LORA_DIO2
-#define SX126X_RESET 14
-#define SX126X_RXEN 47
-#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin
-
-#endif