kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 7 Packages Projects Releases Wiki Activity

Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512)

Browse Source 
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module

* Misc

* Remove errant endif
This commit is contained in:
Jonathan Bennett
2026-02-05 05:41:00 -06:00
committed by GitHub
co-authored by GitHub
parent 94b7149958
commit 2361776992
107 changed files with 207 additions and 311 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/esp32/betafpv_2400_tx_micro/variant.h
+1 -1
View File
@@ -14,7 +14,7 @@
#define LORA_CS 5
#define RF95_FAN_EN 17
// #define LED_PIN 16 // This is a LED_WS2812 not a standard LED
// This is a LED_WS2812 not a standard LED
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 16 // gpio pin used to send data to the neopixels
variants/esp32/betafpv_900_tx_nano/variant.h
+1 -1
View File
@@ -20,7 +20,7 @@
#define LORA_DIO2
#define LORA_DIO3
#define LED_PIN 16 // green - blue is at 17
#define LED_POWER 16 // green - blue is at 17
#define BUTTON_PIN 25
#define BUTTON_NEED_PULLUP
variants/esp32/chatter2/variant.h
-2
View File
@@ -23,8 +23,6 @@
#define SX126X_TXEN RADIOLIB_NC
#define SX126X_RXEN RADIOLIB_NC
// Status
// #define LED_PIN 1
// External notification
// FIXME: Check if EXT_NOTIFY_OUT actualy has any effect and removes the need for setting the external notication pin in the
// app/preferences
variants/esp32/diy/9m2ibr_aprs_lora_tracker/variant.h
+2 -2
View File
@@ -21,8 +21,8 @@
#define BUTTON_PIN 15 // Right side button - if not available, set device.button_gpio to 0 from Meshtastic client
// LEDs
#define LED_PIN 13 // Tx LED
#define USER_LED 2 // Rx LED
#define LED_POWER 13 // Tx LED
#define USER_LED 2 // Rx LED
// Buzzer
#define PIN_BUZZER 33
variants/esp32/diy/hydra/variant.h
+1 -1
View File
@@ -15,7 +15,7 @@
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define LED_POWER 2 // add status LED (compatible with core-pcb and DIY targets)
// Radio
#define USE_SX1262 // E22-900M30S uses SX1262
variants/esp32/diy/v1/variant.h
+1 -1
View File
@@ -15,7 +15,7 @@
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
#define EXT_PWR_DETECT 4 // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define LED_POWER 2 // add status LED (compatible with core-pcb and DIY targets)
#define LORA_DIO0 26 // a No connect on the SX1262/SX1268 module
#define LORA_RESET 23 // RST for SX1276, and for SX1262/SX1268
variants/esp32/hackerboxes_esp32_io/variant.h
+1 -1
View File
@@ -3,7 +3,7 @@
// HACKBOX LoRa IO Kit
// Uses a ESP-32-WROOM and a RA-01SH (SX1262) LoRa Board
#define LED_PIN 2 // LED
#define LED_POWER 2 // LED
#define LED_STATE_ON 1 // State when LED is lit
#define HAS_SCREEN 0
variants/esp32/heltec_v1/variant.h
+1 -1
View File
@@ -12,7 +12,7 @@
#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
#define LED_PIN 25 // If defined we will blink this LED
#define LED_POWER 25 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define USE_RF95
variants/esp32/heltec_v2.1/variant.h
+1 -1
View File
@@ -18,7 +18,7 @@
#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define LED_POWER 25 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define USE_RF95
variants/esp32/heltec_v2/variant.h
+1 -1
View File
@@ -13,7 +13,7 @@
#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define LED_POWER 25 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define USE_RF95
variants/esp32/heltec_wireless_bridge/variant.h
+1 -1
View File
@@ -15,7 +15,7 @@
#undef GPS_TX_PIN
// Green / Lora = PIN 22 / GPIO2, Yellow / Wifi = PIN 23 / GPIO0, Blue / BLE = PIN 25 / GPIO16
#define LED_PIN 22
#define LED_POWER 22
#define WIFI_LED 23
#define BLE_LED 25
variants/esp32/heltec_wsl_v2.1/variant.h
+1 -1
View File
@@ -1,7 +1,7 @@
#define I2C_SCL SCL
#define I2C_SDA SDA
#define LED_PIN LED
#define LED_POWER LED
// active low, powers the Battery reader, but no lora antenna boost (?)
// #define VEXT_ENABLE Vext
variants/esp32/m5stack_coreink/variant.h
+1 -1
View File
@@ -11,7 +11,7 @@
// Green LED
#define LED_STATE_ON 1 // State when LED is lit
#define LED_PIN 10
#define LED_POWER 10
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
variants/esp32/radiomaster_900_bandit_nano/variant.h
+1 -1
View File
@@ -37,7 +37,7 @@
/*
LED PIN setup.
*/
#define LED_PIN 15
#define LED_POWER 15
/*
Five way button when using ADC.
variants/esp32/rak11200/variant.h
+1 -1
View File
@@ -43,7 +43,7 @@ static const uint8_t SCK = 33;
#undef GPS_TX_PIN
#define GPS_TX_PIN (TX1)
#define LED_PIN LED_BLUE
#define LED_POWER LED_BLUE
#define PIN_VBAT WB_A0
#define BATTERY_PIN PIN_VBAT
variants/esp32/tbeam/variant.h
+2 -2
View File
@@ -9,7 +9,7 @@
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define LED_STATE_ON 0 // State when LED is lit
#define LED_PIN 4 // Newer tbeams (1.1) have an extra led on GPIO4
#define LED_POWER 4 // Newer tbeams (1.1) have an extra led on GPIO4
// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
// not found then probe for SX1262
@@ -49,7 +49,7 @@
#undef EXT_NOTIFY_OUT
#undef LED_STATE_ON
#undef LED_PIN
#undef LED_POWER
#define HAS_CST226SE 1
#define HAS_TOUCHSCREEN 1
variants/esp32/tlora_v1/variant.h
+1 -1
View File
@@ -5,7 +5,7 @@
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define VEXT_ON_VALUE LOW
#define LED_PIN 2 // If defined we will blink this LED
#define LED_POWER 2 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define BUTTON_NEED_PULLUP
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
variants/esp32/tlora_v1_3/variant.h
+1 -1
View File
@@ -7,7 +7,7 @@
#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define LED_POWER 25 // If defined we will blink this LED
#define BUTTON_PIN 36
#define BUTTON_NEED_PULLUP
variants/esp32/tlora_v2/variant.h
+1 -1
View File
@@ -5,7 +5,7 @@
#define I2C_SCL 22
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define LED_POWER 25 // If defined we will blink this LED
#define BUTTON_PIN \
0 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
// between this pin and ground
variants/esp32/tlora_v2_1_16/platformio.ini
+1 -1
View File
@@ -22,4 +22,4 @@ build_flags =
${env:tlora-v2-1-1_6.build_flags}
-DBUTTON_PIN=0
-DPIN_BUZZER=25
-DLED_PIN=-1
-DLED_POWER=-1
variants/esp32/tlora_v2_1_16/variant.h
+3 -3
View File
@@ -8,10 +8,10 @@
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
#if defined(LED_PIN) && LED_PIN == -1
#undef LED_PIN
#if defined(LED_POWER) && LED_POWER == -1
#undef LED_POWER
#else
#define LED_PIN 25 // If defined we will blink this LED
#define LED_POWER 25 // If defined we will blink this LED
#endif
#define USE_RF95
variants/esp32/tlora_v2_1_18/variant.h
+1 -1
View File
@@ -6,7 +6,7 @@
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
#define LED_PIN 25 // If defined we will blink this LED
#define LED_POWER 25 // If defined we will blink this LED
#define BUTTON_PIN 12 // If defined, this will be used for user button presses,
#define BUTTON_NEED_PULLUP
variants/esp32/trackerd/variant.h
+1 -1
View File
@@ -8,7 +8,7 @@
#define GPS_RX_PIN 9
#define GPS_TX_PIN 10
#define LED_PIN 13 // 13 red, 2 blue, 15 red
#define LED_POWER 13 // 13 red, 2 blue, 15 red
#define BUTTON_PIN 0
#define BUTTON_NEED_PULLUP