ESP32s3: Migrate variants to new structure (#7343)
This commit is contained in:
Austin
GitHub
@@ -0,0 +1,35 @@
|
||||
#pragma once
|
||||
|
||||
#include "configuration.h"
|
||||
|
||||
enum class EInkDetectionResult : uint8_t {
|
||||
LCMEN213EFC1 = 0, // Initial version
|
||||
E0213A367 = 1, // E213 PCB marked V1.1 (Mid 2025)
|
||||
};
|
||||
|
||||
EInkDetectionResult detectEInk()
|
||||
{
|
||||
// Test 1: Logic of BUSY pin
|
||||
|
||||
// Determines controller IC manufacturer
|
||||
// Fitipower: busy when LOW
|
||||
// Solomon Systech: busy when HIGH
|
||||
|
||||
// Force display BUSY by holding reset pin active
|
||||
pinMode(PIN_EINK_RES, OUTPUT);
|
||||
digitalWrite(PIN_EINK_RES, LOW);
|
||||
|
||||
delay(10);
|
||||
|
||||
// Read whether pin is HIGH or LOW while busy
|
||||
pinMode(PIN_EINK_BUSY, INPUT);
|
||||
bool busyLogic = digitalRead(PIN_EINK_BUSY);
|
||||
|
||||
// Test complete. Release pin
|
||||
pinMode(PIN_EINK_RES, INPUT);
|
||||
|
||||
if (busyLogic == LOW)
|
||||
return EInkDetectionResult::LCMEN213EFC1;
|
||||
else // busy HIGH
|
||||
return EInkDetectionResult::E0213A367;
|
||||
}
|
||||
@@ -0,0 +1,117 @@
|
||||
#pragma once
|
||||
|
||||
#include "configuration.h"
|
||||
|
||||
#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
|
||||
|
||||
// InkHUD-specific components
|
||||
// ---------------------------
|
||||
#include "graphics/niche/InkHUD/InkHUD.h"
|
||||
|
||||
// Applets
|
||||
#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
|
||||
#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
|
||||
|
||||
// Shared NicheGraphics components
|
||||
// --------------------------------
|
||||
#include "graphics/niche/Drivers/EInk/E0213A367.h"
|
||||
#include "graphics/niche/Drivers/EInk/LCMEN2R13EFC1.h"
|
||||
#include "graphics/niche/Inputs/TwoButton.h"
|
||||
|
||||
#include "buzz.h" // Button feedback
|
||||
#include "einkDetect.h" // Detect display model at runtime
|
||||
|
||||
void setupNicheGraphics()
|
||||
{
|
||||
using namespace NicheGraphics;
|
||||
|
||||
// Detect E-Ink Model
|
||||
// -------------------
|
||||
|
||||
EInkDetectionResult displayModel = detectEInk();
|
||||
|
||||
// SPI
|
||||
// -----------------------------
|
||||
|
||||
// Display is connected to HSPI
|
||||
SPIClass *hspi = new SPIClass(HSPI);
|
||||
hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
|
||||
|
||||
// E-Ink Driver
|
||||
// -----------------------------
|
||||
|
||||
Drivers::EInk *driver;
|
||||
|
||||
if (displayModel == EInkDetectionResult::LCMEN213EFC1) // V1 (unmarked)
|
||||
driver = new Drivers::LCMEN213EFC1;
|
||||
else if (displayModel == EInkDetectionResult::E0213A367) // V1.1
|
||||
driver = new Drivers::E0213A367;
|
||||
|
||||
driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
|
||||
|
||||
// InkHUD
|
||||
// ----------------------------
|
||||
|
||||
InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
|
||||
|
||||
// Set the E-Ink driver
|
||||
inkhud->setDriver(driver);
|
||||
|
||||
// Set how many FAST updates per FULL update
|
||||
// Set how unhealthy additional FAST updates beyond this number are
|
||||
|
||||
if (displayModel == EInkDetectionResult::LCMEN213EFC1) // V1 (unmarked)
|
||||
inkhud->setDisplayResilience(10, 1.5);
|
||||
else if (displayModel == EInkDetectionResult::E0213A367) // V1.1
|
||||
inkhud->setDisplayResilience(15, 3);
|
||||
|
||||
// Select fonts
|
||||
InkHUD::Applet::fontLarge = FREESANS_12PT_WIN1252;
|
||||
InkHUD::Applet::fontMedium = FREESANS_9PT_WIN1252;
|
||||
InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
|
||||
|
||||
// Customize default settings
|
||||
inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
|
||||
inkhud->persistence->settings.rotation = 3; // 270 degrees clockwise
|
||||
inkhud->persistence->settings.userTiles.count = 1; // One tile only by default, keep things simple for new users
|
||||
inkhud->persistence->settings.optionalMenuItems.nextTile = false; // Behavior handled by aux button instead
|
||||
|
||||
// Pick applets
|
||||
// Note: order of applets determines priority of "auto-show" feature
|
||||
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
|
||||
inkhud->addApplet("DMs", new InkHUD::DMApplet); // -
|
||||
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0)); // -
|
||||
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1)); // -
|
||||
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true); // Activated
|
||||
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet); // -
|
||||
inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0); // Activated, not autoshown, default on tile 0
|
||||
|
||||
// Start running InkHUD
|
||||
inkhud->begin();
|
||||
|
||||
// Buttons
|
||||
// --------------------------
|
||||
|
||||
Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
|
||||
|
||||
// #0: Main User Button
|
||||
buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
|
||||
buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
|
||||
buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
|
||||
|
||||
// #1: Aux Button
|
||||
buttons->setWiring(1, PIN_BUTTON2);
|
||||
buttons->setHandlerShortPress(1, [inkhud]() {
|
||||
inkhud->nextTile();
|
||||
playChirp();
|
||||
});
|
||||
|
||||
// Begin handling button events
|
||||
buttons->start();
|
||||
}
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,61 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant
|
||||
#define BUILTIN_LED LED_BUILTIN // Backward compatibility
|
||||
#define LED_BUILTIN LED_BUILTIN
|
||||
|
||||
static const uint8_t TX = 43;
|
||||
static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 39;
|
||||
static const uint8_t SCL = 38;
|
||||
|
||||
static const uint8_t SS = 8;
|
||||
static const uint8_t MOSI = 10;
|
||||
static const uint8_t MISO = 11;
|
||||
static const uint8_t SCK = 9;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
static const uint8_t RST_LoRa = 12;
|
||||
static const uint8_t BUSY_LoRa = 13;
|
||||
static const uint8_t DIO1 = 14;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
@@ -0,0 +1,39 @@
|
||||
[env:heltec-vision-master-e213]
|
||||
extends = esp32s3_base
|
||||
board = heltec_vision_master_e213
|
||||
board_build.partitions = default_8MB.csv
|
||||
build_flags =
|
||||
${esp32s3_base.build_flags}
|
||||
-Ivariants/esp32s3/heltec_vision_master_e213
|
||||
-DHELTEC_VISION_MASTER_E213
|
||||
-DUSE_EINK
|
||||
-DGXEPD2_DRIVER_0=GxEPD2_213_FC1
|
||||
-DGXEPD2_DRIVER_1=GxEPD2_213_E0213A367
|
||||
-DEINK_WIDTH=250
|
||||
-DEINK_HEIGHT=122
|
||||
-DUSE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
|
||||
-DEINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted
|
||||
-DEINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
|
||||
-DEINK_HASQUIRK_GHOSTING ; Display model is identified as "prone to ghosting"
|
||||
lib_deps =
|
||||
${esp32s3_base.lib_deps}
|
||||
https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
|
||||
lewisxhe/PCF8563_Library@^1.0.1
|
||||
upload_speed = 115200
|
||||
|
||||
[env:heltec-vision-master-e213-inkhud]
|
||||
extends = esp32s3_base, inkhud
|
||||
board = heltec_vision_master_e213
|
||||
board_build.partitions = default_8MB.csv
|
||||
build_src_filter =
|
||||
${esp32_base.build_src_filter}
|
||||
${inkhud.build_src_filter}
|
||||
build_flags =
|
||||
${esp32s3_base.build_flags}
|
||||
${inkhud.build_flags}
|
||||
-I variants/esp32s3/heltec_vision_master_e213
|
||||
-D HELTEC_VISION_MASTER_E213
|
||||
lib_deps =
|
||||
${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
|
||||
${esp32s3_base.lib_deps}
|
||||
upload_speed = 921600
|
||||
@@ -0,0 +1,54 @@
|
||||
#define LED_PIN 45 // LED is not populated on earliest board variant
|
||||
#define BUTTON_PIN 0
|
||||
#define PIN_BUTTON2 21 // Second built-in button
|
||||
#define ALT_BUTTON_PIN PIN_BUTTON2 // Send the up event
|
||||
|
||||
// I2C
|
||||
#define I2C_SDA SDA
|
||||
#define I2C_SCL SCL
|
||||
|
||||
// Display (E-Ink)
|
||||
#define PIN_EINK_CS 5
|
||||
#define PIN_EINK_BUSY 1
|
||||
#define PIN_EINK_DC 2
|
||||
#define PIN_EINK_RES 3
|
||||
#define PIN_EINK_SCLK 4
|
||||
#define PIN_EINK_MOSI 6
|
||||
|
||||
// SPI
|
||||
#define SPI_INTERFACES_COUNT 2
|
||||
#define PIN_SPI_MISO 11
|
||||
#define PIN_SPI_MOSI 10
|
||||
#define PIN_SPI_SCK 9
|
||||
|
||||
// Power
|
||||
#define VEXT_ENABLE 18 // Powers the E-Ink display, and the 3.3V supply to the I2C QuickLink connector
|
||||
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
|
||||
#define VEXT_ON_VALUE HIGH
|
||||
#define ADC_CTRL 46
|
||||
#define ADC_CTRL_ENABLED HIGH
|
||||
#define BATTERY_PIN 7
|
||||
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
|
||||
#define ADC_MULTIPLIER 4.9 * 1.03
|
||||
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5
|
||||
|
||||
// LoRa
|
||||
#define USE_SX1262
|
||||
|
||||
#define LORA_DIO0 RADIOLIB_NC // a No connect on the SX1262 module
|
||||
#define LORA_RESET 12
|
||||
#define LORA_DIO1 14 // SX1262 IRQ
|
||||
#define LORA_DIO2 13 // SX1262 BUSY
|
||||
|
||||
#define LORA_SCK 9
|
||||
#define LORA_MISO 11
|
||||
#define LORA_MOSI 10
|
||||
#define LORA_CS 8
|
||||
|
||||
#define SX126X_CS LORA_CS
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
Reference in New Issue
Block a user