AustinandBen Meadors
a43cd75bd3
* Add Lilygo T-Impulse-Plus
* Enable small screen layout 64x32
* trunk'd
* Haptic Feedback (short and long press)
* enable Charging Indicator
* enable nrfutil uploads
* trunk fmt
* Add Lilygo T-Impulse-Plus
* Enable small screen layout 64x32
* trunk'd
* Haptic Feedback (short and long press)
* enable Charging Indicator
* enable nrfutil uploads
* trunk fmt
* enable proper device model
* Dim the haptic duration a bit.
* Fix GPS pins and speed. Module enable is active low, speed is 38400
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* set correct geometry.
* Add custom_meshtastic_* metadata to t-impulse-plus platformio.ini
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
(cherry picked from commit cb867cc6c8)
91 lines
2.2 KiB
C++
91 lines
2.2 KiB
C++
/*
|
|
* variant.cpp - Digital pin mapping for LilyGo T-Impulse Plus
|
|
*
|
|
* Board: T-Impulse Plus V1.0 (nRF52840)
|
|
* Hardware:
|
|
* - SSD1315 OLED
|
|
* - SX1262 (S62F)
|
|
* - MIA-M10Q GPS
|
|
* - ICM20948 IMU
|
|
* - ZD25WQ32C Flash
|
|
* - TTP223 Touch Button
|
|
* - Vibration Motor
|
|
*/
|
|
|
|
#include "variant.h"
|
|
#include "nrf.h"
|
|
#include "wiring_constants.h"
|
|
#include "wiring_digital.h"
|
|
|
|
extern "C" {
|
|
const uint32_t g_ADigitalPinMap[] = {
|
|
// D0-D6: LoRa SX1262 (S62F module) SPI + control
|
|
2, // D0 P0.02 SX1262_RST
|
|
29, // D1 P0.29 SX1262_DIO1
|
|
31, // D2 P0.31 SX1262_BUSY
|
|
46, // D3 P1.14 SX1262_CS
|
|
3, // D4 P0.03 SPI_SCK
|
|
30, // D5 P0.30 SPI_MISO
|
|
28, // D6 P0.28 SPI_MOSI
|
|
|
|
// D7-D8: RF switch control
|
|
45, // D7 P1.13 SX1262_RF_VC1 (TXEN)
|
|
39, // D8 P1.07 SX1262_RF_VC2 (RXEN)
|
|
|
|
// D9-D11: GPS (u-blox MIA-M10Q)
|
|
44, // D9 P1.12 GPS_TX (MCU TX -> GPS RX)
|
|
43, // D10 P1.11 GPS_RX (MCU RX <- GPS TX)
|
|
42, // D11 P1.10 GPS_EN
|
|
|
|
// D12-D13: Display I2C (SSD1315)
|
|
20, // D12 P0.20 SCREEN_SDA
|
|
15, // D13 P0.15 SCREEN_SCL
|
|
|
|
// D14-D15: Sensor I2C (ICM20948, SGM41562)
|
|
40, // D14 P1.08 IMU_SDA
|
|
11, // D15 P0.11 IMU_SCL
|
|
|
|
// D16-D17: Battery management
|
|
5, // D16 P0.05 BATTERY_ADC
|
|
25, // D17 P0.25 BATTERY_MEASUREMENT_CONTROL
|
|
|
|
// D18: Touch button (TTP223)
|
|
36, // D18 P1.04 TTP223_KEY
|
|
|
|
// D19: Vibration motor
|
|
22, // D19 P0.22 VIBRATION_MOTOR
|
|
|
|
// D20: LDO enable
|
|
14, // D20 P0.14 RT9080_EN
|
|
|
|
// D21-D26: Flash QSPI (ZD25WQ32C)
|
|
12, // D21 P0.12 FLASH_CS
|
|
4, // D22 P0.04 FLASH_SCLK
|
|
6, // D23 P0.06 FLASH_IO0
|
|
41, // D24 P1.09 FLASH_IO1
|
|
8, // D25 P0.08 FLASH_IO2
|
|
26, // D26 P0.26 FLASH_IO3
|
|
|
|
// D27-D28: Interrupt lines
|
|
7, // D27 P0.07 ICM20948_INT
|
|
16, // D28 P0.16 SGM41562_INT
|
|
|
|
// D29: Boot button
|
|
24, // D29 P0.24 BOOT
|
|
};
|
|
}
|
|
|
|
void initVariant()
|
|
{
|
|
// Flash CS high (deselect)
|
|
pinMode(PIN_QSPI_CS, OUTPUT);
|
|
digitalWrite(PIN_QSPI_CS, HIGH);
|
|
|
|
// Enable battery voltage measurement
|
|
pinMode(BAT_READ, OUTPUT);
|
|
digitalWrite(BAT_READ, HIGH);
|
|
|
|
// Enable RT9080 LDO
|
|
pinMode(D20, OUTPUT);
|
|
digitalWrite(D20, HIGH);
|
|
} |