ESP32s3: Migrate variants to new structure (#7343)

2025-07-20 16:47:37 -05:00
parent b851b15a73
commit 475cfe4af2
127 changed files with 126 additions and 101 deletions
@@ -0,0 +1,42 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// Now declared in .platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h
+// #define NUM_ANALOG_INPUTS 20
+// #define EXTERNAL_NUM_INTERRUPTS 46
+// #define NUM_DIGITAL_PINS 48
+// #define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
+// #define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1)
+// #define digitalPinHasPWM(p) (p < 46)
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 42;
+static const uint8_t SCL = 41;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 10;
+static const uint8_t MOSI = 11;
+static const uint8_t MISO = 13;
+static const uint8_t SCK = 12;
+
+// Another SPI bus shares SD card and QMI8653 inertial measurement sensor
+#define SPI_MOSI (35)
+#define SPI_SCK (36)
+#define SPI_MISO (37)
+#define SPI_CS (47)
+#define IMU_CS (34)
+
+#define SDCARD_CS SPI_CS
+#define IMU_INT (33)
+// #define PMU_IRQ                  (40)
+#define RTC_INT (14)
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,15 @@
+; The 1.0 release of the LilyGo TBEAM-S3-Core board 
+[env:tbeam-s3-core]
+extends = esp32s3_base
+board = tbeam-s3-core
+board_build.partitions = default_8MB.csv
+board_check = true
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  lewisxhe/PCF8563_Library@1.0.1
+
+build_flags = 
+  ${esp32s3_base.build_flags} 
+  -I variants/esp32s3/tbeam-s3-core
+  -D PCF8563_RTC=0x51 ;Putting definitions in variant.h does not compile correctly
@@ -0,0 +1,67 @@
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+
+#define I2C_SDA1 42 // Used for PMU management and PCF8563
+#define I2C_SCL1 41 // Used for PMU management and PCF8563
+
+#define I2C_SDA 17 // For QMC6310 sensors and screens
+#define I2C_SCL 18 // For QMC6310 sensors and screens
+
+#define BUTTON_PIN 0 // The middle button GPIO on the T-Beam S3
+//  #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
+
+#define LED_STATE_ON 0 // State when LED is lit
+
+// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
+// not found then probe for SX1262
+#define USE_SX1262
+#define USE_SX1268
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 5
+#define LORA_DIO1 1 // SX1262 IRQ
+#define LORA_DIO2 4 // SX1262 BUSY
+#define LORA_DIO3   // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#ifdef USE_SX1262
+#define SX126X_CS 10 // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+// Not really an E22 but TTGO seems to be trying to clone that
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
+// code)
+#endif
+
+// Leave undefined to disable our PMU IRQ handler.  DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
+// and waking from light sleep
+// #define PMU_IRQ 40
+#define HAS_AXP2101
+
+#define HAS_RTC 1
+
+// Specify the PMU as Wire1. In the t-beam-s3 core, PCF8563 and PMU share the bus
+#define PMU_USE_WIRE1
+#define RTC_USE_WIRE1
+
+#define LORA_SCK 12
+#define LORA_MISO 13
+#define LORA_MOSI 11
+#define LORA_CS 10
+
+#define GPS_RX_PIN 9
+#define GPS_TX_PIN 8
+#define GPS_WAKEUP_PIN 7
+#define GPS_1PPS_PIN 6
+
+#define HAS_SDCARD // Have SPI interface SD card slot
+#define SDCARD_USE_SPI1
+
+// PCF8563 RTC Module
+// #define PCF8563_RTC 0x51         //Putting definitions in variant. h does not compile correctly
+
+// has 32768 Hz crystal
+#define HAS_32768HZ
+
+#define USE_SH1106