add a .clang-format file (#9154)

variants/nrf52840/heltec_mesh_node_t114/variant.cpp

@@ -30,9 +30,8 @@ const uint32_t g_ADigitalPinMap[] = {
     // P1
     32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
 
-void initVariant()
-{
-    // LED1
-    pinMode(PIN_LED1, OUTPUT);
-    ledOff(PIN_LED1);
+void initVariant() {
+  // LED1
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
 }

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -86,8 +86,8 @@ extern "C" {
  * Buttons
  */
 #define PIN_BUTTON1 (32 + 10)
-// #define PIN_BUTTON2 (0 + 18)      // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular
-// GPIO
+// #define PIN_BUTTON2 (0 + 18)      // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a
+// regular GPIO
 
 /*
 No longer populated on PCB
@@ -145,8 +145,7 @@ No longer populated on PCB
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
-#define PIN_SPI1_MISO                                                                                                            \
-    ST7789_MISO // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO
+#define PIN_SPI1_MISO ST7789_MISO // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO
 #define PIN_SPI1_MOSI ST7789_SDA
 #define PIN_SPI1_SCK ST7789_SCK