add a .clang-format file (#9154)

variants/nrf52840/monteops_hw1/variant.cpp

@@ -30,12 +30,11 @@ const uint32_t g_ADigitalPinMap[] = {
     // P1
     32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
 
-void initVariant()
-{
-    // LED1 & LED2
-    pinMode(PIN_LED1, OUTPUT);
-    ledOff(PIN_LED1);
+void initVariant() {
+  // LED1 & LED2
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
 
-    pinMode(PIN_LED2, OUTPUT);
-    ledOff(PIN_LED2);
+  pinMode(PIN_LED2, OUTPUT);
+  ledOff(PIN_LED2);
 }

variants/nrf52840/monteops_hw1/variant.h

@@ -176,8 +176,8 @@ Important for successful SX1262 initialization:
 * Setup DIO2 to control the antenna switch
 * Setup DIO3 to control the TCXO power supply
 * Setup the SX1262 to use it's DCDC regulator and not the LDO
-* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
-control of the antenna switch
+* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do
+the control of the antenna switch
 
 SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG