add a .clang-format file (#9154)
This commit is contained in:
@@ -133,8 +133,9 @@ External serial flash WP25R1635FZUIL0
|
||||
#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 (0 + 20)
|
||||
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
|
||||
#define SX1262_DIO3 \
|
||||
(0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the main
|
||||
#define SX1262_DIO3 \
|
||||
(0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from
|
||||
// the main
|
||||
// CPU?
|
||||
#define SX126X_BUSY (0 + 17)
|
||||
#define SX126X_RESET (0 + 25)
|
||||
@@ -142,8 +143,8 @@ External serial flash WP25R1635FZUIL0
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
#define TCXO_OPTIONAL
|
||||
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
|
||||
// code)
|
||||
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the
|
||||
// sx1262interface code)
|
||||
|
||||
// #define LORA_DISABLE_SENDING // Define this to disable transmission for testing (power testing etc...)
|
||||
|
||||
@@ -165,8 +166,7 @@ External serial flash WP25R1635FZUIL0
|
||||
#define PIN_POWER_EN (0 + 12)
|
||||
// #define PIN_POWER_EN1 (0 + 13)
|
||||
|
||||
#define PIN_SPI1_MISO \
|
||||
(32 + 7) // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO
|
||||
#define PIN_SPI1_MISO (32 + 7) // FIXME not really needed, but for now the SPI code requires something to be defined, pick an used GPIO
|
||||
#define PIN_SPI1_MOSI PIN_EINK_MOSI
|
||||
#define PIN_SPI1_SCK PIN_EINK_SCLK
|
||||
|
||||
|
||||
Reference in New Issue
Block a user