kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 3 Packages Projects Releases Wiki Activity

add a .clang-format file (#9154)

Browse Source
This commit is contained in:
Jorropo
2026-01-03 14:19:24 -06:00
committed by GitHub
parent abab6ce815
commit 0d11331d18
771 changed files with 77752 additions and 83184 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32s3/CDEBYTE_EoRa-S3/variant.h
+13 -12
View File
@@ -19,9 +19,9 @@
// Battery voltage monitoring - TODO: test, currently untested, copied from T3S3 variant
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_MULTIPLIER \
2.11 // ratio of voltage divider = 2.0 (R10=1M, R13=1M), plus some undervoltage correction - TODO: this was carried over from
// the T3S3, test to see if the undervoltage correction is needed.
#define ADC_MULTIPLIER \
2.11 // ratio of voltage divider = 2.0 (R10=1M, R13=1M), plus some undervoltage correction - TODO: this was carried
// over from the T3S3, test to see if the undervoltage correction is needed.
// Display - OLED connected via I2C by the default hardware configuration
#define HAS_SCREEN 1
@@ -33,8 +33,9 @@
#define UART_TX 43
#define UART_RX 44
// Peripheral I2C - The 1mm JST SH connector furthest from the USB-C port which follows Adafruit connection standard. There are no
// pull-up resistors on these lines, the downstream device needs to include them. TODO: test, currently untested
// Peripheral I2C - The 1mm JST SH connector furthest from the USB-C port which follows Adafruit connection standard.
// There are no pull-up resistors on these lines, the downstream device needs to include them. TODO: test, currently
// untested
#define I2C_SCL1 21
#define I2C_SDA1 10
@@ -51,13 +52,13 @@
#define SX126X_DIO1 33
#define SX126X_DIO2_AS_RF_SWITCH // All switching is performed with DIO2, it is automatically inverted using circuitry.
// CDEBYTE EoRa-S3 uses an XTAL, thus we do not need DIO3 as TCXO voltage reference. Don't define SX126X_DIO3_TCXO_VOLTAGE for
// simplicity rather than defining it as 0.
#define SX126X_MAX_POWER \
22 // E22-900MM22S and E22-400MM22S have a raw SX1262 or SX1268 respsectively, they are rated to output up and including 22
// dBm out of their SX126x IC.
// CDEBYTE EoRa-S3 uses an XTAL, thus we do not need DIO3 as TCXO voltage reference. Don't define
// SX126X_DIO3_TCXO_VOLTAGE for simplicity rather than defining it as 0.
#define SX126X_MAX_POWER \
22 // E22-900MM22S and E22-400MM22S have a raw SX1262 or SX1268 respsectively, they are rated to output up and
// including 22 dBm out of their SX126x IC.
// Compatibility with old variant.h file structure - FIXME: this should be done in the respective radio interface modules to clean
// up all variants.
// Compatibility with old variant.h file structure - FIXME: this should be done in the respective radio interface
// modules to clean up all variants.
#define LORA_CS SX126X_CS
#define LORA_DIO1 SX126X_DIO1