AustinGitHubThomas GöttgensBen MeadorsCopilot Autofix powered by AIcopilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>* Add Lilygo T-Impulse-Plus * Enable small screen layout 64x32 * trunk'd * Haptic Feedback (short and long press) * enable Charging Indicator * enable nrfutil uploads * trunk fmt * Add Lilygo T-Impulse-Plus * Enable small screen layout 64x32 * trunk'd * Haptic Feedback (short and long press) * enable Charging Indicator * enable nrfutil uploads * trunk fmt * enable proper device model * Dim the haptic duration a bit. * Fix GPS pins and speed. Module enable is active low, speed is 38400 * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * set correct geometry. * Add custom_meshtastic_* metadata to t-impulse-plus platformio.ini --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
181 lines
8.1 KiB
C
181 lines
8.1 KiB
C
#ifndef _T_IMPULSE_PLUS_H_
|
|
#define _T_IMPULSE_PLUS_H_
|
|
#include "WVariant.h"
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Clock Configuration
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define VARIANT_MCK (64000000ul)
|
|
#define USE_LFXO
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Pin Capacity Definitions
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define PINS_COUNT (30u)
|
|
#define NUM_DIGITAL_PINS (30u)
|
|
#define NUM_ANALOG_INPUTS (1u)
|
|
#define NUM_ANALOG_OUTPUTS (0u)
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Digital Pin Mapping
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define D0 0 // P0.02 SX1262_RST
|
|
#define D1 1 // P0.29 SX1262_DIO1
|
|
#define D2 2 // P0.31 SX1262_BUSY
|
|
#define D3 3 // P1.14 SX1262_CS
|
|
#define D4 4 // P0.03 SPI_SCK
|
|
#define D5 5 // P0.30 SPI_MISO
|
|
#define D6 6 // P0.28 SPI_MOSI
|
|
#define D7 7 // P1.13 RF_VC1 (TXEN)
|
|
#define D8 8 // P1.07 RF_VC2 (RXEN)
|
|
#define D9 9 // P1.12 GPS module TX → MCU RX
|
|
#define D10 10 // P1.11 GPS module RX ← MCU TX
|
|
#define D11 11 // P1.10 GPS_EN (active LOW)
|
|
#define D12 12 // P0.20 SCREEN_SDA
|
|
#define D13 13 // P0.15 SCREEN_SCL
|
|
#define D14 14 // P1.08 IMU_SDA
|
|
#define D15 15 // P0.11 IMU_SCL
|
|
#define D16 16 // P0.05 BATTERY_ADC
|
|
#define D17 17 // P0.25 BATTERY_CTL
|
|
#define D18 18 // P1.04 TTP223_KEY
|
|
#define D19 19 // P0.22 VIBRATION_MOTOR
|
|
#define D20 20 // P0.14 RT9080_EN
|
|
#define D21 21 // P0.12 FLASH_CS
|
|
#define D22 22 // P0.04 FLASH_SCLK
|
|
#define D23 23 // P0.06 FLASH_IO0
|
|
#define D24 24 // P1.09 FLASH_IO1
|
|
#define D25 25 // P0.08 FLASH_IO2
|
|
#define D26 26 // P0.26 FLASH_IO3
|
|
#define D27 27 // P0.07 ICM20948_INT
|
|
#define D28 28 // P0.16 SGM41562_INT
|
|
#define D29 29 // P0.24 BOOT
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// LED Configuration (no physical LED)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define LED_STATE_ON 1
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Button Configuration (TTP223 capacitive touch)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define PIN_BUTTON_TOUCH D18
|
|
#define BUTTON_TOUCH_ACTIVE_LOW true
|
|
#define BUTTON_TOUCH_ACTIVE_PULLUP false
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Analog Pin Definitions
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define PIN_VBAT D16 // P0.05 Battery voltage sense
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// I2C Configuration
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Primary I2C: Display (SSD1315)
|
|
#define PIN_WIRE_SDA D12 // P0.20
|
|
#define PIN_WIRE_SCL D13 // P0.15
|
|
|
|
// Secondary I2C: IMU (ICM20948) + PMU (SGM41562)
|
|
#define WIRE_INTERFACES_COUNT 2
|
|
#define PIN_WIRE1_SDA D14 // P1.08
|
|
#define PIN_WIRE1_SCL D15 // P0.11
|
|
#define I2C_NO_RESCAN
|
|
|
|
static const uint8_t SDA = PIN_WIRE_SDA;
|
|
static const uint8_t SCL = PIN_WIRE_SCL;
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Display (SSD1315, compatible with SSD1306 driver)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define HAS_SCREEN 1
|
|
#define USE_SSD1306 1
|
|
#define OLED_TINY
|
|
#define OLED_GEOMETRY_OVERRIDE GEOMETRY_64_32
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// SPI Configuration (SX1262 LoRa)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define SPI_INTERFACES_COUNT 1
|
|
#define PIN_SPI_SCK D4 // P0.03
|
|
#define PIN_SPI_MISO D5 // P0.30
|
|
#define PIN_SPI_MOSI D6 // P0.28
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// SX1262 LoRa (S62F module)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define USE_SX1262
|
|
#define SX126X_CS D3
|
|
#define SX126X_DIO1 D1
|
|
#define SX126X_BUSY D2
|
|
#define SX126X_RESET D0
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
#define SX126X_TXEN D7 // RF_VC1
|
|
#define SX126X_RXEN D8 // RF_VC2
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Power Management
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define BAT_READ D17 // P0.25 Battery measurement control (HIGH = enable)
|
|
#define BATTERY_PIN PIN_VBAT
|
|
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
|
#define ADC_MULTIPLIER 2.0
|
|
#define AREF_VOLTAGE 3.6
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// GPS (u-blox MIA-M10Q)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define GPS_UBLOX
|
|
#define HAS_GPS 1
|
|
#define GPS_RX_PIN D9 // P1.12 — MCU RX, wired to GPS module TX
|
|
#define GPS_TX_PIN D10 // P1.11 — MCU TX, wired to GPS module RX
|
|
#define PIN_GPS_EN D11 // P1.10
|
|
#define GPS_EN_ACTIVE LOW
|
|
#define GPS_BAUDRATE 38400
|
|
#define GPS_THREAD_INTERVAL 50
|
|
#define PIN_SERIAL1_TX GPS_TX_PIN
|
|
#define PIN_SERIAL1_RX GPS_RX_PIN
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// On-board QSPI Flash (ZD25WQ32CEIGR)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define PIN_QSPI_SCK D22 // P0.04
|
|
#define PIN_QSPI_CS D21 // P0.12
|
|
#define PIN_QSPI_IO0 D23 // P0.06
|
|
#define PIN_QSPI_IO1 D24 // P1.09
|
|
#define PIN_QSPI_IO2 D25 // P0.08
|
|
#define PIN_QSPI_IO3 D26 // P0.26
|
|
|
|
#define EXTERNAL_FLASH_DEVICES W25Q32JV_IQ
|
|
#define EXTERNAL_FLASH_USE_QSPI
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Vibration Motor (GPIO active-high)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define LED_NOTIFICATION D19 // P0.22
|
|
#define HAPTIC_FEEDBACK_PIN LED_NOTIFICATION
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// IMU (ICM20948 on Wire1)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define HAS_ICM20948
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Charger (SGM41562 on Wire1 @ 0x03)
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#define HAS_SGM41562
|
|
#define SGM41562_WIRE Wire1
|
|
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
// Compatibility Definitions
|
|
// ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#define PIN_SERIAL2_RX (-1)
|
|
#define PIN_SERIAL2_TX (-1)
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // _T_IMPULSE_PLUS_H_
|