Files
meshtastic-firmware/src/modules/AdminModule.cpp
T

1619 lines
71 KiB
C++

#include "AdminModule.h"
#include "Channels.h"
#include "MeshService.h"
#include "NodeDB.h"
#include "PowerFSM.h"
#include "RTC.h"
#include "SPILock.h"
#include "input/InputBroker.h"
#include "meshUtils.h"
#include <FSCommon.h>
#include <ctype.h> // for better whitespace handling
#if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
#include "MeshtasticOTA.h"
#endif
#include "Router.h"
#include "configuration.h"
#include "main.h"
#ifdef ARCH_NRF52
#include "main.h"
#endif
#ifdef ARCH_PORTDUINO
#include "unistd.h"
#endif
#include "Default.h"
#include "MeshRadio.h"
#include "RadioInterface.h"
#include "TypeConversions.h"
#include "mesh/RadioLibInterface.h"
#if !MESHTASTIC_EXCLUDE_MQTT
#include "mqtt/MQTT.h"
#endif
#if !MESHTASTIC_EXCLUDE_GPS
#include "GPS.h"
#endif
#if MESHTASTIC_EXCLUDE_GPS
#include "modules/PositionModule.h"
#endif
#if !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && !MESHTASTIC_EXCLUDE_ACCELEROMETER
#include "motion/AccelerometerThread.h"
#endif
#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) && \
!defined(CONFIG_IDF_TARGET_ESP32C3)
#include "SerialModule.h"
#endif
AdminModule *adminModule;
bool hasOpenEditTransaction;
/// A special reserved string to indicate strings we can not share with external nodes. We will use this 'reserved' word instead.
/// Also, to make setting work correctly, if someone tries to set a string to this reserved value we assume they don't really want
/// a change.
static const char *secretReserved = "sekrit";
/// If buf is the reserved secret word, replace the buffer with currentVal
static void writeSecret(char *buf, size_t bufsz, const char *currentVal)
{
if (strcmp(buf, secretReserved) == 0) {
strncpy(buf, currentVal, bufsz);
}
}
/**
* @brief Handle received protobuf message
*
* @param mp Received MeshPacket
* @param r Decoded AdminMessage
* @return bool
*/
bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_AdminMessage *r)
{
// if handled == false, then let others look at this message also if they want
bool handled = false;
assert(r);
bool fromOthers = !isFromUs(&mp);
if (mp.which_payload_variant != meshtastic_MeshPacket_decoded_tag) {
return handled;
}
meshtastic_Channel *ch = &channels.getByIndex(mp.channel);
// Could tighten this up further by tracking the last public_key we went an AdminMessage request to
// and only allowing responses from that remote.
if (messageIsResponse(r)) {
LOG_DEBUG("Allow admin response message");
} else if (mp.from == 0) {
if (config.security.is_managed) {
LOG_INFO("Ignore local admin payload because is_managed");
return handled;
}
} else if (strcasecmp(ch->settings.name, Channels::adminChannel) == 0) {
if (!config.security.admin_channel_enabled) {
LOG_INFO("Ignore admin channel, legacy admin is disabled");
myReply = allocErrorResponse(meshtastic_Routing_Error_NOT_AUTHORIZED, &mp);
return handled;
}
} else if (mp.pki_encrypted) {
if ((config.security.admin_key[0].size == 32 &&
memcmp(mp.public_key.bytes, config.security.admin_key[0].bytes, 32) == 0) ||
(config.security.admin_key[1].size == 32 &&
memcmp(mp.public_key.bytes, config.security.admin_key[1].bytes, 32) == 0) ||
(config.security.admin_key[2].size == 32 &&
memcmp(mp.public_key.bytes, config.security.admin_key[2].bytes, 32) == 0)) {
LOG_INFO("PKC admin payload with authorized sender key");
// Automatically favorite the node that is using the admin key
auto remoteNode = nodeDB->getMeshNode(mp.from);
if (remoteNode && !nodeInfoLiteIsFavorite(remoteNode)) {
if (config.device.role == meshtastic_Config_DeviceConfig_Role_CLIENT_BASE) {
// Special case for CLIENT_BASE: is_favorite has special meaning, and we don't want to automatically set it
// without the user doing so deliberately.
LOG_INFO("PKC admin valid, but not auto-favoriting node %x because role==CLIENT_BASE", mp.from);
} else {
LOG_INFO("PKC admin valid. Auto-favoriting node %x", mp.from);
nodeInfoLiteSetBit(remoteNode, NODEINFO_BITFIELD_IS_FAVORITE_MASK, true);
}
}
} else {
myReply = allocErrorResponse(meshtastic_Routing_Error_ADMIN_PUBLIC_KEY_UNAUTHORIZED, &mp);
LOG_INFO("Received PKC admin payload, but the sender public key does not match the admin authorized key!");
return handled;
}
} else {
LOG_INFO("Ignore unauthorized admin payload %i", r->which_payload_variant);
myReply = allocErrorResponse(meshtastic_Routing_Error_NOT_AUTHORIZED, &mp);
return handled;
}
LOG_INFO("Handle admin payload %i", r->which_payload_variant);
// all of the get and set messages, including those for other modules, flow through here first.
// any message that changes state, we want to check the passkey for
if (mp.from != 0 && !messageIsRequest(r) && !messageIsResponse(r)) {
if (!checkPassKey(r)) {
LOG_WARN("Admin message without session_key!");
myReply = allocErrorResponse(meshtastic_Routing_Error_ADMIN_BAD_SESSION_KEY, &mp);
return handled;
}
}
switch (r->which_payload_variant) {
/**
* Getters
*/
case meshtastic_AdminMessage_get_owner_request_tag:
LOG_DEBUG("Client got owner");
handleGetOwner(mp);
break;
case meshtastic_AdminMessage_get_config_request_tag:
LOG_DEBUG("Client got config");
handleGetConfig(mp, r->get_config_request);
break;
case meshtastic_AdminMessage_get_module_config_request_tag:
LOG_DEBUG("Client got module config");
handleGetModuleConfig(mp, r->get_module_config_request);
break;
case meshtastic_AdminMessage_get_channel_request_tag: {
uint32_t i = r->get_channel_request - 1;
LOG_DEBUG("Client got channel %u", i);
if (i >= MAX_NUM_CHANNELS)
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
else
handleGetChannel(mp, i);
break;
}
/**
* Setters
*/
case meshtastic_AdminMessage_set_owner_tag:
LOG_DEBUG("Client set owner");
// Validate names
if (*r->set_owner.long_name) {
const char *start = r->set_owner.long_name;
// Skip all whitespace (space, tab, newline, etc)
while (*start && isspace((unsigned char)*start))
start++;
if (*start == '\0') {
LOG_WARN("Rejected long_name: must contain at least 1 non-whitespace character");
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
break;
}
}
if (*r->set_owner.short_name) {
const char *start = r->set_owner.short_name;
while (*start && isspace((unsigned char)*start))
start++;
if (*start == '\0') {
LOG_WARN("Rejected short_name: must contain at least 1 non-whitespace character");
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
break;
}
}
handleSetOwner(r->set_owner);
break;
case meshtastic_AdminMessage_set_config_tag: {
LOG_DEBUG("Client set config");
// Non-LoRa configs need no further validation.
if (r->set_config.which_payload_variant != meshtastic_Config_lora_tag) {
LOG_DEBUG("Non-LoRa config, applying directly");
handleSetConfig(r->set_config, fromOthers);
break;
}
// Only LORA_24 requires hardware capability validation.
if (r->set_config.payload_variant.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24) {
LOG_DEBUG("LoRa config, region is not LORA_24, applying directly");
handleSetConfig(r->set_config, fromOthers);
break;
}
// Hardware supports 2.4 GHz — apply the config.
// Fail closed: null instance is treated as incapable.
if (RadioLibInterface::instance && RadioLibInterface::instance->wideLora()) {
LOG_DEBUG("LORA_24 requested, radio hardware supports 2.4 GHz, applying");
handleSetConfig(r->set_config, fromOthers);
break;
}
LOG_WARN("Radio hardware does not support 2.4 GHz; rejecting LORA_24 region");
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
break;
}
case meshtastic_AdminMessage_set_module_config_tag:
LOG_DEBUG("Client set module config");
if (!handleSetModuleConfig(r->set_module_config)) {
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
}
break;
case meshtastic_AdminMessage_set_channel_tag:
LOG_DEBUG("Client set channel %d", r->set_channel.index);
if (r->set_channel.index < 0 || r->set_channel.index >= (int)MAX_NUM_CHANNELS)
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
else
handleSetChannel(r->set_channel);
break;
case meshtastic_AdminMessage_set_ham_mode_tag:
LOG_DEBUG("Client set ham mode");
handleSetHamMode(r->set_ham_mode);
break;
case meshtastic_AdminMessage_get_ui_config_request_tag: {
LOG_DEBUG("Client is getting device-ui config");
handleGetDeviceUIConfig(mp);
handled = true;
break;
}
/**
* Other
*/
case meshtastic_AdminMessage_reboot_seconds_tag: {
reboot(r->reboot_seconds);
break;
}
case meshtastic_AdminMessage_ota_request_tag: {
#if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
LOG_INFO("OTA Requested");
if (r->ota_request.ota_hash.size != 32) {
suppressRebootBanner = true;
sendWarningAndLog("Cannot start OTA: Invalid `ota_hash` provided.");
break;
}
meshtastic_OTAMode mode = r->ota_request.reboot_ota_mode;
const char *mode_name = (mode == METHOD_OTA_BLE ? "BLE" : "WiFi");
// Check that we have an OTA partition
const esp_partition_t *part = MeshtasticOTA::getAppPartition();
if (part == NULL) {
suppressRebootBanner = true;
sendWarningAndLog("Cannot start OTA: Cannot find OTA Loader partition.");
break;
}
static esp_app_desc_t app_desc;
if (!MeshtasticOTA::getAppDesc(part, &app_desc)) {
suppressRebootBanner = true;
sendWarningAndLog("Cannot start OTA: Device does have a valid OTA Loader.");
break;
}
if (!MeshtasticOTA::checkOTACapability(&app_desc, mode)) {
suppressRebootBanner = true;
sendWarningAndLog("OTA Loader does not support %s", mode_name);
break;
}
if (MeshtasticOTA::trySwitchToOTA()) {
suppressRebootBanner = true;
if (screen)
screen->startFirmwareUpdateScreen();
MeshtasticOTA::saveConfig(&config.network, mode, r->ota_request.ota_hash.bytes);
sendWarningAndLog("Rebooting to %s OTA", mode_name);
} else {
sendWarningAndLog("Unable to switch to the OTA partition.");
}
#endif
int s = 1; // Reboot in 1 second, hard coded
LOG_INFO("Reboot in %d seconds", s);
rebootAtMsec = (s < 0) ? 0 : (millis() + s * 1000);
break;
}
case meshtastic_AdminMessage_shutdown_seconds_tag: {
int32_t s = r->shutdown_seconds;
LOG_INFO("Shutdown in %d seconds", s);
shutdownAtMsec = (s < 0) ? 0 : (millis() + s * 1000);
break;
}
case meshtastic_AdminMessage_get_device_metadata_request_tag: {
LOG_INFO("Client got device metadata");
handleGetDeviceMetadata(mp);
break;
}
case meshtastic_AdminMessage_factory_reset_config_tag: {
disableBluetooth();
LOG_INFO("Initiate factory config reset");
nodeDB->factoryReset();
LOG_INFO("Factory config reset finished, rebooting soon");
reboot(DEFAULT_REBOOT_SECONDS);
break;
}
case meshtastic_AdminMessage_factory_reset_device_tag: {
disableBluetooth();
LOG_INFO("Initiate full factory reset");
nodeDB->factoryReset(true);
reboot(DEFAULT_REBOOT_SECONDS);
break;
}
case meshtastic_AdminMessage_nodedb_reset_tag: {
disableBluetooth();
LOG_INFO("Initiate node-db reset");
// CLIENT_BASE, ROUTER and ROUTER_LATE are able to preserve the remaining hop count when relaying a packet via a
// favorited node, so ensure that their favorites are kept on reset
bool rolePreference =
isOneOf(config.device.role, meshtastic_Config_DeviceConfig_Role_CLIENT_BASE,
meshtastic_Config_DeviceConfig_Role_ROUTER, meshtastic_Config_DeviceConfig_Role_ROUTER_LATE);
nodeDB->resetNodes(rolePreference ? rolePreference : r->nodedb_reset);
reboot(DEFAULT_REBOOT_SECONDS);
break;
}
case meshtastic_AdminMessage_store_ui_config_tag: {
LOG_INFO("Storing device-ui config");
handleStoreDeviceUIConfig(r->store_ui_config);
handled = true;
break;
}
case meshtastic_AdminMessage_begin_edit_settings_tag: {
LOG_INFO("Begin transaction for editing settings");
hasOpenEditTransaction = true;
break;
}
case meshtastic_AdminMessage_commit_edit_settings_tag: {
disableBluetooth();
LOG_INFO("Commit transaction for edited settings");
hasOpenEditTransaction = false;
saveChanges(SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS | SEGMENT_NODEDATABASE);
break;
}
case meshtastic_AdminMessage_get_device_connection_status_request_tag: {
LOG_INFO("Client got device connection status");
handleGetDeviceConnectionStatus(mp);
break;
}
case meshtastic_AdminMessage_get_module_config_response_tag: {
LOG_INFO("Client received a get_module_config response");
if (fromOthers && r->get_module_config_response.which_payload_variant ==
meshtastic_AdminMessage_ModuleConfigType_REMOTEHARDWARE_CONFIG) {
handleGetModuleConfigResponse(mp, r);
}
break;
}
case meshtastic_AdminMessage_remove_by_nodenum_tag: {
LOG_INFO("Client received remove_nodenum command");
nodeDB->removeNodeByNum(r->remove_by_nodenum);
break;
}
case meshtastic_AdminMessage_add_contact_tag: {
LOG_INFO("Client received add_contact command");
nodeDB->addFromContact(r->add_contact);
break;
}
case meshtastic_AdminMessage_set_favorite_node_tag: {
LOG_INFO("Client received set_favorite_node command");
meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->set_favorite_node);
if (node != NULL) {
nodeInfoLiteSetBit(node, NODEINFO_BITFIELD_IS_FAVORITE_MASK, true);
saveChanges(SEGMENT_NODEDATABASE, false);
if (screen)
screen->setFrames(graphics::Screen::FOCUS_PRESERVE); // <-- Rebuild screens
}
break;
}
case meshtastic_AdminMessage_remove_favorite_node_tag: {
LOG_INFO("Client received remove_favorite_node command");
meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->remove_favorite_node);
if (node != NULL) {
nodeInfoLiteSetBit(node, NODEINFO_BITFIELD_IS_FAVORITE_MASK, false);
saveChanges(SEGMENT_NODEDATABASE, false);
if (screen)
screen->setFrames(graphics::Screen::FOCUS_PRESERVE); // <-- Rebuild screens
}
break;
}
case meshtastic_AdminMessage_set_ignored_node_tag: {
LOG_INFO("Client received set_ignored_node command");
meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->set_ignored_node);
if (node != NULL) {
nodeInfoLiteSetBit(node, NODEINFO_BITFIELD_IS_IGNORED_MASK, true);
nodeDB->eraseNodeSatellites(node->num);
node->public_key.size = 0;
memset(node->public_key.bytes, 0, sizeof(node->public_key.bytes));
saveChanges(SEGMENT_NODEDATABASE, false);
}
break;
}
case meshtastic_AdminMessage_remove_ignored_node_tag: {
LOG_INFO("Client received remove_ignored_node command");
meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->remove_ignored_node);
if (node != NULL) {
nodeInfoLiteSetBit(node, NODEINFO_BITFIELD_IS_IGNORED_MASK, false);
saveChanges(SEGMENT_NODEDATABASE, false);
}
break;
}
case meshtastic_AdminMessage_toggle_muted_node_tag: {
LOG_INFO("Client received toggle_muted_node command");
meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->toggle_muted_node);
if (node != NULL) {
nodeInfoLiteSetBit(node, NODEINFO_BITFIELD_IS_MUTED_MASK, !nodeInfoLiteIsMuted(node));
saveChanges(SEGMENT_NODEDATABASE, false);
}
break;
}
case meshtastic_AdminMessage_set_fixed_position_tag: {
LOG_INFO("Client received set_fixed_position command");
const meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
// Route the fixed position through updatePosition so it lands in the
// satellite map (or, on builds with PositionDB excluded, just sets
// localPosition for the local broadcast path).
nodeDB->updatePosition(node->num, r->set_fixed_position, RX_SRC_LOCAL);
nodeDB->setLocalPosition(r->set_fixed_position);
config.position.fixed_position = true;
saveChanges(SEGMENT_NODEDATABASE | SEGMENT_CONFIG, false);
#if !MESHTASTIC_EXCLUDE_GPS
if (gps != nullptr)
gps->enable();
// Send our new fixed position to the mesh for good measure
positionModule->sendOurPosition();
#endif
break;
}
case meshtastic_AdminMessage_remove_fixed_position_tag: {
LOG_INFO("Client received remove_fixed_position command");
nodeDB->clearLocalPosition();
config.position.fixed_position = false;
saveChanges(SEGMENT_NODEDATABASE | SEGMENT_CONFIG, false);
break;
}
case meshtastic_AdminMessage_set_time_only_tag: {
LOG_INFO("Client received set_time_only command");
struct timeval tv;
tv.tv_sec = r->set_time_only;
tv.tv_usec = 0;
perhapsSetRTC(RTCQualityNTP, &tv, false);
break;
}
case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
LOG_INFO("Client requesting to enter DFU mode");
#if HAS_SCREEN
IF_SCREEN(screen->showSimpleBanner("Device is rebooting\ninto DFU mode.", 0));
#endif
#if defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)
enterDfuMode();
#endif
break;
}
case meshtastic_AdminMessage_delete_file_request_tag: {
LOG_DEBUG("Client requesting to delete file: %s", r->delete_file_request);
#ifdef FSCom
spiLock->lock();
if (FSCom.remove(r->delete_file_request)) {
LOG_DEBUG("Successfully deleted file");
} else {
LOG_DEBUG("Failed to delete file");
}
spiLock->unlock();
#endif
break;
}
case meshtastic_AdminMessage_backup_preferences_tag: {
LOG_INFO("Client requesting to backup preferences");
if (nodeDB->backupPreferences(r->backup_preferences)) {
myReply = allocErrorResponse(meshtastic_Routing_Error_NONE, &mp);
} else {
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
}
break;
}
case meshtastic_AdminMessage_restore_preferences_tag: {
LOG_INFO("Client requesting to restore preferences");
if (nodeDB->restorePreferences(r->backup_preferences,
SEGMENT_DEVICESTATE | SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_CHANNELS)) {
myReply = allocErrorResponse(meshtastic_Routing_Error_NONE, &mp);
LOG_DEBUG("Rebooting after successful restore of preferences");
reboot(1000);
disableBluetooth();
} else {
myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
}
break;
}
case meshtastic_AdminMessage_remove_backup_preferences_tag: {
LOG_INFO("Client requesting to remove backup preferences");
#ifdef FSCom
if (r->remove_backup_preferences == meshtastic_AdminMessage_BackupLocation_FLASH) {
spiLock->lock();
FSCom.remove(backupFileName);
spiLock->unlock();
} else if (r->remove_backup_preferences == meshtastic_AdminMessage_BackupLocation_SD) {
// TODO: After more mainline SD card support
LOG_ERROR("SD backup removal not implemented yet");
}
#endif
break;
}
case meshtastic_AdminMessage_send_input_event_tag: {
LOG_INFO("Client requesting to send input event");
handleSendInputEvent(r->send_input_event);
break;
}
#ifdef ARCH_PORTDUINO
case meshtastic_AdminMessage_exit_simulator_tag:
LOG_INFO("Exiting simulator");
exit(0);
break;
#endif
default:
meshtastic_AdminMessage res = meshtastic_AdminMessage_init_default;
AdminMessageHandleResult handleResult = MeshModule::handleAdminMessageForAllModules(mp, r, &res);
if (handleResult == AdminMessageHandleResult::HANDLED_WITH_RESPONSE) {
setPassKey(&res);
myReply = allocDataProtobuf(res);
} else if (mp.decoded.want_response) {
LOG_DEBUG("Module API did not respond to admin message. req.variant=%d", r->which_payload_variant);
} else if (handleResult != AdminMessageHandleResult::HANDLED) {
// Probably a message sent by us or sent to our local node. FIXME, we should avoid scanning these messages
LOG_DEBUG("Module API did not handle admin message %d", r->which_payload_variant);
}
break;
}
// Allow any observers (e.g. the UI) to handle/respond
AdminMessageHandleResult observerResult = AdminMessageHandleResult::NOT_HANDLED;
meshtastic_AdminMessage observerResponse = meshtastic_AdminMessage_init_default;
AdminModule_ObserverData observerData = {
.request = r,
.response = &observerResponse,
.result = &observerResult,
};
notifyObservers(&observerData);
if (observerResult == AdminMessageHandleResult::HANDLED_WITH_RESPONSE) {
setPassKey(&observerResponse);
myReply = allocDataProtobuf(observerResponse);
LOG_DEBUG("Observer responded to admin message");
} else if (observerResult == AdminMessageHandleResult::HANDLED) {
LOG_DEBUG("Observer handled admin message");
}
// If asked for a response and it is not yet set, generate an 'ACK' response
if (mp.decoded.want_response && !myReply) {
myReply = allocErrorResponse(meshtastic_Routing_Error_NONE, &mp);
}
if (mp.pki_encrypted && myReply) {
myReply->pki_encrypted = true;
}
return handled;
}
void AdminModule::handleGetModuleConfigResponse(const meshtastic_MeshPacket &mp, meshtastic_AdminMessage *r)
{
// Skip if it's disabled or no pins are exposed
if (!r->get_module_config_response.payload_variant.remote_hardware.enabled ||
r->get_module_config_response.payload_variant.remote_hardware.available_pins_count == 0) {
LOG_DEBUG("Remote hardware module disabled or no available_pins. Skip");
return;
}
for (uint8_t i = 0; i < devicestate.node_remote_hardware_pins_count; i++) {
if (devicestate.node_remote_hardware_pins[i].node_num == 0 || !devicestate.node_remote_hardware_pins[i].has_pin) {
continue;
}
for (uint8_t j = 0; j < r->get_module_config_response.payload_variant.remote_hardware.available_pins_count; j++) {
auto availablePin = r->get_module_config_response.payload_variant.remote_hardware.available_pins[j];
if (i < devicestate.node_remote_hardware_pins_count) {
devicestate.node_remote_hardware_pins[i].node_num = mp.from;
devicestate.node_remote_hardware_pins[i].pin = availablePin;
}
i++;
}
}
}
/**
* Setter methods
*/
void AdminModule::handleSetOwner(const meshtastic_User &o)
{
int changed = 0;
if (*o.long_name) {
changed |= strcmp(owner.long_name, o.long_name);
strncpy(owner.long_name, o.long_name, sizeof(owner.long_name));
owner.long_name[sizeof(owner.long_name) - 1] = '\0';
sanitizeUtf8(owner.long_name, sizeof(owner.long_name));
}
if (*o.short_name) {
changed |= strcmp(owner.short_name, o.short_name);
strncpy(owner.short_name, o.short_name, sizeof(owner.short_name));
owner.short_name[sizeof(owner.short_name) - 1] = '\0';
sanitizeUtf8(owner.short_name, sizeof(owner.short_name));
}
snprintf(owner.id, sizeof(owner.id), "!%08x", nodeDB->getNodeNum());
if (owner.is_licensed != o.is_licensed) {
changed = 1;
owner.is_licensed = o.is_licensed;
if (channels.ensureLicensedOperation()) {
sendWarning(licensedModeMessage);
}
}
if (owner.has_is_unmessagable != o.has_is_unmessagable ||
(o.has_is_unmessagable && owner.is_unmessagable != o.is_unmessagable)) {
changed = 1;
owner.has_is_unmessagable = owner.has_is_unmessagable || o.has_is_unmessagable;
owner.is_unmessagable = o.is_unmessagable;
}
if (changed) { // If nothing really changed, don't broadcast on the network or write to flash
service->reloadOwner(!hasOpenEditTransaction);
saveChanges(SEGMENT_DEVICESTATE | SEGMENT_NODEDATABASE);
}
}
void AdminModule::handleSetConfig(const meshtastic_Config &c, bool fromOthers)
{
auto changes = SEGMENT_CONFIG;
auto existingRole = config.device.role;
bool isRegionUnset = (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET);
bool requiresReboot = true;
switch (c.which_payload_variant) {
case meshtastic_Config_device_tag: {
LOG_INFO("Set config: Device");
config.has_device = true;
#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && \
!MESHTASTIC_EXCLUDE_ACCELEROMETER
if (config.device.double_tap_as_button_press == false && c.payload_variant.device.double_tap_as_button_press == true &&
accelerometerThread->enabled == false) {
config.device.double_tap_as_button_press = c.payload_variant.device.double_tap_as_button_press;
accelerometerThread->enabled = true;
accelerometerThread->start();
}
#endif
if (config.device.button_gpio == c.payload_variant.device.button_gpio &&
config.device.buzzer_gpio == c.payload_variant.device.buzzer_gpio &&
config.device.role == c.payload_variant.device.role &&
config.device.rebroadcast_mode == c.payload_variant.device.rebroadcast_mode) {
requiresReboot = false;
}
config.device = c.payload_variant.device;
if (config.device.rebroadcast_mode == meshtastic_Config_DeviceConfig_RebroadcastMode_NONE &&
(config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE)) {
config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_ALL;
const char *warning = "Rebroadcast mode can't be set to NONE for a router role";
LOG_WARN(warning);
sendWarning(warning);
}
// If we're setting router role for the first time, install its intervals
if (existingRole != c.payload_variant.device.role) {
nodeDB->installRoleDefaults(c.payload_variant.device.role);
changes |= SEGMENT_NODEDATABASE | SEGMENT_DEVICESTATE; // Some role defaults affect owner
}
if (config.device.node_info_broadcast_secs < min_node_info_broadcast_secs) {
LOG_DEBUG("Tried to set node_info_broadcast_secs too low, setting to %d", min_node_info_broadcast_secs);
config.device.node_info_broadcast_secs = min_node_info_broadcast_secs;
}
// Router Client and Repeater deprecated; Set it to client
if (IS_ONE_OF(c.payload_variant.device.role, meshtastic_Config_DeviceConfig_Role_ROUTER_CLIENT,
meshtastic_Config_DeviceConfig_Role_REPEATER)) {
config.device.role = meshtastic_Config_DeviceConfig_Role_CLIENT;
if (moduleConfig.store_forward.enabled && !moduleConfig.store_forward.is_server) {
moduleConfig.store_forward.is_server = true;
changes |= SEGMENT_MODULECONFIG;
requiresReboot = true;
}
}
#if USERPREFS_EVENT_MODE
// If we're in event mode, nobody is a Router or Router Late
if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER ||
config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE) {
config.device.role = meshtastic_Config_DeviceConfig_Role_CLIENT;
}
#endif
break;
} // case meshtastic_Config_device_tag
case meshtastic_Config_position_tag:
LOG_INFO("Set config: Position");
config.has_position = true;
// If we have turned off the GPS (disabled or not present) and we're not using fixed position,
// clear the stored position since it may not get updated
if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED &&
c.payload_variant.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED &&
config.position.fixed_position == false && c.payload_variant.position.fixed_position == false) {
nodeDB->clearLocalPosition();
saveChanges(SEGMENT_NODEDATABASE | SEGMENT_CONFIG, false);
}
config.position = c.payload_variant.position;
// Save nodedb as well in case we got a fixed position packet
break;
case meshtastic_Config_power_tag:
LOG_INFO("Set config: Power");
config.has_power = true;
// Really just the adc override is the only thing that can change without a reboot
if (config.power.device_battery_ina_address == c.payload_variant.power.device_battery_ina_address &&
config.power.is_power_saving == c.payload_variant.power.is_power_saving &&
config.power.ls_secs == c.payload_variant.power.ls_secs &&
config.power.min_wake_secs == c.payload_variant.power.min_wake_secs &&
config.power.on_battery_shutdown_after_secs == c.payload_variant.power.on_battery_shutdown_after_secs &&
config.power.sds_secs == c.payload_variant.power.sds_secs &&
config.power.wait_bluetooth_secs == c.payload_variant.power.wait_bluetooth_secs) {
requiresReboot = false;
}
config.power = c.payload_variant.power;
if (c.payload_variant.power.on_battery_shutdown_after_secs > 0 &&
c.payload_variant.power.on_battery_shutdown_after_secs < 30) {
LOG_WARN("Tried to set on_battery_shutdown_after_secs too low, set to min 30 seconds");
config.power.on_battery_shutdown_after_secs = 30;
}
break;
case meshtastic_Config_network_tag:
LOG_INFO("Set config: WiFi");
config.has_network = true;
config.network = c.payload_variant.network;
break;
case meshtastic_Config_display_tag:
LOG_INFO("Set config: Display");
config.has_display = true;
if (config.display.screen_on_secs == c.payload_variant.display.screen_on_secs &&
config.display.flip_screen == c.payload_variant.display.flip_screen &&
config.display.oled == c.payload_variant.display.oled &&
config.display.displaymode == c.payload_variant.display.displaymode) {
requiresReboot = false;
} else if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR &&
c.payload_variant.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
config.bluetooth.enabled = false;
}
#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && \
!MESHTASTIC_EXCLUDE_ACCELEROMETER
if (config.display.wake_on_tap_or_motion == false && c.payload_variant.display.wake_on_tap_or_motion == true &&
accelerometerThread->enabled == false) {
config.display.wake_on_tap_or_motion = c.payload_variant.display.wake_on_tap_or_motion;
accelerometerThread->enabled = true;
accelerometerThread->start();
}
#endif
config.display = c.payload_variant.display;
break;
case meshtastic_Config_lora_tag: {
// Wrap the entire case in a block to scope variables and avoid crossing initialization
auto oldLoraConfig = config.lora;
auto validatedLora = c.payload_variant.lora;
LOG_INFO("Set config: LoRa");
config.has_lora = true;
if (validatedLora.coding_rate != clampCodingRate(validatedLora.coding_rate)) {
LOG_WARN("Invalid coding_rate %d, setting to %d", validatedLora.coding_rate, LORA_CR_DEFAULT);
validatedLora.coding_rate = LORA_CR_DEFAULT;
}
if (validatedLora.spread_factor != clampSpreadFactor(validatedLora.spread_factor)) {
LOG_WARN("Invalid spread_factor %d, setting to %d", validatedLora.spread_factor, LORA_SF_DEFAULT);
validatedLora.spread_factor = LORA_SF_DEFAULT;
}
// If we're setting a new region, check the region is valid and then init the region or discard the change
if (validatedLora.region != myRegion->code) {
// Region has changed so check whether it is valid for e.g. licensing conditions and if the lora config is valid
if (RadioInterface::validateConfigRegion(validatedLora) && RadioInterface::validateConfigLora(validatedLora)) {
// If we're setting region for the first time, init the region and regenerate the keys
if (isRegionUnset && validatedLora.region > meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI)
if (crypto) {
crypto->ensurePkiKeys(config.security, owner);
}
#endif
// new region is valid and we're coming from an unset region, so enable tx
validatedLora.tx_enabled = true;
}
// If we're unsetting the region for some reason, disable tx
if (!isRegionUnset && validatedLora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
validatedLora.tx_enabled = false;
}
// Ensure initRegion() uses the newly validated region
config.lora.region = validatedLora.region;
initRegion();
if (getEffectiveDutyCycle() < 100) {
validatedLora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
}
if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
// Default root is in use, so subscribe to the appropriate MQTT topic for this region
sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
}
changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
} else {
// Region validation has failed, so just copy all of the old config over the new config
validatedLora = oldLoraConfig;
}
} // end of new region handling
if (!RadioInterface::validateConfigLora(validatedLora)) {
if (fromOthers) {
LOG_WARN("Invalid LoRa config received from another node, rejecting changes");
// modem_preset set to use the old setting if the check fails
validatedLora.modem_preset = oldLoraConfig.modem_preset;
} else {
LOG_WARN("Invalid LoRa config received from client, using corrected values");
RadioInterface::clampConfigLora(validatedLora);
}
// use_preset and bandwidth are coerced into valid values by the check.
}
// All LoRa radio changes apply live via configChanged observer → reconfigure().
// reconfigure() puts the radio in standby, reprograms all modem parameters, and restarts receive.
requiresReboot = false;
#if defined(ARCH_PORTDUINO)
// If running on portduino and using SimRadio, do not require reboot
if (SimRadio::instance) {
requiresReboot = false;
}
#endif
#ifdef RF95_FAN_EN
// Turn PA off if disabled by config
if (c.payload_variant.lora.pa_fan_disabled) {
digitalWrite(RF95_FAN_EN, LOW ^ 0);
} else {
digitalWrite(RF95_FAN_EN, HIGH ^ 0);
}
#endif
#if HAS_LORA_FEM
// Apply FEM LNA mode from config (only meaningful on hardware that supports it)
// Note that a rejected lora config will revert this as well.
if (loraFEMInterface.isLnaCanControl()) {
loraFEMInterface.setLNAEnable(validatedLora.fem_lna_mode != meshtastic_Config_LoRaConfig_FEM_LNA_Mode_DISABLED);
} else if (validatedLora.fem_lna_mode != meshtastic_Config_LoRaConfig_FEM_LNA_Mode_NOT_PRESENT) {
// Hardware FEM does not support LNA control; normalize stored config to match actual capability
LOG_WARN("FEM LNA mode configured but current FEM does not support LNA control; normalizing to NOT_PRESENT");
validatedLora.fem_lna_mode = meshtastic_Config_LoRaConfig_FEM_LNA_Mode_NOT_PRESENT;
}
#endif
config.lora = validatedLora; // Finally, return the validated config back to the main config
break;
}
case meshtastic_Config_bluetooth_tag:
LOG_INFO("Set config: Bluetooth");
config.has_bluetooth = true;
config.bluetooth = c.payload_variant.bluetooth;
break;
case meshtastic_Config_security_tag:
LOG_INFO("Set config: Security");
config.security = c.payload_variant.security;
#if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN) && !(MESHTASTIC_EXCLUDE_PKI)
// If the client set the key to blank, go ahead and regenerate so long as we're not in ham mode
if (!owner.is_licensed && config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_UNSET) {
if (config.security.private_key.size != 32) {
crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
} else {
if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
config.security.public_key.size = 32;
}
}
}
#endif
owner.public_key.size = config.security.public_key.size;
memcpy(owner.public_key.bytes, config.security.public_key.bytes, config.security.public_key.size);
#if !MESHTASTIC_EXCLUDE_PKI
crypto->setDHPrivateKey(config.security.private_key.bytes);
#endif
if (config.security.is_managed && !(config.security.admin_key[0].size == 32 || config.security.admin_key[1].size == 32 ||
config.security.admin_key[2].size == 32)) {
config.security.is_managed = false;
const char *warning = "You must provide at least one admin public key to enable managed mode";
LOG_WARN(warning);
sendWarning(warning);
}
if (config.security.debug_log_api_enabled == c.payload_variant.security.debug_log_api_enabled &&
config.security.serial_enabled == c.payload_variant.security.serial_enabled)
requiresReboot = false;
break;
case meshtastic_Config_device_ui_tag:
// NOOP! This is handled by handleStoreDeviceUIConfig
break;
}
if (requiresReboot && !hasOpenEditTransaction) {
disableBluetooth();
} // end of switch case which_payload_variant
saveChanges(changes, requiresReboot);
} // end of handleSetConfig
bool AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
{
bool shouldReboot = true;
// If we are in an open transaction or configuring MQTT or Serial (which have validation), defer disabling Bluetooth
// Otherwise, disable Bluetooth to prevent the phone from interfering with the config
if (!hasOpenEditTransaction && !IS_ONE_OF(c.which_payload_variant, meshtastic_ModuleConfig_mqtt_tag,
meshtastic_ModuleConfig_serial_tag, meshtastic_ModuleConfig_statusmessage_tag)) {
disableBluetooth();
}
switch (c.which_payload_variant) {
case meshtastic_ModuleConfig_mqtt_tag:
#if MESHTASTIC_EXCLUDE_MQTT
LOG_WARN("Set module config: MESHTASTIC_EXCLUDE_MQTT is defined. Not setting MQTT config");
return false;
#else
LOG_INFO("Set module config: MQTT");
if (!MQTT::isValidConfig(c.payload_variant.mqtt)) {
return false;
}
// Disable Bluetooth to prevent interference during MQTT configuration
disableBluetooth();
moduleConfig.has_mqtt = true;
moduleConfig.mqtt = c.payload_variant.mqtt;
#endif
break;
case meshtastic_ModuleConfig_serial_tag:
LOG_INFO("Set module config: Serial");
#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) && \
!defined(CONFIG_IDF_TARGET_ESP32C3)
if (!SerialModule::isValidConfig(c.payload_variant.serial)) {
LOG_ERROR("Invalid serial config");
return false;
}
disableBluetooth(); // Disable Bluetooth to prevent interference during Serial configuration
#endif
moduleConfig.has_serial = true;
moduleConfig.serial = c.payload_variant.serial;
break;
case meshtastic_ModuleConfig_external_notification_tag:
LOG_INFO("Set module config: External Notification");
moduleConfig.has_external_notification = true;
moduleConfig.external_notification = c.payload_variant.external_notification;
break;
case meshtastic_ModuleConfig_store_forward_tag:
LOG_INFO("Set module config: Store & Forward");
moduleConfig.has_store_forward = true;
moduleConfig.store_forward = c.payload_variant.store_forward;
break;
case meshtastic_ModuleConfig_range_test_tag:
LOG_INFO("Set module config: Range Test");
moduleConfig.has_range_test = true;
moduleConfig.range_test = c.payload_variant.range_test;
break;
case meshtastic_ModuleConfig_telemetry_tag:
LOG_INFO("Set module config: Telemetry");
moduleConfig.has_telemetry = true;
moduleConfig.telemetry = c.payload_variant.telemetry;
break;
case meshtastic_ModuleConfig_canned_message_tag:
LOG_INFO("Set module config: Canned Message");
moduleConfig.has_canned_message = true;
moduleConfig.canned_message = c.payload_variant.canned_message;
break;
case meshtastic_ModuleConfig_audio_tag:
LOG_INFO("Set module config: Audio");
moduleConfig.has_audio = true;
moduleConfig.audio = c.payload_variant.audio;
break;
case meshtastic_ModuleConfig_remote_hardware_tag:
LOG_INFO("Set module config: Remote Hardware");
moduleConfig.has_remote_hardware = true;
moduleConfig.remote_hardware = c.payload_variant.remote_hardware;
break;
case meshtastic_ModuleConfig_neighbor_info_tag:
LOG_INFO("Set module config: Neighbor Info");
moduleConfig.has_neighbor_info = true;
moduleConfig.neighbor_info = c.payload_variant.neighbor_info;
if (moduleConfig.neighbor_info.update_interval < min_neighbor_info_broadcast_secs) {
LOG_DEBUG("Tried to set update_interval too low, setting to %d", default_neighbor_info_broadcast_secs);
moduleConfig.neighbor_info.update_interval = default_neighbor_info_broadcast_secs;
}
break;
case meshtastic_ModuleConfig_detection_sensor_tag:
LOG_INFO("Set module config: Detection Sensor");
moduleConfig.has_detection_sensor = true;
moduleConfig.detection_sensor = c.payload_variant.detection_sensor;
break;
case meshtastic_ModuleConfig_ambient_lighting_tag:
LOG_INFO("Set module config: Ambient Lighting");
moduleConfig.has_ambient_lighting = true;
moduleConfig.ambient_lighting = c.payload_variant.ambient_lighting;
break;
case meshtastic_ModuleConfig_paxcounter_tag:
LOG_INFO("Set module config: Paxcounter");
moduleConfig.has_paxcounter = true;
moduleConfig.paxcounter = c.payload_variant.paxcounter;
break;
case meshtastic_ModuleConfig_statusmessage_tag:
LOG_INFO("Set module config: StatusMessage");
moduleConfig.has_statusmessage = true;
moduleConfig.statusmessage = c.payload_variant.statusmessage;
shouldReboot = false;
break;
case meshtastic_ModuleConfig_traffic_management_tag:
LOG_INFO("Set module config: Traffic Management");
moduleConfig.has_traffic_management = true;
moduleConfig.traffic_management = c.payload_variant.traffic_management;
break;
}
saveChanges(SEGMENT_MODULECONFIG, shouldReboot);
return true;
}
void AdminModule::handleSetChannel(const meshtastic_Channel &cc)
{
channels.setChannel(cc);
if (channels.ensureLicensedOperation()) {
sendWarning(licensedModeMessage);
}
channels.onConfigChanged(); // tell the radios about this change
saveChanges(SEGMENT_CHANNELS, false);
}
/**
* Getters
*/
void AdminModule::handleGetOwner(const meshtastic_MeshPacket &req)
{
if (req.decoded.want_response) {
// We create the reply here
meshtastic_AdminMessage res = meshtastic_AdminMessage_init_default;
res.get_owner_response = owner;
res.which_payload_variant = meshtastic_AdminMessage_get_owner_response_tag;
setPassKey(&res);
myReply = allocDataProtobuf(res);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
}
void AdminModule::handleGetConfig(const meshtastic_MeshPacket &req, const uint32_t configType)
{
meshtastic_AdminMessage res = meshtastic_AdminMessage_init_default;
if (req.decoded.want_response) {
switch (configType) {
case meshtastic_AdminMessage_ConfigType_DEVICE_CONFIG:
LOG_INFO("Get config: Device");
res.get_config_response.which_payload_variant = meshtastic_Config_device_tag;
res.get_config_response.payload_variant.device = config.device;
break;
case meshtastic_AdminMessage_ConfigType_POSITION_CONFIG:
LOG_INFO("Get config: Position");
res.get_config_response.which_payload_variant = meshtastic_Config_position_tag;
res.get_config_response.payload_variant.position = config.position;
break;
case meshtastic_AdminMessage_ConfigType_POWER_CONFIG:
LOG_INFO("Get config: Power");
res.get_config_response.which_payload_variant = meshtastic_Config_power_tag;
res.get_config_response.payload_variant.power = config.power;
break;
case meshtastic_AdminMessage_ConfigType_NETWORK_CONFIG:
LOG_INFO("Get config: Network");
res.get_config_response.which_payload_variant = meshtastic_Config_network_tag;
res.get_config_response.payload_variant.network = config.network;
writeSecret(res.get_config_response.payload_variant.network.wifi_psk,
sizeof(res.get_config_response.payload_variant.network.wifi_psk), config.network.wifi_psk);
break;
case meshtastic_AdminMessage_ConfigType_DISPLAY_CONFIG:
LOG_INFO("Get config: Display");
res.get_config_response.which_payload_variant = meshtastic_Config_display_tag;
res.get_config_response.payload_variant.display = config.display;
break;
case meshtastic_AdminMessage_ConfigType_LORA_CONFIG:
LOG_INFO("Get config: LoRa");
res.get_config_response.which_payload_variant = meshtastic_Config_lora_tag;
res.get_config_response.payload_variant.lora = config.lora;
break;
case meshtastic_AdminMessage_ConfigType_BLUETOOTH_CONFIG:
LOG_INFO("Get config: Bluetooth");
res.get_config_response.which_payload_variant = meshtastic_Config_bluetooth_tag;
res.get_config_response.payload_variant.bluetooth = config.bluetooth;
break;
case meshtastic_AdminMessage_ConfigType_SECURITY_CONFIG:
LOG_INFO("Get config: Security");
res.get_config_response.which_payload_variant = meshtastic_Config_security_tag;
res.get_config_response.payload_variant.security = config.security;
break;
case meshtastic_AdminMessage_ConfigType_SESSIONKEY_CONFIG:
LOG_INFO("Get config: Sessionkey");
res.get_config_response.which_payload_variant = meshtastic_Config_sessionkey_tag;
break;
case meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG:
// NOOP! This is handled by handleGetDeviceUIConfig
res.get_config_response.which_payload_variant = meshtastic_Config_device_ui_tag;
break;
}
// NOTE: The phone app needs to know the ls_secs value so it can properly expect sleep behavior.
// So even if we internally use 0 to represent 'use default' we still need to send the value we are
// using to the app (so that even old phone apps work with new device loads).
// r.get_radio_response.preferences.ls_secs = getPref_ls_secs();
// hideSecret(r.get_radio_response.preferences.wifi_ssid); // hmm - leave public for now, because only minimally
// private and useful for users to know current provisioning)
// hideSecret(r.get_radio_response.preferences.wifi_password); r.get_config_response.which_payloadVariant =
// Config_ModuleConfig_telemetry_tag;
res.which_payload_variant = meshtastic_AdminMessage_get_config_response_tag;
setPassKey(&res);
myReply = allocDataProtobuf(res);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
}
void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const uint32_t configType)
{
meshtastic_AdminMessage res = meshtastic_AdminMessage_init_default;
if (req.decoded.want_response) {
const char *configName = "?";
switch (configType) {
case meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG:
configName = "MQTT";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_mqtt_tag;
res.get_module_config_response.payload_variant.mqtt = moduleConfig.mqtt;
break;
case meshtastic_AdminMessage_ModuleConfigType_SERIAL_CONFIG:
configName = "Serial";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_serial_tag;
res.get_module_config_response.payload_variant.serial = moduleConfig.serial;
break;
case meshtastic_AdminMessage_ModuleConfigType_EXTNOTIF_CONFIG:
configName = "External Notification";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_external_notification_tag;
res.get_module_config_response.payload_variant.external_notification = moduleConfig.external_notification;
break;
case meshtastic_AdminMessage_ModuleConfigType_STOREFORWARD_CONFIG:
configName = "Store & Forward";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_store_forward_tag;
res.get_module_config_response.payload_variant.store_forward = moduleConfig.store_forward;
break;
case meshtastic_AdminMessage_ModuleConfigType_RANGETEST_CONFIG:
configName = "Range Test";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_range_test_tag;
res.get_module_config_response.payload_variant.range_test = moduleConfig.range_test;
break;
case meshtastic_AdminMessage_ModuleConfigType_TELEMETRY_CONFIG:
configName = "Telemetry";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_telemetry_tag;
res.get_module_config_response.payload_variant.telemetry = moduleConfig.telemetry;
break;
case meshtastic_AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG:
configName = "Canned Message";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_canned_message_tag;
res.get_module_config_response.payload_variant.canned_message = moduleConfig.canned_message;
break;
case meshtastic_AdminMessage_ModuleConfigType_AUDIO_CONFIG:
configName = "Audio";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_audio_tag;
res.get_module_config_response.payload_variant.audio = moduleConfig.audio;
break;
case meshtastic_AdminMessage_ModuleConfigType_REMOTEHARDWARE_CONFIG:
configName = "Remote Hardware";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_remote_hardware_tag;
res.get_module_config_response.payload_variant.remote_hardware = moduleConfig.remote_hardware;
break;
case meshtastic_AdminMessage_ModuleConfigType_NEIGHBORINFO_CONFIG:
configName = "Neighbor Info";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_neighbor_info_tag;
res.get_module_config_response.payload_variant.neighbor_info = moduleConfig.neighbor_info;
break;
case meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG:
configName = "Detection Sensor";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_detection_sensor_tag;
res.get_module_config_response.payload_variant.detection_sensor = moduleConfig.detection_sensor;
break;
case meshtastic_AdminMessage_ModuleConfigType_AMBIENTLIGHTING_CONFIG:
configName = "Ambient Lighting";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_ambient_lighting_tag;
res.get_module_config_response.payload_variant.ambient_lighting = moduleConfig.ambient_lighting;
break;
case meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG:
configName = "Paxcounter";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
res.get_module_config_response.payload_variant.paxcounter = moduleConfig.paxcounter;
break;
case meshtastic_AdminMessage_ModuleConfigType_STATUSMESSAGE_CONFIG:
configName = "StatusMessage";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_statusmessage_tag;
res.get_module_config_response.payload_variant.statusmessage = moduleConfig.statusmessage;
break;
case meshtastic_AdminMessage_ModuleConfigType_TRAFFICMANAGEMENT_CONFIG:
configName = "Traffic Management";
res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_traffic_management_tag;
res.get_module_config_response.payload_variant.traffic_management = moduleConfig.traffic_management;
break;
}
LOG_INFO("Get module config: %s", configName);
// NOTE: The phone app needs to know the ls_secsvalue so it can properly expect sleep behavior.
// So even if we internally use 0 to represent 'use default' we still need to send the value we are
// using to the app (so that even old phone apps work with new device loads).
// r.get_radio_response.preferences.ls_secs = getPref_ls_secs();
// hideSecret(r.get_radio_response.preferences.wifi_ssid); // hmm - leave public for now, because only minimally
// private and useful for users to know current provisioning)
// hideSecret(r.get_radio_response.preferences.wifi_password); r.get_config_response.which_payloadVariant =
// Config_ModuleConfig_telemetry_tag;
res.which_payload_variant = meshtastic_AdminMessage_get_module_config_response_tag;
setPassKey(&res);
myReply = allocDataProtobuf(res);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
}
void AdminModule::handleGetNodeRemoteHardwarePins(const meshtastic_MeshPacket &req)
{
meshtastic_AdminMessage r = meshtastic_AdminMessage_init_default;
r.which_payload_variant = meshtastic_AdminMessage_get_node_remote_hardware_pins_response_tag;
for (uint8_t i = 0; i < devicestate.node_remote_hardware_pins_count; i++) {
if (devicestate.node_remote_hardware_pins[i].node_num == 0 || !devicestate.node_remote_hardware_pins[i].has_pin) {
continue;
}
r.get_node_remote_hardware_pins_response.node_remote_hardware_pins[i] = devicestate.node_remote_hardware_pins[i];
}
for (uint8_t i = 0; i < moduleConfig.remote_hardware.available_pins_count; i++) {
if (!moduleConfig.remote_hardware.available_pins[i].gpio_pin) {
continue;
}
meshtastic_NodeRemoteHardwarePin nodePin = meshtastic_NodeRemoteHardwarePin_init_default;
nodePin.node_num = nodeDB->getNodeNum();
nodePin.pin = moduleConfig.remote_hardware.available_pins[i];
r.get_node_remote_hardware_pins_response.node_remote_hardware_pins[i + 12] = nodePin;
}
setPassKey(&r);
myReply = allocDataProtobuf(r);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
void AdminModule::handleGetDeviceMetadata(const meshtastic_MeshPacket &req)
{
meshtastic_AdminMessage r = meshtastic_AdminMessage_init_default;
r.get_device_metadata_response = getDeviceMetadata();
r.which_payload_variant = meshtastic_AdminMessage_get_device_metadata_response_tag;
setPassKey(&r);
myReply = allocDataProtobuf(r);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &req)
{
meshtastic_AdminMessage r = meshtastic_AdminMessage_init_default;
meshtastic_DeviceConnectionStatus conn = meshtastic_DeviceConnectionStatus_init_zero;
#if HAS_WIFI
conn.has_wifi = true;
conn.wifi.has_status = true;
#ifdef ARCH_PORTDUINO
conn.wifi.status.is_connected = true;
#else
conn.wifi.status.is_connected = WiFi.status() == WL_CONNECTED;
#endif
strncpy(conn.wifi.ssid, config.network.wifi_ssid, 33);
if (conn.wifi.status.is_connected) {
conn.wifi.rssi = WiFi.RSSI();
conn.wifi.status.ip_address = WiFi.localIP();
#ifndef MESHTASTIC_EXCLUDE_MQTT
conn.wifi.status.is_mqtt_connected = mqtt && mqtt->isConnectedDirectly();
#endif
conn.wifi.status.is_syslog_connected = false; // FIXME wire this up
}
#endif
#if HAS_ETHERNET && !defined(USE_WS5500) && !defined(USE_CH390D)
conn.has_ethernet = true;
conn.ethernet.has_status = true;
if (Ethernet.linkStatus() == LinkON) {
conn.ethernet.status.is_connected = true;
conn.ethernet.status.ip_address = Ethernet.localIP();
#if !MESHTASTIC_EXCLUDE_MQTT
conn.ethernet.status.is_mqtt_connected = mqtt && mqtt->isConnectedDirectly();
#endif
conn.ethernet.status.is_syslog_connected = false; // FIXME wire this up
} else {
conn.ethernet.status.is_connected = false;
}
#endif
#if HAS_BLUETOOTH
conn.has_bluetooth = true;
conn.bluetooth.pin = config.bluetooth.fixed_pin;
#ifdef ARCH_ESP32
if (config.bluetooth.enabled && nimbleBluetooth) {
conn.bluetooth.is_connected = nimbleBluetooth->isConnected();
conn.bluetooth.rssi = nimbleBluetooth->getRssi();
}
#elif defined(ARCH_NRF52)
if (config.bluetooth.enabled && nrf52Bluetooth) {
conn.bluetooth.is_connected = nrf52Bluetooth->isConnected();
}
#elif defined(ARCH_NRF54L15)
if (config.bluetooth.enabled && nrf54l15Bluetooth) {
conn.bluetooth.is_connected = nrf54l15Bluetooth->isConnected();
}
#endif
#endif
conn.has_serial = true; // No serial-less devices
#if !MESHTASTIC_EXCLUDE_POWER_FSM
conn.serial.is_connected = powerFSM.getState() == &stateSERIAL;
#else
conn.serial.is_connected = powerFSM.getState();
#endif
conn.serial.baud = SERIAL_BAUD;
r.get_device_connection_status_response = conn;
r.which_payload_variant = meshtastic_AdminMessage_get_device_connection_status_response_tag;
setPassKey(&r);
myReply = allocDataProtobuf(r);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
void AdminModule::handleGetChannel(const meshtastic_MeshPacket &req, uint32_t channelIndex)
{
if (req.decoded.want_response) {
// We create the reply here
meshtastic_AdminMessage r = meshtastic_AdminMessage_init_default;
r.get_channel_response = channels.getByIndex(channelIndex);
r.which_payload_variant = meshtastic_AdminMessage_get_channel_response_tag;
setPassKey(&r);
myReply = allocDataProtobuf(r);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
}
void AdminModule::handleGetDeviceUIConfig(const meshtastic_MeshPacket &req)
{
meshtastic_AdminMessage r = meshtastic_AdminMessage_init_default;
r.which_payload_variant = meshtastic_AdminMessage_get_ui_config_response_tag;
r.get_ui_config_response = uiconfig;
myReply = allocDataProtobuf(r);
if (req.pki_encrypted) {
myReply->pki_encrypted = true;
}
}
void AdminModule::reboot(int32_t seconds)
{
LOG_INFO("Reboot in %d seconds", seconds);
if (screen)
screen->showSimpleBanner("Rebooting...", 0); // stays on screen
rebootAtMsec = (seconds < 0) ? 0 : (millis() + seconds * 1000);
}
void AdminModule::saveChanges(int saveWhat, bool shouldReboot)
{
if (!hasOpenEditTransaction) {
LOG_INFO("Save changes to disk");
service->reloadConfig(saveWhat); // Calls saveToDisk among other things
} else {
LOG_INFO("Delay save of changes to disk until the open transaction is committed");
}
if (shouldReboot && !hasOpenEditTransaction) {
reboot(DEFAULT_REBOOT_SECONDS);
}
}
void AdminModule::handleStoreDeviceUIConfig(const meshtastic_DeviceUIConfig &uicfg)
{
#if HAS_SCREEN
nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uicfg);
#endif
}
void AdminModule::handleSetHamMode(const meshtastic_HamParameters &p)
{
// Validate ham parameters before setting since this would bypass validation in the owner struct
const char *fieldsToCheck[] = {p.call_sign, p.short_name};
const char *fieldNames[] = {"call_sign", "short_name"};
for (int i = 0; i < 2; i++) {
if (*fieldsToCheck[i]) {
const char *start = fieldsToCheck[i];
while (*start && isspace((unsigned char)*start))
start++;
if (*start == '\0') {
LOG_WARN("Rejected ham %s: must contain at least 1 non-whitespace character", fieldNames[i]);
return;
}
}
}
// Set call sign and override lora limitations for licensed use
strncpy(owner.long_name, p.call_sign, sizeof(owner.long_name));
owner.long_name[sizeof(owner.long_name) - 1] = '\0';
sanitizeUtf8(owner.long_name, sizeof(owner.long_name));
strncpy(owner.short_name, p.short_name, sizeof(owner.short_name));
owner.short_name[sizeof(owner.short_name) - 1] = '\0';
sanitizeUtf8(owner.short_name, sizeof(owner.short_name));
owner.is_licensed = true;
config.lora.override_duty_cycle = true;
config.lora.tx_power = p.tx_power;
config.lora.override_frequency = p.frequency;
// Set node info broadcast interval to 10 minutes
// For FCC minimum call-sign announcement
config.device.node_info_broadcast_secs = 600;
config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_LOCAL_ONLY;
// Remove PSK of primary channel for plaintext amateur usage
if (channels.ensureLicensedOperation()) {
sendWarning(licensedModeMessage);
}
channels.onConfigChanged();
service->reloadOwner(false);
saveChanges(SEGMENT_CONFIG | SEGMENT_NODEDATABASE | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS);
}
AdminModule::AdminModule() : ProtobufModule("Admin", meshtastic_PortNum_ADMIN_APP, &meshtastic_AdminMessage_msg)
{
// restrict to the admin channel for rx
// boundChannel = Channels::adminChannel;
}
void AdminModule::setPassKey(meshtastic_AdminMessage *res)
{
if (session_time == 0 || millis() / 1000 > session_time + 150) {
for (int i = 0; i < 8; i++) {
session_passkey[i] = random();
}
session_time = millis() / 1000;
}
memcpy(res->session_passkey.bytes, session_passkey, 8);
res->session_passkey.size = 8;
printBytes("Set admin key to ", res->session_passkey.bytes, 8);
// if halfway to session_expire, regenerate session_passkey, reset the timeout
// set the key in the packet
}
bool AdminModule::checkPassKey(meshtastic_AdminMessage *res)
{ // check that the key in the packet is still valid
printBytes("Incoming session key: ", res->session_passkey.bytes, 8);
printBytes("Expected session key: ", session_passkey, 8);
return (session_time + 300 > millis() / 1000 && res->session_passkey.size == 8 &&
memcmp(res->session_passkey.bytes, session_passkey, 8) == 0);
}
bool AdminModule::messageIsResponse(const meshtastic_AdminMessage *r)
{
if (r->which_payload_variant == meshtastic_AdminMessage_get_channel_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_owner_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_config_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_module_config_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_canned_message_module_messages_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_device_metadata_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_ringtone_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_device_connection_status_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_node_remote_hardware_pins_response_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_ui_config_response_tag)
return true;
else
return false;
}
bool AdminModule::messageIsRequest(const meshtastic_AdminMessage *r)
{
if (r->which_payload_variant == meshtastic_AdminMessage_get_channel_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_owner_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_config_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_module_config_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_canned_message_module_messages_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_device_metadata_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_ringtone_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_device_connection_status_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_node_remote_hardware_pins_request_tag ||
r->which_payload_variant == meshtastic_AdminMessage_get_ui_config_request_tag)
return true;
else
return false;
}
void AdminModule::handleSendInputEvent(const meshtastic_AdminMessage_InputEvent &inputEvent)
{
LOG_DEBUG("Processing input event: event_code=%u, kb_char=%u, touch_x=%u, touch_y=%u", inputEvent.event_code,
inputEvent.kb_char, inputEvent.touch_x, inputEvent.touch_y);
// Create InputEvent for injection.
//
// `.source` MUST be a non-null C string: the LOG_INFO below formats it
// with %s, and passing NULL to the esp-log formatter crashes with
// Guru Meditation LoadProhibited at strlen(NULL). Other InputBroker
// sources (buttons, rotary) always set this; the admin path was the
// only one leaving it default-null.
InputEvent event = {.source = "admin",
.inputEvent = (input_broker_event)inputEvent.event_code,
.kbchar = (unsigned char)inputEvent.kb_char,
.touchX = inputEvent.touch_x,
.touchY = inputEvent.touch_y};
// Log the event being injected
LOG_INFO("Injecting input event from admin: source=%s, event=%u, char=%c(%u), touch=(%u,%u)", event.source, event.inputEvent,
(event.kbchar >= 32 && event.kbchar <= 126) ? event.kbchar : '?', event.kbchar, event.touchX, event.touchY);
// Wake the device if asleep
powerFSM.trigger(EVENT_INPUT);
#if !defined(MESHTASTIC_EXCLUDE_INPUTBROKER)
// Inject the event through InputBroker
if (inputBroker) {
inputBroker->injectInputEvent(&event);
} else {
LOG_ERROR("InputBroker not available for event injection");
}
#endif
}
void AdminModule::sendWarning(const char *format, ...)
{
meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
if (!cn)
return;
cn->level = meshtastic_LogRecord_Level_WARNING;
cn->time = getValidTime(RTCQualityFromNet);
va_list args;
va_start(args, format);
// Format the arguments directly into the notification object
vsnprintf(cn->message, sizeof(cn->message), format, args);
va_end(args);
service->sendClientNotification(cn);
}
void AdminModule::sendWarningAndLog(const char *format, ...)
{
// We need a temporary buffer to hold the formatted text so we can log it
// Using 250 bytes as a safe upper limit for typical text notifications
char buf[250];
va_list args;
va_start(args, format);
vsnprintf(buf, sizeof(buf), format, args);
va_end(args);
LOG_WARN(buf);
// 2. Call sendWarning
// SECURITY NOTE: We pass "%s", buf instead of just 'buf'.
// If 'buf' contained a % symbol (e.g. "Battery 50%"), passing it directly
// would crash sendWarning. "%s" treats it purely as text.
sendWarning("%s", buf);
}
void disableBluetooth()
{
#if HAS_BLUETOOTH
#ifdef ARCH_ESP32
if (nimbleBluetooth)
nimbleBluetooth->deinit();
#elif defined(ARCH_NRF52)
if (nrf52Bluetooth)
nrf52Bluetooth->shutdown();
#elif defined(ARCH_NRF54L15)
if (nrf54l15Bluetooth)
nrf54l15Bluetooth->shutdown();
#endif
#endif
}