Merge remote-tracking branch 'origin/master' into develop
This commit is contained in:
Jonathan Bennett
@@ -0,0 +1,39 @@
|
||||
# MeshAdv-Pi E22-900M30S
|
||||
# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
|
||||
Meta:
|
||||
name: MeshAdv-Pi E22-900M30S
|
||||
support: community
|
||||
compatible:
|
||||
- ebyte-ecb41-pge # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
CS: # GPIO0_A1 (physical 40)
|
||||
pin: 1
|
||||
gpiochip: 0
|
||||
line: 1
|
||||
IRQ: # GPIO0_A3 (physical 36)
|
||||
pin: 3
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
Busy: # GPIO0_A0 (physical 38)
|
||||
pin: 0
|
||||
gpiochip: 0
|
||||
line: 0
|
||||
Reset: # GPIO0_B4 (physical 12)
|
||||
pin: 12
|
||||
gpiochip: 0
|
||||
line: 12
|
||||
TXen: # GPIO1_D1 (physical 33)
|
||||
pin: 57
|
||||
gpiochip: 1
|
||||
line: 25
|
||||
RXen: # GPIO1_B3 (physical 32)
|
||||
pin: 43
|
||||
gpiochip: 1
|
||||
line: 11
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
# Only for E22-900M33S:
|
||||
# Limit the output power to 8 dBm
|
||||
# SX126X_MAX_POWER: 8
|
||||
spidev: spidev0.0
|
||||
@@ -0,0 +1,33 @@
|
||||
# MeshAdv Mini E22-900M22S
|
||||
# https://github.com/chrismyers2000/MeshAdv-Mini
|
||||
Meta:
|
||||
name: MeshAdv Mini E22-900M22S
|
||||
support: community
|
||||
compatible:
|
||||
- ebyte-ecb41-pge # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262 # Ebyte E22-900M22S
|
||||
CS: # GPIO0_B6 (physical 24, SPI1_CSN0)
|
||||
pin: 14
|
||||
gpiochip: 0
|
||||
line: 14
|
||||
IRQ: # GPIO0_A3 (physical 36)
|
||||
pin: 3
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
Busy: # GPIO0_A0 (physical 38)
|
||||
pin: 0
|
||||
gpiochip: 0
|
||||
line: 0
|
||||
Reset: # GPIO1_C3 (physical 18)
|
||||
pin: 51
|
||||
gpiochip: 1
|
||||
line: 19
|
||||
RXen: # GPIO1_B3 (physical 32)
|
||||
pin: 43
|
||||
gpiochip: 1
|
||||
line: 11
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
spidev: spidev0.0
|
||||
@@ -0,0 +1,38 @@
|
||||
Meta:
|
||||
name: RAK6421 + RAK13300 Slot 1
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- ebyte-ecb41-pge # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO0_A5 (IO6, physical 15)
|
||||
pin: 5
|
||||
gpiochip: 0
|
||||
line: 5
|
||||
Reset: # GPIO0_A3 (IO4, physical 36)
|
||||
pin: 3
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
Busy: # GPIO1_C3 (IO5, physical 18)
|
||||
pin: 51
|
||||
gpiochip: 1
|
||||
line: 19
|
||||
# Ant_sw: # GPIO1_C2 (IO3, physical 16)
|
||||
# pin: 50
|
||||
# gpiochip: 1
|
||||
# line: 18
|
||||
Enable_Pins:
|
||||
- pin: 43 # GPIO1_B3 (physical 32)
|
||||
gpiochip: 1
|
||||
line: 11
|
||||
- pin: 57 # GPIO1_D1 (physical 33)
|
||||
gpiochip: 1
|
||||
line: 25
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
spidev: spidev0.0
|
||||
# CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
|
||||
# pin: 14
|
||||
# gpiochip: 0
|
||||
# line: 14
|
||||
@@ -0,0 +1,36 @@
|
||||
Meta:
|
||||
name: RAK6421 + RAK13300 Slot 2
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- ebyte-ecb41-pge # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO0_B4 (IO6, physical 12)
|
||||
pin: 12
|
||||
gpiochip: 0
|
||||
line: 12
|
||||
Reset: # GPIO1_C3 (IO4, physical 18)
|
||||
pin: 51
|
||||
gpiochip: 1
|
||||
line: 19
|
||||
Busy: # GPIO0_B3 (IO5, physical 35)
|
||||
pin: 11
|
||||
gpiochip: 0
|
||||
line: 11
|
||||
# Ant_sw: # GPIO1_C2 (IO3, physical 16)
|
||||
# pin: 50
|
||||
# gpiochip: 1
|
||||
# line: 18
|
||||
Enable_Pins:
|
||||
- pin: 2 # GPIO0_A2 (physical 37)
|
||||
gpiochip: 0
|
||||
line: 2
|
||||
- pin: 50 # GPIO1_C2 (physical 16)
|
||||
gpiochip: 1
|
||||
line: 18
|
||||
spidev: spidev0.1
|
||||
# CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
|
||||
# pin: 7
|
||||
# gpiochip: 0
|
||||
# line: 7
|
||||
@@ -0,0 +1,39 @@
|
||||
Meta:
|
||||
name: RAK6421 + RAK13302 Slot 1
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- ebyte-ecb41-pge # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO0_A5 (IO6, physical 15)
|
||||
pin: 5
|
||||
gpiochip: 0
|
||||
line: 5
|
||||
Reset: # GPIO0_A3 (IO4, physical 36)
|
||||
pin: 3
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
Busy: # GPIO1_C3 (IO5, physical 18)
|
||||
pin: 51
|
||||
gpiochip: 1
|
||||
line: 19
|
||||
# Ant_sw: # GPIO1_C2 (IO3, physical 16)
|
||||
# pin: 50
|
||||
# gpiochip: 1
|
||||
# line: 18
|
||||
Enable_Pins:
|
||||
- pin: 43 # GPIO1_B3 (physical 32)
|
||||
gpiochip: 1
|
||||
line: 11
|
||||
- pin: 57 # GPIO1_D1 (physical 33)
|
||||
gpiochip: 1
|
||||
line: 25
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
spidev: spidev0.0
|
||||
# CS: # GPIO0_B6 (SPI1_CSN0, physical 24)
|
||||
# pin: 14
|
||||
# gpiochip: 0
|
||||
# line: 14
|
||||
TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
|
||||
@@ -0,0 +1,37 @@
|
||||
Meta:
|
||||
name: RAK6421 + RAK13302 Slot 2
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- ebyte-ecb41-pge # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO0_B4 (IO6, physical 12)
|
||||
pin: 12
|
||||
gpiochip: 0
|
||||
line: 12
|
||||
Reset: # GPIO1_C3 (IO4, physical 18)
|
||||
pin: 51
|
||||
gpiochip: 1
|
||||
line: 19
|
||||
Busy: # GPIO0_B3 (IO5, physical 35)
|
||||
pin: 11
|
||||
gpiochip: 0
|
||||
line: 11
|
||||
# Ant_sw: # GPIO1_C2 (IO3, physical 16)
|
||||
# pin: 50
|
||||
# gpiochip: 1
|
||||
# line: 18
|
||||
Enable_Pins:
|
||||
- pin: 2 # GPIO0_A2 (physical 37)
|
||||
gpiochip: 0
|
||||
line: 2
|
||||
- pin: 50 # GPIO1_C2 (physical 16)
|
||||
gpiochip: 1
|
||||
line: 18
|
||||
spidev: spidev0.1
|
||||
# CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
|
||||
# pin: 7
|
||||
# gpiochip: 0
|
||||
# line: 7
|
||||
TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
|
||||
@@ -0,0 +1,30 @@
|
||||
Meta:
|
||||
name: Waveshare SX1262
|
||||
support: deprecated
|
||||
compatible:
|
||||
- ebyte-ecb41-pge # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262 # Waveshare SX126X XXXM
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
CS: # GPIO0_A1 (physical 40)
|
||||
pin: 1
|
||||
gpiochip: 0
|
||||
line: 1
|
||||
IRQ: # GPIO0_A3 (physical 36)
|
||||
pin: 3
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
Busy: # GPIO0_A0 (physical 38)
|
||||
pin: 0
|
||||
gpiochip: 0
|
||||
line: 0
|
||||
Reset: # GPIO0_B4 (physical 12)
|
||||
pin: 12
|
||||
gpiochip: 0
|
||||
line: 12
|
||||
SX126X_ANT_SW: # GPIO1_B2 (physical 31)
|
||||
pin: 42
|
||||
gpiochip: 1
|
||||
line: 10
|
||||
spidev: spidev0.0
|
||||
@@ -0,0 +1,41 @@
|
||||
# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
|
||||
|
||||
# MeshAdv-Pi E22-900M30S
|
||||
# https://github.com/chrismyers2000/MeshAdv-Pi-Hat
|
||||
Meta:
|
||||
name: MeshAdv-Pi E22-900M30S
|
||||
support: community
|
||||
compatible:
|
||||
- forlinx-ok3506-s12 # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
CS: # GPIO0_B0 (physical 40)
|
||||
pin: 8
|
||||
gpiochip: 0
|
||||
line: 8
|
||||
IRQ: # GPIO3_B0 (physical 36)
|
||||
pin: 104
|
||||
gpiochip: 3
|
||||
line: 8
|
||||
Busy: # GPIO0_B1 (physical 38)
|
||||
pin: 9
|
||||
gpiochip: 0
|
||||
line: 9
|
||||
Reset: # GPIO0_B6 (physical 12)
|
||||
pin: 14
|
||||
gpiochip: 0
|
||||
line: 14
|
||||
TXen: # GPIO0_A3 (physical 33)
|
||||
pin: 3
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
RXen: # GPIO0_A2 (physical 32)
|
||||
pin: 2
|
||||
gpiochip: 0
|
||||
line: 2
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
# Only for E22-900M33S:
|
||||
# Limit the output power to 8 dBm
|
||||
# SX126X_MAX_POWER: 8
|
||||
spidev: spidev0.0
|
||||
@@ -0,0 +1,35 @@
|
||||
# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
|
||||
|
||||
# MeshAdv Mini E22-900M22S
|
||||
# https://github.com/chrismyers2000/MeshAdv-Mini
|
||||
Meta:
|
||||
name: MeshAdv Mini E22-900M22S
|
||||
support: community
|
||||
compatible:
|
||||
- forlinx-ok3506-s12 # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262 # Ebyte E22-900M22S
|
||||
CS: # GPIO0_C3 (physical 24, SPI0_CSN0)
|
||||
pin: 19
|
||||
gpiochip: 0
|
||||
line: 19
|
||||
IRQ: # GPIO3_B0 (physical 36)
|
||||
pin: 104
|
||||
gpiochip: 3
|
||||
line: 8
|
||||
Busy: # GPIO0_B1 (physical 38)
|
||||
pin: 9
|
||||
gpiochip: 0
|
||||
line: 9
|
||||
Reset: # GPIO3_A6 (physical 18)
|
||||
pin: 102
|
||||
gpiochip: 3
|
||||
line: 6
|
||||
RXen: # GPIO0_A2 (physical 32)
|
||||
pin: 2
|
||||
gpiochip: 0
|
||||
line: 2
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
spidev: spidev0.0
|
||||
@@ -0,0 +1,40 @@
|
||||
# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
|
||||
|
||||
Meta:
|
||||
name: RAK6421 + RAK13300 Slot 1
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- forlinx-ok3506-s12 # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO3_B5 (IO6, physical 15)
|
||||
pin: 109
|
||||
gpiochip: 3
|
||||
line: 13
|
||||
Reset: # GPIO3_B0 (IO4, physical 36)
|
||||
pin: 104
|
||||
gpiochip: 3
|
||||
line: 8
|
||||
Busy: # GPIO3_A6 (IO5, physical 18)
|
||||
pin: 102
|
||||
gpiochip: 3
|
||||
line: 6
|
||||
# Ant_sw: # GPIO0_A3 (IO3, physical 33)
|
||||
# pin: 3
|
||||
# gpiochip: 0
|
||||
# line: 3
|
||||
Enable_Pins:
|
||||
- pin: 2 # GPIO0_A2 (physical 32)
|
||||
gpiochip: 0
|
||||
line: 2
|
||||
- pin: 3 # GPIO0_A3 (physical 33)
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
spidev: spidev0.0
|
||||
# CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
|
||||
# pin: 19
|
||||
# gpiochip: 0
|
||||
# line: 19
|
||||
@@ -0,0 +1,38 @@
|
||||
# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
|
||||
|
||||
Meta:
|
||||
name: RAK6421 + RAK13300 Slot 2
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- forlinx-ok3506-s12 # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO0_B6 (IO6, physical 12)
|
||||
pin: 14
|
||||
gpiochip: 0
|
||||
line: 14
|
||||
Reset: # GPIO3_A6 (IO4, physical 18)
|
||||
pin: 102
|
||||
gpiochip: 3
|
||||
line: 6
|
||||
Busy: # GPIO0_B2 (IO5, physical 35)
|
||||
pin: 10
|
||||
gpiochip: 0
|
||||
line: 10
|
||||
# Ant_sw: # GPIO3_A7 (IO3, physical 16)
|
||||
# pin: 103
|
||||
# gpiochip: 3
|
||||
# line: 7
|
||||
Enable_Pins:
|
||||
- pin: 106 # GPIO3_B2 (physical 37)
|
||||
gpiochip: 3
|
||||
line: 10
|
||||
- pin: 103 # GPIO3_A7 (physical 16)
|
||||
gpiochip: 3
|
||||
line: 7
|
||||
spidev: spidev0.1
|
||||
# CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
|
||||
# pin: 15
|
||||
# gpiochip: 0
|
||||
# line: 15
|
||||
@@ -0,0 +1,41 @@
|
||||
# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
|
||||
|
||||
Meta:
|
||||
name: RAK6421 + RAK13302 Slot 1
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- forlinx-ok3506-s12 # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO3_B5 (IO6, physical 15)
|
||||
pin: 109
|
||||
gpiochip: 3
|
||||
line: 13
|
||||
Reset: # GPIO3_B0 (IO4, physical 36)
|
||||
pin: 104
|
||||
gpiochip: 3
|
||||
line: 8
|
||||
Busy: # GPIO3_A6 (IO5, physical 18)
|
||||
pin: 102
|
||||
gpiochip: 3
|
||||
line: 6
|
||||
# Ant_sw: # GPIO0_A3 (IO3, physical 33)
|
||||
# pin: 3
|
||||
# gpiochip: 0
|
||||
# line: 3
|
||||
Enable_Pins:
|
||||
- pin: 2 # GPIO0_A2 (physical 32)
|
||||
gpiochip: 0
|
||||
line: 2
|
||||
- pin: 3 # GPIO0_A3 (physical 33)
|
||||
gpiochip: 0
|
||||
line: 3
|
||||
DIO3_TCXO_VOLTAGE: true
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
spidev: spidev0.0
|
||||
# CS: # GPIO0_C3 (SPI0_CSN0, physical 24)
|
||||
# pin: 19
|
||||
# gpiochip: 0
|
||||
# line: 19
|
||||
TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
|
||||
@@ -0,0 +1,39 @@
|
||||
# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
|
||||
|
||||
Meta:
|
||||
name: RAK6421 + RAK13302 Slot 2
|
||||
support: community # Promote when tested
|
||||
compatible:
|
||||
- forlinx-ok3506-s12 # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262
|
||||
IRQ: # GPIO0_B6 (IO6, physical 12)
|
||||
pin: 14
|
||||
gpiochip: 0
|
||||
line: 14
|
||||
Reset: # GPIO3_A6 (IO4, physical 18)
|
||||
pin: 102
|
||||
gpiochip: 3
|
||||
line: 6
|
||||
Busy: # GPIO0_B2 (IO5, physical 35)
|
||||
pin: 10
|
||||
gpiochip: 0
|
||||
line: 10
|
||||
# Ant_sw: # GPIO3_A7 (IO3, physical 16)
|
||||
# pin: 103
|
||||
# gpiochip: 3
|
||||
# line: 7
|
||||
Enable_Pins:
|
||||
- pin: 106 # GPIO3_B2 (physical 37)
|
||||
gpiochip: 3
|
||||
line: 10
|
||||
- pin: 103 # GPIO3_A7 (physical 16)
|
||||
gpiochip: 3
|
||||
line: 7
|
||||
spidev: spidev0.1
|
||||
# CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
|
||||
# pin: 15
|
||||
# gpiochip: 0
|
||||
# line: 15
|
||||
TX_GAIN_LORA: [9, 9, 10, 11, 9, 8, 9, 10, 10, 10, 11, 12, 12, 12, 12, 12, 12, 12, 12, 10, 9, 8]
|
||||
@@ -0,0 +1,32 @@
|
||||
# !! WARNING: Hats on the OK3506 board are installed "backwards" (facing outwards)
|
||||
|
||||
Meta:
|
||||
name: Waveshare SX1262
|
||||
support: deprecated
|
||||
compatible:
|
||||
- forlinx-ok3506-s12 # Armbian
|
||||
|
||||
Lora:
|
||||
Module: sx1262 # Waveshare SX126X XXXM
|
||||
DIO2_AS_RF_SWITCH: true
|
||||
CS: # GPIO0_B0 (physical 40)
|
||||
pin: 8
|
||||
gpiochip: 0
|
||||
line: 8
|
||||
IRQ: # GPIO3_B0 (physical 36)
|
||||
pin: 104
|
||||
gpiochip: 3
|
||||
line: 8
|
||||
Busy: # GPIO0_B1 (physical 38)
|
||||
pin: 9
|
||||
gpiochip: 0
|
||||
line: 9
|
||||
Reset: # GPIO0_B6 (physical 12)
|
||||
pin: 14
|
||||
gpiochip: 0
|
||||
line: 14
|
||||
SX126X_ANT_SW: # GPIO3_B3 (physical 31)
|
||||
pin: 107
|
||||
gpiochip: 3
|
||||
line: 11
|
||||
spidev: spidev0.0
|
||||
Reference in New Issue
Block a user