kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 4 Packages Projects Releases Wiki Activity

add a .clang-format file (#9154)

Browse Source
This commit is contained in:
Jorropo
2026-01-03 14:19:24 -06:00
committed by GitHub
co-authored by GitHub
parent abab6ce815
commit 0d11331d18
771 changed files with 77752 additions and 83184 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32/chatter2/variant.h
+22 -21
View File
@@ -26,9 +26,9 @@
// Status
// #define LED_PIN 1
// External notification
// FIXME: Check if EXT_NOTIFY_OUT actualy has any effect and removes the need for setting the external notication pin in the
// app/preferences
// #define EXT_NOTIFY_OUT 2 // The GPIO pin that acts as the external notification output (here we connect an LED to it)
// FIXME: Check if EXT_NOTIFY_OUT actualy has any effect and removes the need for setting the external notication pin in
// the app/preferences #define EXT_NOTIFY_OUT 2 // The GPIO pin that acts as the external notification output (here we
// connect an LED to it)
// Buzzer
#define PIN_BUZZER 19
@@ -73,8 +73,8 @@
#define BATTERY_PIN 34 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO34_CHANNEL
#define ADC_ATTENUATION \
ADC_ATTEN_DB_2_5 // 2_5-> 100mv-1250mv, 11-> 150mv-3100mv for ESP32
#define ADC_ATTENUATION \
ADC_ATTEN_DB_2_5 // 2_5-> 100mv-1250mv, 11-> 150mv-3100mv for ESP32
// ESP32-S2/C3/S3 are different
// lower dB for lower voltage rnage
#define ADC_MULTIPLIER 5.0 // VBATT---10k--pin34---2.5K---GND
@@ -108,19 +108,20 @@
#define LORA_CS SX126X_CS // FIXME: for some reason both are used in /src
// Many of the below values would only be used if USE_RF95 was defined, but it's not as we aren't actually using an RF95, just
// that the 4 pins above are named like it If they aren't used they don't need to be defined and doing so cause confusion to those
// adapting this file LORA_RESET value is never used in src (as we are not using RF95), so no need to define LORA_DIO0 is not used
// in src (as we are not using RF95) as SX1262 does not have it per SX1262 datasheet, so no need to define
// FIXME: confirm that the linked lines below are actually only called when using the SX126x or SX128x and no other modules
// then use SX126X_DIO1 and SX128X_DIO1 respectively for that purpose, removing the need for RF95-style LORA_* definitions when
// the RF95 isn't used
#define LORA_DIO1 \
SX126X_DIO1 // The old name is used in
// https://github.com/meshtastic/firmware/blob/7eff5e7bcb2084499b723c5e3846c15ee089e36d/src/sleep.cpp#L298, so
// must also define the old name
// LORA_DIO2 value is never used in src (as we are not using RF95), so no need to define, and if DIO2_AS_RF_SWITCH is set then it
// cannot serve any extra function even if requested to LORA_DIO3 value is never used in src (as we are not using RF95), so no
// need to define, and DIO3_AS_TCXO_AT_1V8 is set so it cannot serve any extra function even if requested to (from 13.3.2.1
// DioxMask in SX1262 datasheet: Note that if DIO2 or DIO3 are used to control the RF Switch or the TCXO, the IRQ will not be
// generated even if it is mapped to the pins.)
// Many of the below values would only be used if USE_RF95 was defined, but it's not as we aren't actually using an
// RF95, just that the 4 pins above are named like it If they aren't used they don't need to be defined and doing so
// cause confusion to those adapting this file LORA_RESET value is never used in src (as we are not using RF95), so no
// need to define LORA_DIO0 is not used in src (as we are not using RF95) as SX1262 does not have it per SX1262
// datasheet, so no need to define
// FIXME: confirm that the linked lines below are actually only called when using the SX126x or SX128x and no other
// modules then use SX126X_DIO1 and SX128X_DIO1 respectively for that purpose, removing the need for RF95-style LORA_*
// definitions when the RF95 isn't used
#define LORA_DIO1 \
SX126X_DIO1 // The old name is used in
// https://github.com/meshtastic/firmware/blob/7eff5e7bcb2084499b723c5e3846c15ee089e36d/src/sleep.cpp#L298,
// so must also define the old name
// LORA_DIO2 value is never used in src (as we are not using RF95), so no need to define, and if DIO2_AS_RF_SWITCH is
// set then it cannot serve any extra function even if requested to LORA_DIO3 value is never used in src (as we are not
// using RF95), so no need to define, and DIO3_AS_TCXO_AT_1V8 is set so it cannot serve any extra function even if
// requested to (from 13.3.2.1 DioxMask in SX1262 datasheet: Note that if DIO2 or DIO3 are used to control the RF Switch
// or the TCXO, the IRQ will not be generated even if it is mapped to the pins.)