Merge remote-tracking branch 'origin/master' into develop

.github/ISSUE_TEMPLATE/Bug Report.yml

@@ -75,11 +75,11 @@ body:
   - type: checkboxes
     id: mui
     attributes:
-      label: Is this bug report about any UI component firmware like InkHUD or Meshtatic UI (MUI)?
+      label: Is this bug report about any UI (https://meshtastic.org/docs/configuration/device-uis/) component firmware?
       options:
-        - label: Meshtastic UI aka MUI colorTFT
+        - label: Meshtastic UI aka MUI
-        - label: InkHUD ePaper
+        - label: InkHUD
-        - label: OLED slide UI on any display
+        - label: BaseUI
 
   - type: input
     id: version

.trunk/trunk.yaml

@@ -8,15 +8,15 @@ plugins:
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - checkov@3.2.517
+    - checkov@3.2.524
-    - renovate@43.110.9
+    - renovate@43.139.2
-    - prettier@3.8.1
+    - prettier@3.8.3
-    - trufflehog@3.94.3
+    - trufflehog@3.95.2
     - yamllint@1.38.0
     - bandit@1.9.4
-    - trivy@0.69.3
+    - trivy@0.70.0
     - taplo@0.10.0
-    - ruff@0.15.9
+    - ruff@0.15.11
     - isort@8.0.1
     - markdownlint@0.48.0
     - oxipng@10.1.0

src/main.cpp

@@ -340,138 +340,9 @@ void setup()
 
 #ifdef BLE_LED
     pinMode(BLE_LED, OUTPUT);
-#ifdef BLE_LED_INVERTED
-    digitalWrite(BLE_LED, HIGH);
-#else
-    digitalWrite(BLE_LED, LOW);
-#endif
-#endif
-
-#if defined(T_DECK)
-    // GPIO10 manages all peripheral power supplies
-    // Turn on peripheral power immediately after MUC starts.
-    // If some boards are turned on late, ESP32 will reset due to low voltage.
-    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
-    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
-    pinMode(KB_POWERON, OUTPUT);
-    digitalWrite(KB_POWERON, HIGH);
-    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
-    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
-    // e.g. when detecting the SD card
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(TFT_CS, OUTPUT);
-    digitalWrite(TFT_CS, HIGH);
-    delay(100);
-#elif defined(T_DECK_PRO)
-    pinMode(LORA_EN, OUTPUT);
-    digitalWrite(LORA_EN, HIGH);
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(PIN_EINK_CS, OUTPUT);
-    digitalWrite(PIN_EINK_CS, HIGH);
-#if PIN_EINK_RES >= 0
-    pinMode(PIN_EINK_RES, OUTPUT);
-    digitalWrite(PIN_EINK_RES, HIGH);
-#endif
-    pinMode(CST328_PIN_RST, OUTPUT);
-    digitalWrite(CST328_PIN_RST, HIGH);
-#elif defined(T_LORA_PAGER)
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(TFT_CS, OUTPUT);
-    digitalWrite(TFT_CS, HIGH);
-    pinMode(KB_INT, INPUT_PULLUP);
-    // io expander
-    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
-    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
-    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_AMP_EN, LOW);
-    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
-    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
-    io.pinMode(EXPANDS_KB_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_KB_EN, HIGH);
-    io.pinMode(EXPANDS_SD_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_SD_EN, HIGH);
-    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
-    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
-#elif defined(HACKADAY_COMMUNICATOR)
-    pinMode(KB_INT, INPUT);
     digitalWrite(BLE_LED, LED_STATE_OFF);
 #endif
 
-#if defined(T_DECK)
-    // GPIO10 manages all peripheral power supplies
-    // Turn on peripheral power immediately after MUC starts.
-    // If some boards are turned on late, ESP32 will reset due to low voltage.
-    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
-    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
-    pinMode(KB_POWERON, OUTPUT);
-    digitalWrite(KB_POWERON, HIGH);
-    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
-    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
-    // e.g. when detecting the SD card
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(TFT_CS, OUTPUT);
-    digitalWrite(TFT_CS, HIGH);
-    delay(100);
-#elif defined(T_DECK_PRO)
-    pinMode(LORA_EN, OUTPUT);
-    digitalWrite(LORA_EN, HIGH);
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(PIN_EINK_CS, OUTPUT);
-    digitalWrite(PIN_EINK_CS, HIGH);
-#if PIN_EINK_RES >= 0
-    pinMode(PIN_EINK_RES, OUTPUT);
-    digitalWrite(PIN_EINK_RES, HIGH);
-#endif
-    pinMode(CST328_PIN_RST, OUTPUT);
-    digitalWrite(CST328_PIN_RST, HIGH);
-#elif defined(T_LORA_PAGER)
-    pinMode(LORA_CS, OUTPUT);
-    digitalWrite(LORA_CS, HIGH);
-    pinMode(SDCARD_CS, OUTPUT);
-    digitalWrite(SDCARD_CS, HIGH);
-    pinMode(TFT_CS, OUTPUT);
-    digitalWrite(TFT_CS, HIGH);
-    pinMode(KB_INT, INPUT_PULLUP);
-    // io expander
-    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
-    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
-    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_AMP_EN, LOW);
-    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
-    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
-    io.pinMode(EXPANDS_KB_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_KB_EN, HIGH);
-    io.pinMode(EXPANDS_SD_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_SD_EN, HIGH);
-    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
-    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
-    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
-#elif defined(HACKADAY_COMMUNICATOR)
-    pinMode(KB_INT, INPUT);
-#endif
-
     concurrency::hasBeenSetup = true;
 #if HAS_SCREEN
     meshtastic_Config_DisplayConfig_OledType screen_model =

variants/esp32/chatter2/platformio.ini

@@ -12,4 +12,4 @@ build_flags =
 lib_deps =
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20

variants/esp32/m5stack_core/platformio.ini

@@ -35,4 +35,4 @@ lib_ignore =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20

variants/esp32/m5stack_coreink/platformio.ini

@@ -19,7 +19,7 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4
 lib_ignore =

variants/esp32/wiphone/platformio.ini

@@ -11,7 +11,7 @@ build_flags =
 lib_deps = 
   ${esp32_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
   # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
   sparkfun/SX1509 IO Expander@3.0.6
   # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102

variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini

@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
 build_unflags =
   ${esp32s3_base.build_unflags}
   -DARDUINO_USB_MODE=1

variants/esp32s3/esp32-s3-pico/platformio.ini

@@ -23,4 +23,4 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9

variants/esp32s3/heltec_v4/platformio.ini

@@ -131,6 +131,6 @@ build_flags =
 lib_deps = ${heltec_v4_base.lib_deps}
   ${device-ui_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
   # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
   https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip

variants/esp32s3/heltec_wireless_tracker/platformio.ini

@@ -24,4 +24,4 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20

variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini

@@ -22,4 +22,4 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20

variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini

@@ -21,4 +21,4 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20

variants/esp32s3/mesh-tab/platformio.ini

@@ -55,7 +55,7 @@ lib_deps =
   ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
 
 [mesh_tab_xpt2046]
 extends = mesh_tab_base

variants/esp32s3/picomputer-s3/platformio.ini

@@ -25,7 +25,7 @@ build_flags =
 lib_deps = 
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
 
 build_src_filter =
   ${esp32s3_base.build_src_filter}

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -37,7 +37,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
 
 [env:rak_wismesh_tap_v2-tft]
 extends = env:rak_wismesh_tap_v2

variants/esp32s3/t-deck-pro-v1_1/platformio.ini

@@ -30,7 +30,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
   # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328

variants/esp32s3/t-deck-pro/platformio.ini

@@ -34,7 +34,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
   # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
   https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
   # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328

variants/esp32s3/t-deck/platformio.ini

@@ -29,7 +29,7 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
   # renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
   https://github.com/meshtastic/ESP8266Audio/archive/343024632ee78d6216907b2353fc943a62422d80.zip
   # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM

variants/esp32s3/t-watch-s3/platformio.ini

@@ -22,7 +22,7 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
   # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
   lewisxhe/SensorLib@0.3.4
   # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library

variants/esp32s3/t5s3_epaper/variant.cpp

@@ -1,6 +1,130 @@
-#include "variant.h"
+#include "configuration.h"
-#include "Arduino.h"
+
-#include "pins_arduino.h"
+#ifdef T5_S3_EPAPER_PRO
+
+#include "Observer.h"
+#include "TouchDrvGT911.hpp"
+#include "Wire.h"
+#include "input/InputBroker.h"
+#include "input/TouchScreenImpl1.h"
+#include "sleep.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+#include "graphics/niche/InkHUD/InkHUD.h"
+#include "graphics/niche/InkHUD/SystemApplet.h"
+
+// Bridges touch events from TouchScreenImpl1 directly into InkHUD,
+// bypassing the InputBroker (which is excluded in InkHUD builds).
+// Routing mirrors the mini-epaper-s3 two-way rocker pattern:
+//   - Nav left/right: prevApplet/nextApplet when idle, navUp/Down when a system applet has focus (e.g. menu)
+//   - Nav up/down:    navUp/navDown always (menu scroll)
+//   - Tap:            shortpress (cycle applets / confirm in menu)
+//   - Long press:     longpress (open menu / back)
+class TouchInkHUDBridge : public Observer<const InputEvent *>
+{
+    int onNotify(const InputEvent *e) override
+    {
+        auto *inkhud = NicheGraphics::InkHUD::InkHUD::getInstance();
+
+        // Keep alignment in sync with the current rotation so that visual-frame gestures
+        // always pass through nav functions without remapping: (rotation + alignment) % 4 == 0.
+        inkhud->persistence->settings.joystick.alignment = (4 - inkhud->persistence->settings.rotation) % 4;
+
+        // Check whether a system applet (e.g. menu) is currently handling input
+        bool systemHandlingInput = false;
+        for (NicheGraphics::InkHUD::SystemApplet *sa : inkhud->systemApplets) {
+            if (sa->handleInput) {
+                systemHandlingInput = true;
+                break;
+            }
+        }
+
+        switch (e->inputEvent) {
+        case INPUT_BROKER_USER_PRESS:
+            inkhud->shortpress();
+            break;
+        case INPUT_BROKER_SELECT:
+            inkhud->longpress();
+            break;
+        case INPUT_BROKER_LEFT:
+            if (systemHandlingInput)
+                inkhud->navUp();
+            else
+                inkhud->prevApplet();
+            break;
+        case INPUT_BROKER_RIGHT:
+            if (systemHandlingInput)
+                inkhud->navDown();
+            else
+                inkhud->nextApplet();
+            break;
+        case INPUT_BROKER_UP:
+            inkhud->navUp();
+            break;
+        case INPUT_BROKER_DOWN:
+            inkhud->navDown();
+            break;
+        default:
+            break;
+        }
+        return 0;
+    }
+};
+
+static TouchInkHUDBridge touchBridge;
+#endif // MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+TouchDrvGT911 touch;
+
+// Commands the GT911 into standby before the Wire bus is torn down.
+// notifyDeepSleep fires before Wire.end() in doDeepSleep(), so I2C is still available here.
+struct TouchDeepSleepObserver {
+    int onDeepSleep(void *)
+    {
+        touch.sleep();
+        return 0;
+    }
+    CallbackObserver<TouchDeepSleepObserver, void *> observer{this, &TouchDeepSleepObserver::onDeepSleep};
+} static touchDeepSleepObserver;
+
+bool readTouch(int16_t *x, int16_t *y)
+{
+    if (!digitalRead(GT911_PIN_INT)) {
+        int16_t raw_x;
+        int16_t raw_y;
+        if (touch.getPoint(&raw_x, &raw_y)) {
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+            // Transform raw GT911 axes to visual-frame coordinates for the current display rotation.
+            // rotation=3 is the physical identity (device's default orientation).
+            switch (NicheGraphics::InkHUD::InkHUD::getInstance()->persistence->settings.rotation) {
+            default:
+            case 3:
+                *x = raw_x;
+                *y = raw_y;
+                break; // identity
+            case 2:
+                *x = (EPD_WIDTH - 1) - raw_y;
+                *y = raw_x;
+                break; // 90° CW tilt
+            case 1:
+                *x = (EPD_HEIGHT - 1) - raw_x;
+                *y = (EPD_WIDTH - 1) - raw_y;
+                break; // 180° flip
+            case 0:
+                *x = raw_y;
+                *y = (EPD_HEIGHT - 1) - raw_x;
+                break; // 90° CCW tilt
+            }
+#else
+            *x = raw_x;
+            *y = raw_y;
+#endif
+            LOG_DEBUG("touched(%d/%d)", *x, *y);
+            return true;
+        }
+    }
+    return false;
+}
 
 void earlyInitVariant()
 {
@@ -37,3 +161,19 @@ void variant_shutdown()
     // Ensure frontlight is off during deep sleep
     digitalWrite(BOARD_BL_EN, LOW);
 }
+
+void lateInitVariant()
+{
+    touch.setPins(GT911_PIN_RST, GT911_PIN_INT);
+    if (touch.begin(Wire, GT911_SLAVE_ADDRESS_H, GT911_PIN_SDA, GT911_PIN_SCL)) {
+        touchDeepSleepObserver.observer.observe(&notifyDeepSleep);
+        touchScreenImpl1 = new TouchScreenImpl1(EPD_WIDTH, EPD_HEIGHT, readTouch);
+        touchScreenImpl1->init();
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+        touchBridge.observe(touchScreenImpl1);
+#endif
+    } else {
+        LOG_ERROR("Failed to find touch controller!");
+    }
+}
+#endif

variants/esp32s3/tlora-pager/platformio.ini

@@ -33,7 +33,7 @@ build_flags = ${esp32s3_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
   # renovate: datasource=git-refs depName=ESP8266Audio packageName=https://github.com/meshtastic/ESP8266Audio gitBranch=meshtastic-2.0.0-dacfix
   https://github.com/meshtastic/ESP8266Audio/archive/343024632ee78d6216907b2353fc943a62422d80.zip
   # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM

variants/esp32s3/tracksenger/platformio.ini

@@ -22,7 +22,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
 
 [env:tracksenger-lcd]
 custom_meshtastic_hw_model = 48
@@ -48,7 +48,7 @@ build_flags =
 lib_deps =
   ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
 
 [env:tracksenger-oled]
 custom_meshtastic_hw_model = 48

variants/esp32s3/unphone/platformio.ini

@@ -37,7 +37,7 @@ build_src_filter =
 
 lib_deps = ${esp32s3_base.lib_deps}
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
   # TODO renovate https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
   https://gitlab.com/hamishcunningham/unphonelibrary/-/archive/meshtastic/unphonelibrary-meshtastic.zip
 

variants/native/portduino.ini

@@ -27,7 +27,7 @@ lib_deps =
   # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
   rweather/Crypto@0.4.0
   # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.19
+  lovyan03/LovyanGFX@1.2.20
   ; # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
   https://github.com/pine64/libch341-spi-userspace/archive/23c42319a69cffcb65868e3c72e6bed83974a393.zip
   # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library

variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini

@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
 debug_tool = jlink

variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini

@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1

variants/nrf52840/MakePython_nRF52840_eink/platformio.ini

@@ -15,6 +15,6 @@ lib_deps =
   # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
   https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4

variants/nrf52840/TWC_mesh_v4/platformio.ini

@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
 debug_tool = jlink

variants/nrf52840/rak4631_epaper/platformio.ini

@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library

variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini

@@ -18,7 +18,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
   ${nrf52840_base.lib_deps}
   # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.8
+  zinggjm/GxEPD2@1.6.9
   # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
   melopero/Melopero RV3028@1.2.0
   # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library