58 lines
1.3 KiB
C
58 lines
1.3 KiB
C
// Display (E-Ink)
|
|
|
|
#define PIN_EINK_CS 13
|
|
#define PIN_EINK_BUSY 10
|
|
#define PIN_EINK_RES 11
|
|
#define PIN_EINK_SCLK 14
|
|
#define PIN_EINK_MOSI 15
|
|
#define PIN_EINK_DC 12
|
|
#define PIN_EINK_EN 42
|
|
|
|
#define SPI_INTERFACES_COUNT 2
|
|
#define PIN_SPI1_MISO -1
|
|
#define PIN_SPI1_MOSI PIN_EINK_MOSI
|
|
#define PIN_SPI1_SCK PIN_EINK_SCLK
|
|
#define DISPLAY_FORCE_SMALL_FONTS
|
|
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
#define BATTERY_PIN 2 // A battery voltage measurement pin, voltage divider connected here to
|
|
// measure battery voltage ratio of voltage divider = 2.0 (assumption)
|
|
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
|
|
#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
|
|
|
|
#define HAS_GPS 0
|
|
#undef GPS_RX_PIN
|
|
#undef GPS_TX_PIN
|
|
|
|
#define BUTTON_PIN 3
|
|
#define BUTTON_NEED_PULLUP
|
|
#define ALT_BUTTON_PIN 4
|
|
#define ALT_BUTTON_ACTIVE_LOW true
|
|
#define ALT_BUTTON_ACTIVE_PULLUP true
|
|
#define PIN_BUTTON3 0
|
|
|
|
// #define HAS_SDCARD 1
|
|
// #define SDCARD_USE_SOFT_SPI
|
|
|
|
// PCF85063 RTC Module
|
|
#define PCF85063_RTC 0x51
|
|
#define HAS_RTC 1
|
|
|
|
#define USE_SX1262
|
|
#define LORA_DIO1 5
|
|
#define LORA_SCK 8
|
|
#define LORA_MISO 6
|
|
#define LORA_MOSI 17
|
|
#define LORA_CS 7 // CS not connected; IO7 is free
|
|
#define LORA_RESET 21
|
|
|
|
#ifdef USE_SX1262
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY 16
|
|
#define SX126X_RESET LORA_RESET
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
#endif
|