kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 5 Packages Projects Releases Wiki Activity

add a .clang-format file (#9154)

Browse Source
This commit is contained in:
Jorropo
2026-01-03 14:19:24 -06:00
committed by GitHub
parent abab6ce815
commit 0d11331d18
771 changed files with 77752 additions and 83184 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/nrf52840/rak4631/variant.cpp
+9 -10
View File
@@ -30,16 +30,15 @@ const uint32_t g_ADigitalPinMap[] = {
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
void initVariant() {
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
// 3V3 Power Rail
pinMode(PIN_3V3_EN, OUTPUT);
digitalWrite(PIN_3V3_EN, HIGH);
// 3V3 Power Rail
pinMode(PIN_3V3_EN, OUTPUT);
digitalWrite(PIN_3V3_EN, HIGH);
}
variants/nrf52840/rak4631/variant.h
+5 -7
View File
@@ -195,8 +195,8 @@ Important for successful SX1262 initialization:
* Setup DIO2 to control the antenna switch
* Setup DIO3 to control the TCXO power supply
* Setup the SX1262 to use it's DCDC regulator and not the LDO
* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do the
control of the antenna switch
* RAK4630 schematics show GPIO P1.07 connected to the antenna switch, but it should not be initialized, as DIO2 will do
the control of the antenna switch
SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
@@ -237,11 +237,9 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
// RAK1910 GPS module
// If using the wisblock GPS module and pluged into Port A on WisBlock base
// IO1 is hooked to PPS (pin 12 on header) = gpio 17
// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power (1 is on).
// Therefore must be 1 to keep peripherals powered
// Power is on the controllable 3V3_S rail
// #define PIN_GPS_RESET (34)
// #define PIN_GPS_EN PIN_3V3_EN
// IO2 is hooked to GPS RESET = gpio 34, but it can not be used to this because IO2 is ALSO used to control 3V3_S power
// (1 is on). Therefore must be 1 to keep peripherals powered Power is on the controllable 3V3_S rail #define
// PIN_GPS_RESET (34) #define PIN_GPS_EN PIN_3V3_EN
#define PIN_GPS_PPS (17) // Pulse per second input from the GPS
#define GPS_RX_PIN PIN_SERIAL1_RX