Signed-off-by: 吴文峰 <kevin@lmve.net>

2026-03-06 16:29:48 +08:00
parent afdd525324
commit ff19e9c6a4
3110 changed files with 8 additions and 523962 deletions
@@ -1,25 +0,0 @@
-[env:wio-e5]
-extends = stm32_base
-board = lora_e5_dev_board
-board_level = pr
-board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
-build_flags =
-  ${stm32_base.build_flags}
-  -Ivariants/stm32/wio-e5
-  -DSERIAL_UART_INSTANCE=1
-  -DPIN_SERIAL_RX=PB7
-  -DPIN_SERIAL_TX=PB6
-  -DPIN_WIRE_SDA=PA15
-  -DPIN_WIRE_SCL=PB15
-  -DHAS_SENSOR=1
-  -DENABLE_HWSERIAL2
-  -DPIN_SERIAL2_TX=PA2
-  -DPIN_SERIAL2_RX=PA3
-  -DHAS_GPS=1
-  -DGPS_SERIAL_PORT=Serial2
-
-upload_port = stlink
-
-lib_deps =
-  ${stm32_base.lib_deps}
-  # Add your custom sensor here!
@@ -1,8 +0,0 @@
-/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
- * Wio-E5 module ONLY transmits through RFO_HP
- * Receive: PA4=1, PA5=0
- * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
-static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
-
-static const Module::RfSwitchMode_t rfswitch_table[4] = {
-    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};
@@ -1,27 +0,0 @@
-/*
-Wio-E5 mini (formerly LoRa-E5 mini)
-https://www.seeedstudio.com/LoRa-E5-mini-STM32WLE5JC-p-4869.html
-https://www.seeedstudio.com/LoRa-E5-Wireless-Module-p-4745.html
-*/
-
-/*
-This variant is a work in progress.
-Do not expect a working Meshtastic device with this target.
-*/
-
-#ifndef _VARIANT_WIOE5_
-#define _VARIANT_WIOE5_
-
-#define USE_STM32WLx
-
-#define LED_PIN PB5
-#define LED_STATE_ON 0
-
-#define WIO_E5
-
-#if (defined(LED_BUILTIN) && LED_BUILTIN == PNUM_NOT_DEFINED)
-#undef LED_BUILTIN
-#define LED_BUILTIN (LED_PIN)
-#endif
-
-#endif