pull in new epaper lib (which required importing configuration.h everywhere

for dumb reasons)

src/nrf52/BQ25713.cpp

@@ -1,100 +0,0 @@
-#include "BQ25713.h"
-#include "configuration.h"
-
-#include <Wire.h>
-
-#ifdef BQ25703A_ADDR
-
-const uint8_t BQ25713::devAddr = BQ25703A_ADDR;
-
-bool BQ25713::setup()
-{
-    DEBUG_MSG("Init BQ25713\n");
-
-    //	if(!writeReg(0x34,0x9034)) return false;
-    //
-    //	if(!writeReg(0x34,0x8034)) return false;
-
-    if (!writeReg(0x00, 0x0F0A))
-        return false; // Config Charge Option 0
-
-    if (!writeReg(0x02, 0x0224)) // 512mA, FIXME, this seems to be setting a number of bits marked as reserved, why?
-        return false; // Config Charge Current
-
-    if (!writeReg(0x04, 0x1070)) // about 4.29V
-        return false; // Config Charge Voltage
-
-    if (!writeReg(0x06, 0x099C))
-        return false; // Config OTG Voltage
-
-    if (!writeReg(0x08, 0x5000))
-        return false; // Config OTG Current
-
-    //	if(!writeReg(0x0A,0x0100)) return false;//Config Input Voltage
-
-    if (!writeReg(0x0C, 0x1800)) // 4.2Vish FIXME, we could lower this?
-        return false; // Config Minimum System Voltage
-
-    if (!writeReg(0x0E, 0x4900))
-        return false; // Config Input Current
-
-    if (!writeReg(0x30, 0xE210))
-        return false; // Config Charge Option 1
-
-    if (!writeReg(0x32, 0x32BF))
-        return false; // Config Charge Option 2
-
-    if (!writeReg(0x34, 0x0834))
-        return false; // Config Charge Option 3
-
-    if (!writeReg(0x36, 0x4A65))
-        return false; // Config Prochot Option 0
-
-    if (!writeReg(0x38, 0x81FF))
-        return false; // Config Prochot Option 1
-
-    if (!writeReg(0x3A, 0xA0FF))
-        return false; // Config ADC Option
-
-    return true;
-}
-
-uint16_t BQ25713::readReg(uint8_t reg)
-{
-    Wire.beginTransmission(devAddr);
-    Wire.write(reg);
-    byte err = Wire.endTransmission();
-    if (!err) {
-        int readLen = 2;
-        Wire.requestFrom(devAddr, (int)(readLen + 1));
-        if (Wire.available() >= readLen) {
-            uint8_t lsb = Wire.read(), msb = Wire.read();
-
-            return (((uint16_t)msb) << 8) + lsb;
-        } else
-            return 0;
-    } else {
-        return 0;
-    }
-}
-
-bool BQ25713::writeReg(uint8_t reg, uint16_t v)
-{
-    Wire.beginTransmission(devAddr);
-    Wire.write(reg);
-    Wire.write(v & 0xff);
-    Wire.write((v >> 8) & 0xff);
-    byte err = Wire.endTransmission(); // 0 for success
-
-    if (!err) {
-        // Do a test readback for early debugging
-        uint16_t found = readReg(reg);
-        if (found != v) {
-            DEBUG_MSG("Readback reg=0x%0x test failed, expected 0x%0x, found 0x%0x!\n", reg, v, found);
-            return true; // claim success - FIXME
-        }
-    }
-    return !err;
-}
-
-#endif

src/nrf52/BQ25713.h

@@ -1,22 +0,0 @@
-#pragma once
-
-#include <Arduino.h>
-
-/**
- * Driver class to control/monitor BQ25713 charge controller
- */
-class BQ25713 {
-    static const uint8_t devAddr;
-
-public:
-
-    /// Return true for success
-    bool setup();
-
-private:
-    uint16_t readReg(uint8_t reg);
-
-    /// Return true for success
-    bool writeReg(uint8_t reg, uint16_t v);
-};
-

src/nrf52/NRF52Bluetooth.cpp

@@ -1,6 +1,6 @@
+#include "configuration.h"
 #include "NRF52Bluetooth.h"
 #include "BluetoothCommon.h"
-#include "configuration.h"
 #include "main.h"
 #include "mesh/PhoneAPI.h"
 #include "mesh/mesh-pb-constants.h"

src/nrf52/NRF52CryptoEngine.cpp

@@ -1,6 +1,5 @@
-
-#include "CryptoEngine.h"
 #include "configuration.h"
+#include "CryptoEngine.h"
 #include "ocrypto_aes_ctr.h"
 
 class NRF52CryptoEngine : public CryptoEngine

src/nrf52/alloc.cpp

@@ -1,3 +1,4 @@
+#include "configuration.h"
 #include "rtos.h"
 #include <assert.h>
 #include <stdlib.h>

src/nrf52/main-nrf52.cpp

@@ -1,3 +1,4 @@
+#include "configuration.h"
 #include <SPI.h>
 #include <Wire.h>
 #include <assert.h>
@@ -6,7 +7,6 @@
 #include <stdio.h>
 
 #include "NRF52Bluetooth.h"
-#include "configuration.h"
 #include "error.h"
 
 #ifdef BQ25703A_ADDR