Merge pull request #9262 from meshtastic/develop

Develop to master

bin/build-esp32.sh

@@ -38,4 +38,4 @@ cp bin/device-install.* $OUTDIR/
 cp bin/device-update.* $OUTDIR/
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/build-nrf52.sh

@@ -49,4 +49,4 @@ if (echo $1 | grep -q "rak4631"); then
 fi
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/build-rp2xx0.sh

@@ -30,4 +30,4 @@ echo "Copying uf2 file"
 cp $BUILDDIR/$basename.uf2 $OUTDIR/$basename.uf2
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/build-stm32wl.sh

@@ -30,4 +30,4 @@ echo "Copying STM32 bin file"
 cp $BUILDDIR/$basename.bin $OUTDIR/$basename.bin
 
 echo "Copying manifest"
-cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json
+cp $BUILDDIR/$basename.mt.json $OUTDIR/$basename.mt.json || true

bin/config.d/lora-usb-meshstick-1262.yaml

@@ -0,0 +1,14 @@
+Lora:
+  Module: sx1262
+  CS: 0
+  IRQ: 6
+  Reset: 2
+  Busy: 4
+  RXen: 1
+  DIO2_AS_RF_SWITCH: true
+  spidev: ch341
+  DIO3_TCXO_VOLTAGE: true
+#  USB_Serialnum: 12345678
+  USB_PID: 0x5512
+  USB_VID: 0x1A86
+  SX126X_MAX_POWER: 22

bin/meshtasticd-start.sh

@@ -0,0 +1,32 @@
+#!/usr/bin/env sh
+
+INSTANCE=$1
+CONF_DIR="/etc/meshtasticd/config.d"
+VFS_DIR="/var/lib"
+
+# If no instance ID provided, start bare daemon and exit
+echo "no instance ID provided, starting bare meshtasticd service"
+if [ -z "${INSTANCE}" ]; then
+  /usr/bin/meshtasticd
+  exit 0
+fi
+
+# Make VFS dir if it does not exist
+if [ ! -d "${VFS_DIR}/meshtasticd-${INSTANCE}" ]; then
+  echo "vfs for ${INSTANCE} does not exist, creating it."
+  mkdir "${VFS_DIR}/meshtasticd-${INSTANCE}"
+fi
+
+# Abort if config for $INSTANCE does not exist
+if [ ! -f "${CONF_DIR}/config-${INSTANCE}.yaml" ]; then
+  echo "no config for ${INSTANCE} found in ${CONF_DIR}. refusing to start" >&2
+  exit 1
+fi
+
+# Start meshtasticd with instance parameters
+printf "starting meshtasticd-%s..., ${INSTANCE}"
+if /usr/bin/meshtasticd --config="${CONF_DIR}/config-${INSTANCE}.yaml" --fsdir="${VFS_DIR}/meshtasticd-${INSTANCE}"; then
+  echo "ok"
+else
+  echo "failed"
+fi

bin/meshtasticd.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Meshtastic Native Daemon
+Description=Meshtastic %i Daemon
 After=network-online.target
 StartLimitInterval=200
 StartLimitBurst=5
@@ -9,7 +9,7 @@ AmbientCapabilities=CAP_NET_BIND_SERVICE
 User=meshtasticd
 Group=meshtasticd
 Type=simple
-ExecStart=/usr/bin/meshtasticd
+ExecStart=/usr/bin/meshtasticd-start.sh %i
 Restart=always
 RestartSec=3
 

bin/native-install.sh

@@ -1,6 +1,7 @@
 #!/usr/bin/env bash
 
 cp "release/meshtasticd_linux_$(uname -m)" /usr/bin/meshtasticd
+cp "bin/meshtasticd-start.sh" /usr/bin/meshtasticd-start.sh
 mkdir -p /etc/meshtasticd
 if [[ -f "/etc/meshtasticd/config.yaml" ]]; then
 	cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.18" date="2026-01-02">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.18</url>
+    </release>
     <release version="2.7.17" date="2025-11-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.17</url>
     </release>

bin/platformio-custom.py

@@ -2,11 +2,12 @@
 # trunk-ignore-all(ruff/F821)
 # trunk-ignore-all(flake8/F821): For SConstruct imports
 import sys
-from os.path import join, basename, isfile
+from os.path import join
 import subprocess
 import json
 import re
 from datetime import datetime
+from typing import Dict
 
 from readprops import readProps
 
@@ -14,10 +15,50 @@ Import("env")
 platform = env.PioPlatform()
 progname = env.get("PROGNAME")
 lfsbin = f"{progname.replace('firmware-', 'littlefs-')}.bin"
+manifest_ran = False
+
+def infer_architecture(board_cfg):
+    try:
+        mcu = board_cfg.get("build.mcu") if board_cfg else None
+    except KeyError:
+        mcu = None
+    except Exception:
+        mcu = None
+    if not mcu:
+        return None
+    mcu_l = str(mcu).lower()
+    if "esp32s3" in mcu_l:
+        return "esp32-s3"
+    if "esp32c6" in mcu_l:
+        return "esp32-c6"
+    if "esp32c3" in mcu_l:
+        return "esp32-c3"
+    if "esp32" in mcu_l:
+        return "esp32"
+    if "rp2040" in mcu_l:
+        return "rp2040"
+    if "rp2350" in mcu_l:
+        return "rp2350"
+    if "nrf52" in mcu_l or "nrf52840" in mcu_l:
+        return "nrf52840"
+    if "stm32" in mcu_l:
+        return "stm32"
+    return None
 
 def manifest_gather(source, target, env):
+    global manifest_ran
+    if manifest_ran:
+        return
+    # Skip manifest generation if we cannot determine architecture (host/native builds)
+    board_arch = infer_architecture(env.BoardConfig())
+    if not board_arch:
+        print(f"Skipping mtjson generation for unknown architecture (env={env.get('PIOENV')})")
+        manifest_ran = True
+        return
+    manifest_ran = True
     out = []
     board_platform = env.BoardConfig().get("platform")
+    board_mcu = env.BoardConfig().get("build.mcu").lower()
     needs_ota_suffix = board_platform == "nordicnrf52"
     check_paths = [
         progname,
@@ -29,7 +70,9 @@ def manifest_gather(source, target, env):
         f"{progname}.uf2",
         f"{progname}.factory.uf2",
         f"{progname}.zip",
-        lfsbin
+        lfsbin,
+        f"mt-{board_mcu}-ota.bin",
+        "bleota-c3.bin"
     ]
     for p in check_paths:
         f = env.File(env.subst(f"$BUILD_DIR/{p}"))
@@ -47,14 +90,39 @@ def manifest_gather(source, target, env):
     manifest_write(out, env)
 
 def manifest_write(files, env):
+    # Defensive: also skip manifest writing if we cannot determine architecture
+    def get_project_option(name):
+        try:
+            return env.GetProjectOption(name)
+        except Exception:
+            return None
+
+    def get_project_option_any(names):
+        for name in names:
+            val = get_project_option(name)
+            if val is not None:
+                return val
+        return None
+
+    def as_bool(val):
+        return str(val).strip().lower() in ("1", "true", "yes", "on")
+
+    def as_int(val):
+        try:
+            return int(str(val), 10)
+        except (TypeError, ValueError):
+            return None
+
+    def as_list(val):
+        return [item.strip() for item in str(val).split(",") if item.strip()]
+
     manifest = {
         "version": verObj["long"],
         "build_epoch": build_epoch,
-        "board": env.get("PIOENV"),
+        "platformioTarget": env.get("PIOENV"),
         "mcu": env.get("BOARD_MCU"),
         "repo": repo_owner,
         "files": files,
-        "part": None,
         "has_mui": False,
         "has_inkhud": False,
     }
@@ -69,6 +137,51 @@ def manifest_write(files, env):
     if "MESHTASTIC_INCLUDE_INKHUD" in env.get("CPPDEFINES", []):
         manifest["has_inkhud"] = True
 
+    pioenv = env.get("PIOENV")
+    device_meta = {}
+    device_meta_fields = [
+        ("hwModel", ["custom_meshtastic_hw_model"], as_int),
+        ("hwModelSlug", ["custom_meshtastic_hw_model_slug"], str),
+        ("architecture", ["custom_meshtastic_architecture"], str),
+        ("activelySupported", ["custom_meshtastic_actively_supported"], as_bool),
+        ("displayName", ["custom_meshtastic_display_name"], str),
+        ("supportLevel", ["custom_meshtastic_support_level"], as_int),
+        ("images", ["custom_meshtastic_images"], as_list),
+        ("tags", ["custom_meshtastic_tags"], as_list),
+        ("requiresDfu", ["custom_meshtastic_requires_dfu"], as_bool),
+        ("partitionScheme", ["custom_meshtastic_partition_scheme"], str),
+        ("url", ["custom_meshtastic_url"], str),
+        ("key", ["custom_meshtastic_key"], str),
+        ("variant", ["custom_meshtastic_variant"], str),
+    ]
+
+
+    for manifest_key, option_keys, caster in device_meta_fields:
+        raw_val = get_project_option_any(option_keys)
+        if raw_val is None:
+            continue
+        parsed = caster(raw_val) if callable(caster) else raw_val
+        if parsed is not None and parsed != "":
+            device_meta[manifest_key] = parsed
+
+    # Determine architecture once; if we can't infer it, skip manifest generation
+    board_arch = device_meta.get("architecture") or infer_architecture(env.BoardConfig())
+    if not board_arch:
+        print(f"Skipping mtjson write for unknown architecture (env={env.get('PIOENV')})")
+        return
+
+    device_meta["architecture"] = board_arch
+
+    # Always set requiresDfu: true for nrf52840 targets
+    if board_arch == "nrf52840":
+        device_meta["requiresDfu"] = True
+
+    device_meta.setdefault("displayName", pioenv)
+    device_meta.setdefault("activelySupported", False)
+
+    if device_meta:
+        manifest.update(device_meta)
+
     # Write the manifest to the build directory
     with open(env.subst("$BUILD_DIR/${PROGNAME}.mt.json"), "w") as f:
         json.dump(manifest, f, indent=2)
@@ -166,8 +279,12 @@ def load_boot_logo(source, target, env):
 if ("HAS_TFT", 1) in env.get("CPPDEFINES", []):
     env.AddPreAction(f"$BUILD_DIR/{lfsbin}", load_boot_logo)
 
-mtjson_deps = ["buildprog"]
-if platform.name == "espressif32":
+board_arch = infer_architecture(env.BoardConfig())
+should_skip_manifest = board_arch is None
+
+# For host/native envs, avoid depending on 'buildprog' (some targets don't define it)
+mtjson_deps = [] if should_skip_manifest else ["buildprog"]
+if not should_skip_manifest and platform.name == "espressif32":
     # Build littlefs image as part of mtjson target
     # Equivalent to `pio run -t buildfs`
     target_lfs = env.DataToBin(
@@ -175,11 +292,27 @@ if platform.name == "espressif32":
     )
     mtjson_deps.append(target_lfs)
 
-env.AddCustomTarget(
-    name="mtjson",
-    dependencies=mtjson_deps,
-    actions=[manifest_gather],
-    title="Meshtastic Manifest",
-    description="Generating Meshtastic manifest JSON + Checksums",
-    always_build=False,
-)
+if should_skip_manifest:
+    def skip_manifest(source, target, env):
+        print(f"mtjson: skipped for native environment: {env.get('PIOENV')}")
+
+    env.AddCustomTarget(
+        name="mtjson",
+        dependencies=mtjson_deps,
+        actions=[skip_manifest],
+        title="Meshtastic Manifest (skipped)",
+        description="mtjson generation is skipped for native environments",
+        always_build=True,
+    )
+else:
+    env.AddCustomTarget(
+        name="mtjson",
+        dependencies=mtjson_deps,
+        actions=[manifest_gather],
+        title="Meshtastic Manifest",
+        description="Generating Meshtastic manifest JSON + Checksums",
+        always_build=True,
+    )
+
+    # Run manifest generation as part of the default build pipeline for non-native builds.
+    env.Default("mtjson")

bin/readprops.py

@@ -18,8 +18,9 @@ def readProps(prefsLoc):
 
     # Try to find current build SHA if if the workspace is clean.  This could fail if git is not installed
     try:
+        # Pin abbreviation length to keep local builds and CI matching (avoid auto-shortening)
         sha = (
-            subprocess.check_output(["git", "rev-parse", "--short", "HEAD"])
+            subprocess.check_output(["git", "rev-parse", "--short=7", "HEAD"])
             .decode("utf-8")
             .strip()
         )

bin/shame.py

@@ -0,0 +1,95 @@
+import sys
+import os
+import json
+from github import Github
+
+def parseFile(path):
+    with open(path, "r") as f:
+        data = json.loads(f)
+    for file in data["files"]:
+        if file["name"].endswith(".bin"):
+            return file["name"], file["bytes"]
+
+if len(sys.argv) != 4:
+    print(f"expected usage: {sys.argv[0]} <PR number> <path to old-manifests> <path to new-manifests>")
+    sys.exit(1)
+
+pr_number = int(sys.argv[1])
+
+token = os.getenv("GITHUB_TOKEN")
+if not token:
+    raise EnvironmentError("GITHUB_TOKEN not found in environment.")
+
+repo_name = os.getenv("GITHUB_REPOSITORY")  # "owner/repo"
+if not repo_name:
+    raise EnvironmentError("GITHUB_REPOSITORY not found in environment.")
+
+oldFiles = sys.argv[2]
+old = set(os.path.join(oldFiles, f) for f in os.listdir(oldFiles) if os.path.isfile(f))
+newFiles = sys.argv[3]
+new = set(os.path.join(newFiles, f) for f in os.listdir(newFiles) if os.path.isfile(f))
+
+startMarkdown = "# Target Size Changes\n\n"
+markdown = ""
+
+newlyIntroduced = new - old
+if len(newlyIntroduced) > 0:
+    markdown += "## Newly Introduced Targets\n\n"
+    # create a table
+    markdown += "| File | Size |\n"
+    markdown += "| ---- | ---- |\n"
+    for f in newlyIntroduced:
+        name, size = parseFile(f)
+        markdown += f"| `{name}` | {size}b |\n"
+
+# do not log removed targets
+# PRs only run a small subset of builds, so removed targets are not meaningful
+# since they are very likely to just be not ran in PR CI
+
+both = old & new
+degradations = []
+improvements = []
+for f in both:
+    oldName, oldSize = parseFile(f)
+    _, newSize = parseFile(f)
+    if oldSize != newSize:
+        if newSize < oldSize:
+            improvements.append((oldName, oldSize, newSize))
+        else:
+            degradations.append((oldName, oldSize, newSize))
+
+if len(degradations) > 0:
+    markdown += "\n## Degradation\n\n"
+    # create a table
+    markdown += "| File | Difference | Old Size | New Size |\n"
+    markdown += "| ---- | ---------- | -------- | -------- |\n"
+    for oldName, oldSize, newSize in degradations:
+        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
+
+if len(improvements) > 0:
+    markdown += "\n## Improvement\n\n"
+    # create a table
+    markdown += "| File | Difference | Old Size | New Size |\n"
+    markdown += "| ---- | ---------- | -------- | -------- |\n"
+    for oldName, oldSize, newSize in improvements:
+        markdown += f"| `{oldName}` | **{oldSize - newSize}b** | {oldSize}b | {newSize}b |\n"
+
+if len(markdown) == 0:
+    markdown = "No changes in target sizes detected."
+
+g = Github(token)
+repo = g.get_repo(repo_name)
+pr = repo.get_pull(pr_number)
+
+existing_comment = None
+for comment in pr.get_issue_comments():
+    if comment.body.startswith(startMarkdown):
+        existing_comment = comment
+        break
+
+final_markdown = startMarkdown + markdown
+
+if existing_comment:
+    existing_comment.edit(body=final_markdown)
+else:
+    pr.create_issue_comment(body=final_markdown)