Add Heltec new boards. (#4226)
* Add Heltec new boards * Update variant.h disable RTC by default * Add Heltec New boards * Add Heltec new boards * Update Heltec Mesh Node definition. * Update Heltec Vision Mater E290
This commit is contained in:
Aaron.Lee
@@ -0,0 +1,63 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define HELTEC_VISION_MASTER_E290 true
|
||||
|
||||
static const uint8_t LED_BUILTIN = 35;
|
||||
#define BUILTIN_LED LED_BUILTIN // backward compatibility
|
||||
#define LED_BUILTIN LED_BUILTIN
|
||||
|
||||
static const uint8_t TX = 43;
|
||||
static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 41;
|
||||
static const uint8_t SCL = 42;
|
||||
|
||||
static const uint8_t SS = 8;
|
||||
static const uint8_t MOSI = 10;
|
||||
static const uint8_t MISO = 11;
|
||||
static const uint8_t SCK = 9;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
static const uint8_t RST_LoRa = 12;
|
||||
static const uint8_t BUSY_LoRa = 13;
|
||||
static const uint8_t DIO0 = 14;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
@@ -0,0 +1,24 @@
|
||||
[env:heltec-vision-master-e290]
|
||||
extends = esp32s3_base
|
||||
board = heltec_wifi_lora_32_V3
|
||||
build_flags =
|
||||
${esp32s3_base.build_flags}
|
||||
-I variants/heltec_vision_master_e290
|
||||
-D HELTEC_VISION_MASTER_E290
|
||||
-D EINK_DISPLAY_MODEL=GxEPD2_290_BS
|
||||
-D EINK_WIDTH=296
|
||||
-D EINK_HEIGHT=128
|
||||
; -D USE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
|
||||
; -D EINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted
|
||||
; -D EINK_LIMIT_RATE_BACKGROUND_SEC=1 ; Minimum interval between BACKGROUND updates
|
||||
; -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
|
||||
; -D EINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated
|
||||
; -D EINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
|
||||
; -D EINK_HASQUIRK_GHOSTING ; Display model is identified as "prone to ghosting"
|
||||
; -D EINK_HASQUIRK_WEAKFASTREFRESH ; Pixels set with fast-refresh are easy to clear, disrupted by sunlight
|
||||
|
||||
lib_deps =
|
||||
${esp32s3_base.lib_deps}
|
||||
https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
|
||||
lewisxhe/PCF8563_Library@^1.0.1
|
||||
upload_speed = 115200
|
||||
@@ -0,0 +1,58 @@
|
||||
// #define LED_PIN 18
|
||||
|
||||
// Enable bus for external periherals
|
||||
#define I2C_SDA SDA
|
||||
#define I2C_SCL SCL
|
||||
|
||||
#define USE_EINK
|
||||
|
||||
/*
|
||||
* eink display pins
|
||||
*/
|
||||
#define PIN_EINK_CS 3
|
||||
#define PIN_EINK_BUSY 5
|
||||
#define PIN_EINK_DC 4
|
||||
#define PIN_EINK_RES 5
|
||||
#define PIN_EINK_SCLK 2
|
||||
#define PIN_EINK_MOSI 1
|
||||
|
||||
/*
|
||||
* SPI interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 2
|
||||
|
||||
#define PIN_SPI_MISO 10 // MISO
|
||||
#define PIN_SPI_MOSI 11 // MOSI
|
||||
#define PIN_SPI_SCK 9 // SCK
|
||||
|
||||
#define VEXT_ENABLE 18 // powers the e-ink display
|
||||
#define VEXT_ON_VALUE 1
|
||||
#define BUTTON_PIN 21
|
||||
|
||||
#define ADC_CTRL 46
|
||||
#define ADC_CTRL_ENABLED HIGH
|
||||
#define BATTERY_PIN 7
|
||||
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
|
||||
#define ADC_MULTIPLIER 4.9*1.03
|
||||
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high
|
||||
|
||||
#define USE_SX1262
|
||||
|
||||
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
||||
#define LORA_RESET 12
|
||||
#define LORA_DIO1 14 // SX1262 IRQ
|
||||
#define LORA_DIO2 13 // SX1262 BUSY
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
||||
|
||||
#define LORA_SCK 9
|
||||
#define LORA_MISO 11
|
||||
#define LORA_MOSI 10
|
||||
#define LORA_CS 8
|
||||
|
||||
#define SX126X_CS LORA_CS
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
Reference in New Issue
Block a user