Lora:
  Module: sx1268
  CS: 0
  IRQ: 6
  Reset: 1
  Busy: 4
  RXen: 2
  DIO2_AS_RF_SWITCH: true
  spidev: ch341
  USB_PID: 0x5512
  USB_VID: 0x1A86
  DIO3_TCXO_VOLTAGE: true
#  USB_Serialnum: 12345678
  SX126X_MAX_POWER: 22
# Reduce output power to improve EMI
  TX_GAIN_LORA: [12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7]
# Note: This module integrates an additional PA to achieve higher output power.
# The 'power' parameter here does not represent the actual RF output.
# TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
# Each array element corresponds to the additional gain when that input level is set,
# The effective RF output is: Pout ≈ Pset + TX_GAIN_LORA[index].
# Please refer to https://github.com/linser233/uMesh/blob/main/RF_Power.md for detailed information.