Basic T-Deck support (#2630)
* add hwid for auto-detection * fix: heltec-wireless-tracker USB serial * T-Deck support * trunk fmt * set FRAMERATE to 1 * fix some defines * trunk fmt * corrected vendor link
This commit is contained in:
Manuel
@@ -0,0 +1,69 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define USB_VID 0x303a
|
||||
#define USB_PID 0x1001
|
||||
|
||||
#define EXTERNAL_NUM_INTERRUPTS 46
|
||||
#define NUM_DIGITAL_PINS 48
|
||||
#define NUM_ANALOG_INPUTS 20
|
||||
|
||||
#define analogInputToDigitalPin(p) (((p) < NUM_ANALOG_INPUTS) ? (analogChannelToDigitalPin(p)) : -1)
|
||||
#define digitalPinToInterrupt(p) (((p) < NUM_DIGITAL_PINS) ? (p) : -1)
|
||||
#define digitalPinHasPWM(p) (p < EXTERNAL_NUM_INTERRUPTS)
|
||||
|
||||
// static const uint8_t LED_BUILTIN = -1;
|
||||
|
||||
static const uint8_t TX = 43;
|
||||
static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 18;
|
||||
static const uint8_t SCL = 8;
|
||||
|
||||
// Default SPI will be mapped to Radio
|
||||
static const uint8_t SS = 9;
|
||||
static const uint8_t MOSI = 41;
|
||||
static const uint8_t MISO = 38;
|
||||
static const uint8_t SCK = 40;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
static const uint8_t BAT_ADC_PIN = 4;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
@@ -0,0 +1,14 @@
|
||||
; LilyGo T-Deck
|
||||
[env:t-deck]
|
||||
extends = esp32s3_base
|
||||
board = t-deck
|
||||
upload_protocol = esp-builtin
|
||||
debug_tool = esp-builtin
|
||||
|
||||
build_flags = ${esp32_base.build_flags}
|
||||
-DT_DECK
|
||||
-DBOARD_HAS_PSRAM
|
||||
-Ivariants/t-deck
|
||||
|
||||
lib_deps = ${esp32s3_base.lib_deps}
|
||||
lovyan03/LovyanGFX@^1.1.7
|
||||
@@ -0,0 +1,74 @@
|
||||
// ST7789 TFT LCD
|
||||
#define ST7789_CS 12
|
||||
#define ST7789_RS 11 // DC
|
||||
#define ST7789_SDA 41 // MOSI
|
||||
#define ST7789_SCK 40
|
||||
#define ST7789_RESET -1
|
||||
#define ST7789_MISO 38
|
||||
#define ST7789_BUSY -1
|
||||
#define ST7789_BL 42
|
||||
#define ST7789_SPI_HOST SPI2_HOST
|
||||
#define ST7789_BACKLIGHT_EN 42
|
||||
#define SPI_FREQUENCY 40000000
|
||||
#define SPI_READ_FREQUENCY 16000000
|
||||
#define TFT_HEIGHT 320
|
||||
#define TFT_WIDTH 240
|
||||
#define TFT_OFFSET_X 0
|
||||
#define TFT_OFFSET_Y 0
|
||||
#define SCREEN_ROTATE
|
||||
#define SCREEN_TRANSITION_FRAMERATE 1 // fps
|
||||
#define SCREEN_TOUCH_INT 16
|
||||
#define TOUCH_SLAVE_ADDRESS 0x5D // GT911
|
||||
|
||||
#define BUTTON_PIN 0
|
||||
// #define BUTTON_NEED_PULLUP
|
||||
|
||||
#define HAS_GPS 0
|
||||
#undef GPS_RX_PIN
|
||||
#undef GPS_TX_PIN
|
||||
|
||||
// Have SPI interface SD card slot
|
||||
#define HAS_SDCARD 1
|
||||
#define SPI_MOSI (41)
|
||||
#define SPI_SCK (40)
|
||||
#define SPI_MISO (38)
|
||||
#define SPI_CS (39)
|
||||
#define SDCARD_CS SPI_CS
|
||||
|
||||
#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
|
||||
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
|
||||
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
|
||||
|
||||
// keyboard
|
||||
#define I2C_SDA 18 // I2C pins for this board
|
||||
#define I2C_SCL 8
|
||||
#define BOARD_POWERON 10 // must be set to HIGH
|
||||
#define KB_SLAVE_ADDRESS 0x55
|
||||
#define KB_BL_PIN 46 // INT, set to INPUT
|
||||
#define KB_UP 2
|
||||
#define KB_DOWN 3
|
||||
#define KB_LEFT 1
|
||||
#define KB_RIGHT 15
|
||||
|
||||
#define USE_SX1262
|
||||
#define USE_SX1268
|
||||
|
||||
#define RF95_SCK 40
|
||||
#define RF95_MISO 38
|
||||
#define RF95_MOSI 41
|
||||
#define RF95_NSS 9
|
||||
|
||||
#define LORA_DIO0 -1 // a No connect on the SX1262 module
|
||||
#define LORA_RESET 17
|
||||
#define LORA_DIO1 45 // SX1262 IRQ
|
||||
#define LORA_DIO2 13 // SX1262 BUSY
|
||||
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
||||
|
||||
#define SX126X_CS RF95_NSS // FIXME - we really should define LORA_CS instead
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
|
||||
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
|
||||
// code)
|
||||
Reference in New Issue
Block a user