kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 5 Packages Projects Releases Wiki Activity

trunk roundhouse kick

Browse Source
This commit is contained in:
Thomas Göttgens
2023-01-21 21:23:24 +01:00
parent 6cf18b7d07
commit 51b2c431d9
234 changed files with 4989 additions and 5101 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/Dongle_nRF52840-pca10059-v1/variant.cpp
+11 -16
View File
@@ -16,28 +16,23 @@
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47};
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
}
variants/Dongle_nRF52840-pca10059-v1/variant.h
+35 -36
View File
@@ -43,13 +43,13 @@ extern "C" {
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (0 + 12) // Blue LED P1.12
#define PIN_LED2 (0 + 6) // Built in Green P0.06
#define PIN_LED1 (0 + 12) // Blue LED P1.12
#define PIN_LED2 (0 + 6) // Built in Green P0.06
//Green Built in LED1
// Green Built in LED1
//#define PIN_LED1 (0 + 6) // LED1 P1.15
//RGB NeoPixel LED2
// RGB NeoPixel LED2
//#define PIN_LED1 (0 + 8) Red
//#define PIN_LED1 (32 + 9) Green
//#define PIN_LED1 (0 + 12) Blue
@@ -60,25 +60,24 @@ extern "C" {
#define LED_GREEN PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 0 // State when LED is litted
#define LED_STATE_ON 0 // State when LED is litted
/*
* Buttons
*/
#define PIN_BUTTON1 (32 + 6) // BTN_DN P1.06 Built in button
#define PIN_BUTTON1 (32 + 6) // BTN_DN P1.06 Built in button
/*
* Analog pins
*/
#define PIN_A0 (-1)
#define PIN_A0 (-1)
static const uint8_t A0 = PIN_A0;
#define ADC_RESOLUTION 14
// Other pins
#define PIN_AREF (-1) // AREF Not yet used
#define PIN_AREF (-1) // AREF Not yet used
static const uint8_t AREF = PIN_AREF;
@@ -97,31 +96,31 @@ static const uint8_t AREF = PIN_AREF;
*/
#define SPI_INTERFACES_COUNT 2
#define PIN_SPI_MISO (0 + 17) // MISO P0.17
#define PIN_SPI_MOSI (0 + 15) // MOSI P0.15
#define PIN_SPI_SCK (0 + 13) // SCK P0.13
#define PIN_SPI_MISO (0 + 17) // MISO P0.17
#define PIN_SPI_MOSI (0 + 15) // MOSI P0.15
#define PIN_SPI_SCK (0 + 13) // SCK P0.13
#define PIN_SPI1_MISO (-1) //
#define PIN_SPI1_MOSI (10) // EPD_MOSI P0.10
#define PIN_SPI1_SCK (9) // EPD_SCLK P0.09
#define PIN_SPI1_MISO (-1) //
#define PIN_SPI1_MOSI (10) // EPD_MOSI P0.10
#define PIN_SPI1_SCK (9) // EPD_SCLK P0.09
static const uint8_t SS = (0 + 31); // LORA_CS P0.31
static const uint8_t SS = (0 + 31); // LORA_CS P0.31
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
/*
* eink display pins
*/
//#define PIN_EINK_EN (-1)
#define PIN_EINK_EN (0 + 6) // Turn on the Green built in LED
#define PIN_EINK_CS (32) // EPD_CS
#define PIN_EINK_BUSY (20) // EPD_BUSY
#define PIN_EINK_DC (24) // EPD_D/C
#define PIN_EINK_RES (-1) // Not Connected P0.22 available
#define PIN_EINK_SCLK (9) // EPD_SCLK
#define PIN_EINK_MOSI (10) // EPD_MOSI
#define PIN_EINK_EN (0 + 6) // Turn on the Green built in LED
#define PIN_EINK_CS (32) // EPD_CS
#define PIN_EINK_BUSY (20) // EPD_BUSY
#define PIN_EINK_DC (24) // EPD_D/C
#define PIN_EINK_RES (-1) // Not Connected P0.22 available
#define PIN_EINK_SCLK (9) // EPD_SCLK
#define PIN_EINK_MOSI (10) // EPD_MOSI
#define USE_EINK
@@ -130,21 +129,21 @@ static const uint8_t SCK = PIN_SPI_SCK;
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (32 + 4) // SDA
#define PIN_WIRE_SCL (32 + 7) // SCL
#define PIN_WIRE_SDA (32 + 4) // SDA
#define PIN_WIRE_SCL (32 + 7) // SCL
// NiceRF 868 LoRa module
#define USE_SX1262
#define SX126X_CS (0 + 31) // LORA_CS P0.31
#define SX126X_DIO1 (0 + 29) // DIO1 P0.29
#define SX126X_BUSY (0 + 2) // LORA_BUSY P0.02
#define SX126X_RESET (32 + 15) // LORA_RESET P1.15
#define SX126X_TXEN (32 + 13) // TXEN P1.13 NiceRF 868 dont use
#define SX126X_RXEN (32 + 10) // RXEN P1.10 NiceRF 868 dont use
#define SX126X_CS (0 + 31) // LORA_CS P0.31
#define SX126X_DIO1 (0 + 29) // DIO1 P0.29
#define SX126X_BUSY (0 + 2) // LORA_BUSY P0.02
#define SX126X_RESET (32 + 15) // LORA_RESET P1.15
#define SX126X_TXEN (32 + 13) // TXEN P1.13 NiceRF 868 dont use
#define SX126X_RXEN (32 + 10) // RXEN P1.10 NiceRF 868 dont use
#define SX126X_E22
#define PIN_GPS_EN (-1)
#define PIN_GPS_PPS (-1) // Pulse per second input from the GPS
#define PIN_GPS_EN (-1)
#define PIN_GPS_PPS (-1) // Pulse per second input from the GPS
#define GPS_RX_PIN PIN_SERIAL1_RX
#define GPS_TX_PIN PIN_SERIAL1_TX
@@ -166,7 +165,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP //REAL_VBAT_MV_PER_LSB
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
#ifdef __cplusplus
variants/betafpv_2400_tx_micro/variant.h
+16 -16
View File
@@ -1,34 +1,34 @@
//https://betafpv.com/products/elrs-micro-tx-module
// https://betafpv.com/products/elrs-micro-tx-module
#include <NeoPixelBus.h>
// 0.96" OLED
#define I2C_SDA 22
#define I2C_SCL 32
#define I2C_SDA 22
#define I2C_SCL 32
// NO GPS
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define RF95_SCK 18
#define RF95_MISO 19
#define RF95_MOSI 23
#define RF95_NSS 5
#define RF95_FAN_EN 17
#define RF95_SCK 18
#define RF95_MISO 19
#define RF95_MOSI 23
#define RF95_NSS 5
#define RF95_FAN_EN 17
#define LED_PIN 16 // This is a LED_WS2812 not a standard LED
#define LED_PIN 16 // This is a LED_WS2812 not a standard LED
#define BUTTON_PIN 25
#define BUTTON_PIN 25
#define BUTTON_NEED_PULLUP
#undef EXT_NOTIFY_OUT
// SX128X 2.4 Ghz LoRa module
#define USE_SX1280
#define LORA_RESET 14
#define SX128X_CS 5
#define SX128X_DIO1 4
#define SX128X_BUSY 21
#define SX128X_TXEN 26
#define SX128X_RXEN 27
#define LORA_RESET 14
#define SX128X_CS 5
#define SX128X_DIO1 4
#define SX128X_BUSY 21
#define SX128X_TXEN 26
#define SX128X_RXEN 27
#define SX128X_RESET LORA_RESET
#define SX128X_MAX_POWER 13
variants/diy/dr-dev/variant.h
+5 -6
View File
@@ -12,9 +12,9 @@
#define BUTTON_NEED_PULLUP
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LORA_DIO0 NOT_A_PIN // a No connect on the SX1262/SX1268 module
#define LORA_DIO0 NOT_A_PIN // a No connect on the SX1262/SX1268 module
#define LORA_RESET NOT_A_PIN // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO3 NOT_A_PIN // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
#define LORA_DIO3 NOT_A_PIN // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
// In transmitting, set TXEN as high communication level，RXEN pin is low level;
// In receiving, set RXEN as high communication level, TXEN is lowlevel;
@@ -29,16 +29,15 @@
// PINS FOR THE 900M22S
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
#define LORA_TXEN NOT_A_PIN // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#undef RF95_NSS
#define RF95_NSS 16
#define SX126X_BUSY 22
#define SX126X_CS 16
// PINS FOR THE 900M30S
/*
#define LORA_DIO1 27 // IRQ for SX1262/SX1268
variants/diy/v1/variant.h
+4 -4
View File
@@ -9,11 +9,11 @@
#define GPS_TX_PIN 15
#define GPS_UBLOX
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define LORA_DIO0 26 // a No connect on the SX1262/SX1268 module
#define LORA_RESET 23 // RST for SX1276, and for SX1262/SX1268
variants/diy/v1_1/variant.h
+2 -2
View File
@@ -19,8 +19,8 @@
// In transmitting, set TXEN as high communication level，RXEN pin is low level;
// In receiving, set RXEN as high communication level, TXEN is lowlevel;
// Before powering off, set TXEN、RXEN as low level.
#define LORA_RXEN 14 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_TXEN 13 // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#define LORA_RXEN 14 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_TXEN 13 // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#undef RF95_SCK
#define RF95_SCK 18
variants/feather_diy/variant.h
+17 -17
View File
@@ -43,11 +43,11 @@ extern "C" {
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (0 + 12) //P0.12 22
#define PIN_WIRE_SCL (0 + 11) //P0.12 23
#define PIN_WIRE_SDA (0 + 12) // P0.12 22
#define PIN_WIRE_SCL (0 + 11) // P0.12 23
#define PIN_LED1 (32 + 15) //P1.15 3
#define PIN_LED2 (32 + 10) //P1.10 4
#define PIN_LED1 (32 + 15) // P1.15 3
#define PIN_LED2 (32 + 10) // P1.10 4
#define LED_BUILTIN PIN_LED1
@@ -56,30 +56,30 @@ extern "C" {
#define LED_STATE_ON 1 // State when LED is litted
#define BUTTON_PIN (32 + 2) //P1.02 7
#define BUTTON_PIN (32 + 2) // P1.02 7
/*
* Serial interfaces
*/
#define PIN_SERIAL1_RX (0 + 24) //P0.24 1
#define PIN_SERIAL1_TX (0 + 25) //P0.25 0
#define PIN_SERIAL1_RX (0 + 24) // P0.24 1
#define PIN_SERIAL1_TX (0 + 25) // P0.25 0
#define PIN_SERIAL2_RX (-1)
#define PIN_SERIAL2_TX (-1)
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (0 + 15) //P0.15 24
#define PIN_SPI_MOSI (0 + 13) //P0.13 25
#define PIN_SPI_SCK (0 + 14) //P0.14 26
#define PIN_SPI_MISO (0 + 15) // P0.15 24
#define PIN_SPI_MOSI (0 + 13) // P0.13 25
#define PIN_SPI_SCK (0 + 14) // P0.14 26
#define SS 2
#define LORA_DIO0 -1 // a No connect on the SX1262/SX1268 module
#define LORA_RESET (32 + 9) //P1.09 13 // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO1 (0 + 6) //P0.06 11 // IRQ for SX1262/SX1268
#define LORA_DIO2 (0 + 8) //P0.08 12 // BUSY for SX1262/SX1268
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
#define LORA_DIO0 -1 // a No connect on the SX1262/SX1268 module
#define LORA_RESET (32 + 9) // P1.09 13 // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO1 (0 + 6) // P0.06 11 // IRQ for SX1262/SX1268
#define LORA_DIO2 (0 + 8) // P0.08 12 // BUSY for SX1262/SX1268
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
#define RF95_SCK SCK
#define RF95_MISO MI
@@ -99,8 +99,8 @@ extern "C" {
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_RXEN (0 + 27) //P0.27 10
#define SX126X_TXEN (0 + 26) //P0.26 9
#define SX126X_RXEN (0 + 27) // P0.27 10
#define SX126X_TXEN (0 + 26) // P0.26 9
#ifdef EBYTE_E22
// Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
variants/heltec_v1/variant.h
+2 -2
View File
@@ -12,8 +12,8 @@
#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define USE_RF95
#define LORA_DIO0 26 // a No connect on the SX1262 module
variants/heltec_v2.1/variant.h
+1 -1
View File
@@ -29,5 +29,5 @@
#define ADC_MULTIPLIER 3.8
#define BATTERY_PIN 37 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BATTERY_PIN 37 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
variants/heltec_v2/variant.h
-1
View File
@@ -27,4 +27,3 @@
// ratio of voltage divider = 3.20 (R12=100k, R10=220k)
#define ADC_MULTIPLIER 3.2
#define BATTERY_PIN 13 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
variants/heltec_v3/variant.h
+13 -13
View File
@@ -12,19 +12,19 @@
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define RF95_SCK 9
#define RF95_MISO 11
#define RF95_MOSI 10
#define RF95_NSS 8
#define RF95_SCK 9
#define RF95_MISO 11
#define RF95_MOSI 10
#define RF95_NSS 8
#define SX126X_CS RF95_NSS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_CS RF95_NSS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
variants/heltec_wsl_v3/variant.h
+13 -13
View File
@@ -10,19 +10,19 @@
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define RF95_SCK 9
#define RF95_MISO 11
#define RF95_MOSI 10
#define RF95_NSS 8
#define RF95_SCK 9
#define RF95_MISO 11
#define RF95_MOSI 10
#define RF95_NSS 8
#define SX126X_CS RF95_NSS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_CS RF95_NSS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22
variants/lora_isp4520/variant.cpp
+6 -6
View File
@@ -25,7 +25,7 @@
const uint32_t g_ADigitalPinMap[] = {
25, // D0 SPI_MISO
24, // D1 SPI_NSS
24, // D1 SPI_NSS
23, // D2 SPI_SCK
4, // D3 VBAT
11, // D4 DIO1
@@ -39,14 +39,14 @@ const uint32_t g_ADigitalPinMap[] = {
10, // D12 LED1 GREEN
17, // D13 LED2 RED
9, // D14 BUZZER
7, // D15 BUTTON1
7, // D15 BUTTON1
};
#include <initializer_list>
void initVariant()
{
for (int i : {PIN_LED1, PIN_LED2}) {
pinMode(i, OUTPUT);
ledOff(i);
}
for (int i : {PIN_LED1, PIN_LED2}) {
pinMode(i, OUTPUT);
ledOff(i);
}
}
variants/lora_isp4520/variant.h
+5 -5
View File
@@ -33,7 +33,7 @@
// Number of pins defined in PinDescription array
#define PINS_COUNT (16)
#define NUM_DIGITAL_PINS (16)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (1)
/*
@@ -41,7 +41,7 @@
*/
#define SPI_INTERFACES_COUNT 1
// These are in arduino pin numbers,
// These are in arduino pin numbers,
// translation in g_ADigitalPinMap in variants.cpp
#define PIN_SPI_MISO (0)
#define PIN_SPI_MOSI (9)
@@ -54,9 +54,9 @@
// GPIOs the SX1262 is connected
#define USE_SX1262
#define SX126X_CS 1 // aka SPI_NSS
#define SX126X_CS 1 // aka SPI_NSS
#define SX126X_DIO1 (4)
#define SX126X_BUSY (5)
#define SX126X_BUSY (5)
#define SX126X_RESET (6)
/*
@@ -80,7 +80,7 @@
/*
* Buttons
*/
#define PIN_BUTTON1 (15)
#define PIN_BUTTON1 (15)
#define PIN_BUTTON2 (7)
#define PIN_BUTTON3 (8)
variants/lora_relay_v2/variant.cpp
+16 -16
View File
@@ -25,22 +25,22 @@
const uint32_t g_ADigitalPinMap[] = {
// D0 .. D13
25, // D0 is P0.25 (UART TX)
24, // D1 is P0.24 (UART RX
10, // D2 is P0.10 (NFC2)
47, // D3 is P1.15 (LED1)
25, // D0 is P0.25 (UART TX)
24, // D1 is P0.24 (UART RX
10, // D2 is P0.10 (NFC2)
47, // D3 is P1.15 (LED1)
(32 + 10), // D4 is P1.10 (LED2)
40, // D5 is P1.08
7, // D6 is P0.07
34, // D7 is P1.02 (Switch)
16, // D8 is P0.16 (NeoPixel)
26, // D9 is P0.26 D_RS (IPS data/command control)
27, // D10 is P0.27
6, // D11 is P0.06 D_RES (IPS display reset)
8, // D12 is P0.08 D_CS (IPS display chip select)
41, // D13 is P0.23 BLT (IPS display backlight)
4, // D14 is P0.04 SX1262 RXEN
5, // D15 is P0.05 BOOST_EN (5V buck converter enable for the the radio power)
40, // D5 is P1.08
7, // D6 is P0.07
34, // D7 is P1.02 (Switch)
16, // D8 is P0.16 (NeoPixel)
26, // D9 is P0.26 D_RS (IPS data/command control)
27, // D10 is P0.27
6, // D11 is P0.06 D_RES (IPS display reset)
8, // D12 is P0.08 D_CS (IPS display chip select)
41, // D13 is P0.23 BLT (IPS display backlight)
4, // D14 is P0.04 SX1262 RXEN
5, // D15 is P0.05 BOOST_EN (5V buck converter enable for the the radio power)
// D14 .. D21 (aka A0 .. A7)
30, // D16 is P0.30 (A0)
@@ -77,7 +77,7 @@ const uint32_t g_ADigitalPinMap[] = {
// 32, // P1.00 is SWO (attached to debug header)
// D29-D43
32 + 12, // D29 P0.27 E22-SX1262 DIO1
32 + 12, // D29 P0.27 E22-SX1262 DIO1
28, // D30 P0.28 E22-SX1262 DIO2
30, // D31 P0.30 E22-SX1262 TXEN
35, // D32 P1.03 E22-SX1262 NSS
variants/lora_relay_v2/variant.h
+1 -1
View File
@@ -164,7 +164,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define ST7735_SDA (39) // actually spi MOSI
#define ST7735_SCK (37) // actually spi clk
#define PIN_GPS_WAKE 36 // Just kill GPS power when we want it to sleep? FIXME
#define PIN_GPS_WAKE 36 // Just kill GPS power when we want it to sleep? FIXME
#define GPS_WAKE_ACTIVE 0 // GPS Power output is active low
// #define LORA_DISABLE_SENDING // The board can brownout during lora TX if you don't have a battery connected. Disable sending
variants/m5stack_core/pins_arduino.h
+9 -9
View File
@@ -4,12 +4,12 @@
#include <stdint.h>
#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS 20
#define NUM_ANALOG_INPUTS 16
#define NUM_DIGITAL_PINS 20
#define NUM_ANALOG_INPUTS 16
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<40)?(p):-1)
#define digitalPinHasPWM(p) (p < 34)
#define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
#define digitalPinToInterrupt(p) (((p) < 40) ? (p) : -1)
#define digitalPinHasPWM(p) (p < 34)
static const uint8_t TX = 1;
static const uint8_t RX = 3;
@@ -20,10 +20,10 @@ static const uint8_t RXD2 = 16;
static const uint8_t SDA = 21;
static const uint8_t SCL = 22;
static const uint8_t SS = 5;
static const uint8_t MOSI = 23;
static const uint8_t MISO = 19;
static const uint8_t SCK = 18;
static const uint8_t SS = 5;
static const uint8_t MOSI = 23;
static const uint8_t MISO = 19;
static const uint8_t SCK = 18;
static const uint8_t G23 = 23;
static const uint8_t G19 = 19;
variants/m5stack_core/variant.h
+2 -2
View File
@@ -25,8 +25,8 @@
#define USE_RF95
#define LORA_DIO0 36 // a No connect on the SX1262 module
#define LORA_RESET 26
#define LORA_DIO1 RADIOLIB_NC// Not really used
#define LORA_DIO2 RADIOLIB_NC// Not really used
#define LORA_DIO1 RADIOLIB_NC // Not really used
#define LORA_DIO2 RADIOLIB_NC // Not really used
// This board has different GPS pins than all other boards
#undef GPS_RX_PIN
variants/m5stack_coreink/pins_arduino.h
+9 -9
View File
@@ -4,12 +4,12 @@
#include <stdint.h>
#define EXTERNAL_NUM_INTERRUPTS 16
#define NUM_DIGITAL_PINS 40
#define NUM_ANALOG_INPUTS 16
#define NUM_DIGITAL_PINS 40
#define NUM_ANALOG_INPUTS 16
#define analogInputToDigitalPin(p) (((p)<20)?(esp32_adc2gpio[(p)]):-1)
#define digitalPinToInterrupt(p) (((p)<40)?(p):-1)
#define digitalPinHasPWM(p) (p < 34)
#define analogInputToDigitalPin(p) (((p) < 20) ? (esp32_adc2gpio[(p)]) : -1)
#define digitalPinToInterrupt(p) (((p) < 40) ? (p) : -1)
#define digitalPinHasPWM(p) (p < 34)
#define TX2 -1
#define RX2 -1
@@ -20,10 +20,10 @@ static const uint8_t RX = 3;
static const uint8_t SDA = 32;
static const uint8_t SCL = 33;
static const uint8_t SS = 9;
static const uint8_t MOSI = 23;
static const uint8_t MISO = 34;
static const uint8_t SCK = 18;
static const uint8_t SS = 9;
static const uint8_t MOSI = 23;
static const uint8_t MISO = 34;
static const uint8_t SCK = 18;
static const uint8_t G26 = 26;
static const uint8_t G36 = 36;
variants/m5stack_coreink/variant.h
+18 -18
View File
@@ -10,16 +10,16 @@
#define PCF8563_RTC 0x51
#define HAS_RTC 1
//Wheel
// Down 37
// Push 38
// Up 39
// Top Physical Button 5
// Wheel
// Down 37
// Push 38
// Up 39
// Top Physical Button 5
#define BUTTON_NEED_PULLUP
#define BUTTON_PIN 5
//BUZZER
// BUZZER
#define PIN_BUZZER 2
#undef RF95_SCK
@@ -28,10 +28,10 @@
#undef RF95_NSS
#define USE_RF95
#define RF95_SCK 18
#define RF95_SCK 18
#define RF95_MISO 34
#define RF95_MOSI 23
#define RF95_NSS 14
#define RF95_MOSI 23
#define RF95_NSS 14
#define LORA_DIO0 25
#define LORA_RESET 26
#define LORA_DIO1 RADIOLIB_NC
@@ -42,12 +42,12 @@
#undef GPS_TX_PIN
#define USE_EINK
//https://docs.m5stack.com/en/core/coreink
//https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/coreink/coreink_sch.pdf
#define PIN_EINK_EN -1 // N/C
#define PIN_EINK_CS 9 // EPD_CS
#define PIN_EINK_BUSY 4 // EPD_BUSY
#define PIN_EINK_DC 15 // EPD_D/C
#define PIN_EINK_RES -1 // Connected but not needed
#define PIN_EINK_SCLK 18 // EPD_SCLK
#define PIN_EINK_MOSI 23 // EPD_MOSI
// https://docs.m5stack.com/en/core/coreink
// https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/docs/schematic/Core/coreink/coreink_sch.pdf
#define PIN_EINK_EN -1 // N/C
#define PIN_EINK_CS 9 // EPD_CS
#define PIN_EINK_BUSY 4 // EPD_BUSY
#define PIN_EINK_DC 15 // EPD_D/C
#define PIN_EINK_RES -1 // Connected but not needed
#define PIN_EINK_SCLK 18 // EPD_SCLK
#define PIN_EINK_MOSI 23 // EPD_MOSI
variants/nano-g1/variant.h
+4 -3
View File
@@ -3,8 +3,9 @@
#define I2C_SDA 21
#define I2C_SCL 22
#define BUTTON_PIN 36 // The middle button GPIO on the Nano G1
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
#define BUTTON_PIN 36 // The middle button GPIO on the Nano G1
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented
// anywhere.
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
// common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
@@ -23,7 +24,7 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22
#define SX126X_E22 // Not really an E22
// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#endif
variants/pca10056-rc-clock/variant.cpp
+12 -19
View File
@@ -19,31 +19,24 @@
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
8 , 9 , 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47
};
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);;
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
;
}
variants/portduino/variant.h
+2 -3
View File
@@ -12,7 +12,7 @@
#define LORA_DIO0 26 // a No connect on the SX1262 module
#define LORA_RESET 14
#define LORA_DIO1 33 // SX1262 IRQ, called DIO0 on pinelora schematic, pin 7 on ch341f "ack" - FIXME, enable hwints in linux
#define LORA_DIO2 32 // SX1262 BUSY, actually connected to "DIO5" on pinelora schematic, pin 8 on ch341f "slct"
#define LORA_DIO2 32 // SX1262 BUSY, actually connected to "DIO5" on pinelora schematic, pin 8 on ch341f "slct"
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#ifdef USE_SX1262
@@ -20,6 +20,5 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
// HOPE RFM90 does not have a TCXO therefore not SX126X_E22
// HOPE RFM90 does not have a TCXO therefore not SX126X_E22
#endif
variants/ppr/variant.h
+1 -1
View File
@@ -138,7 +138,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
// #define SX126X_ANT_SW (32 + 10)
#define SX126X_RXEN (22)
#define SX126X_TXEN (24)
#define SX126X_E22 // Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
#define SX126X_E22 // Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
// ERC12864-10 LCD
#define ERC12864_CS (32 + 4)
variants/ppr1/variant.cpp
+1 -3
View File
@@ -25,9 +25,7 @@
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
30, 31,
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45};
variants/ppr1/variant.h
-1
View File
@@ -25,7 +25,6 @@
#define USE_LFXO // Board uses 32khz crystal for LF
// #define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
variants/rak11200/pins_arduino.h
+3 -3
View File
@@ -11,10 +11,10 @@
#define digitalPinToInterrupt(p) (((p) < 40) ? (p) : -1)
#define digitalPinHasPWM(p) (p < 34)
#define LED_GREEN 12
#define LED_BLUE 2
#define LED_GREEN 12
#define LED_BLUE 2
#define LED_BUILTIN LED_GREEN
#define LED_BUILTIN LED_GREEN
static const uint8_t TX = 1;
static const uint8_t RX = 3;
variants/rak11200/variant.h
+3 -2
View File
@@ -63,7 +63,8 @@ static const uint8_t SCK = 33;
#define LORA_RESET WB_IO4 // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO1 WB_IO6 // IRQ for SX1262/SX1268
#define LORA_DIO2 WB_IO5 // BUSY for SX1262/SX1268
#define LORA_DIO3 RADIOLIB_NC // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
#define LORA_DIO3 \
RADIOLIB_NC // Not connected on PCB, but internally on the TTGO SX1262/SX1268, if DIO3 is high the TXCO is enabled
#undef RF95_SCK
#define RF95_SCK SCK
@@ -75,7 +76,7 @@ static const uint8_t SCK = 33;
#define RF95_NSS SS
#define USE_SX1262
#define SX126X_CS SS// NSS for SX126X
#define SX126X_CS SS // NSS for SX126X
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
variants/rak4631/variant.cpp
+11 -16
View File
@@ -19,28 +19,23 @@
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47};
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
}
variants/rak4631/variant.h
+6 -7
View File
@@ -65,7 +65,6 @@ extern "C" {
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins
*/
@@ -116,14 +115,14 @@ static const uint8_t AREF = PIN_AREF;
#define PIN_SPI1_MISO (29) // (0 + 29)
#define PIN_SPI1_MOSI (30) // (0 + 30)
#define PIN_SPI1_SCK (3) // (0 + 3)
#define PIN_SPI1_SCK (3) // (0 + 3)
static const uint8_t SS = 42;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
/*
* eink display pins
*/
@@ -136,7 +135,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define PIN_EINK_MOSI (0 + 30) // also called SDI
// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
//#define PIN_EINK_PWR_ON (-1)
// #define USE_EINK
@@ -173,7 +172,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
SW1 <-> P0.01 (Arduino GPIO number 1)
A0 <-> P0.04/AIN2 (Arduino Analog A2
A1 <-> P0.31/AIN7 (Arduino Analog A7
SPI_CS <-> P0.26 (Arduino GPIO number 26)
SPI_CS <-> P0.26 (Arduino GPIO number 26)
*/
// RAK4630 LoRa module
@@ -203,7 +202,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define GPS_TX_PIN PIN_SERIAL1_TX
// RAK12002 RTC Module
#define RV3028_RTC (uint8_t) 0b1010010
#define RV3028_RTC (uint8_t)0b1010010
// RAK18001 Buzzer in Slot C
// #define PIN_BUZZER 21 // IO3 is PWM2
@@ -226,7 +225,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP //REAL_VBAT_MV_PER_LSB
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
#define HAS_RTC 1
variants/rak4631_epaper/variant.cpp
+11 -16
View File
@@ -19,28 +19,23 @@
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"
const uint32_t g_ADigitalPinMap[] =
{
// P0
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31,
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39,
40, 41, 42, 43, 44, 45, 46, 47};
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
// LED1 & LED2
pinMode(PIN_LED1, OUTPUT);
ledOff(PIN_LED1);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
pinMode(PIN_LED2, OUTPUT);
ledOff(PIN_LED2);
}
variants/rak4631_epaper/variant.h
+6 -7
View File
@@ -65,7 +65,6 @@ extern "C" {
#define PIN_BUTTON3 24
#define PIN_BUTTON4 25
/*
* Analog pins
*/
@@ -116,14 +115,14 @@ static const uint8_t AREF = PIN_AREF;
#define PIN_SPI1_MISO (29) // (0 + 29)
#define PIN_SPI1_MOSI (30) // (0 + 30)
#define PIN_SPI1_SCK (3) // (0 + 3)
#define PIN_SPI1_SCK (3) // (0 + 3)
static const uint8_t SS = 42;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
/*
* eink display pins
*/
@@ -136,7 +135,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define PIN_EINK_MOSI (0 + 30) // also called SDI
// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
//#define PIN_EINK_PWR_ON (-1)
#define USE_EINK
@@ -173,7 +172,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
SW1 <-> P0.01 (Arduino GPIO number 1)
A0 <-> P0.04/AIN2 (Arduino Analog A2
A1 <-> P0.31/AIN7 (Arduino Analog A7
SPI_CS <-> P0.26 (Arduino GPIO number 26)
SPI_CS <-> P0.26 (Arduino GPIO number 26)
*/
// RAK4630 LoRa module
@@ -203,7 +202,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define GPS_TX_PIN PIN_SERIAL1_TX
// RAK12002 RTC Module
#define RV3028_RTC (uint8_t) 0b1010010
#define RV3028_RTC (uint8_t)0b1010010
// Battery
// The battery sense is hooked to pin A0 (5)
@@ -222,7 +221,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP //REAL_VBAT_MV_PER_LSB
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
#define HAS_RTC 1
variants/station-g1/variant.h
+9 -6
View File
@@ -3,8 +3,9 @@
#define I2C_SDA 21
#define I2C_SCL 22
#define BUTTON_PIN 36 // The middle button GPIO on the Nano G1
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
#define BUTTON_PIN 36 // The middle button GPIO on the Nano G1
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented
// anywhere.
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
// common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
@@ -23,14 +24,16 @@
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
//#define SX126X_E22 // Not really an E22
//#define SX126X_E22 // Not really an E22
// Internally the module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#define SX126X_MAX_POWER 16 //Ensure the PA does not exceed the saturation output power. More Info:https://uniteng.com/wiki/doku.php?id=meshtastic:station#rf_design_-_lora_station_edition_g1
#define SX126X_MAX_POWER \
16 // Ensure the PA does not exceed the saturation output power. More
// Info:https://uniteng.com/wiki/doku.php?id=meshtastic:station#rf_design_-_lora_station_edition_g1
#endif
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BATTERY_SENSE_SAMPLES 30 //Set the number of samples, It has an effect of increasing sensitivity.
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BATTERY_SENSE_SAMPLES 30 // Set the number of samples, It has an effect of increasing sensitivity.
#define ADC_MULTIPLIER 6.45
#define BAT_FULLVOLT 12600
#define BAT_EMPTYVOLT 8200
variants/t-echo/variant.h
+9 -9
View File
@@ -44,8 +44,8 @@ extern "C" {
// LEDs
#define PIN_LED1 (0 + 14) // 13 red (confirmed on 1.0 board)
#define PIN_LED2 (0 + 15) // 14 blue
#define PIN_LED3 (0 + 13) // 15 green
#define PIN_LED2 (0 + 15) // 14 blue
#define PIN_LED3 (0 + 13) // 15 green
#define LED_RED PIN_LED3
#define LED_BLUE PIN_LED1
@@ -61,7 +61,7 @@ extern "C" {
* Buttons
*/
#define PIN_BUTTON1 (32 + 10)
#define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular GPIO
#define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular GPIO
#define PIN_BUTTON_TOUCH (0 + 11) // 0.11 is the soft touch button on T-Echo
/*
@@ -112,8 +112,8 @@ External serial flash WP25R1635FZUIL0
#define PIN_QSPI_CS (32 + 15)
#define PIN_QSPI_IO0 (32 + 12) // MOSI if using two bit interface
#define PIN_QSPI_IO1 (32 + 13) // MISO if using two bit interface
#define PIN_QSPI_IO2 (0 + 7) // WP if using two bit interface (i.e. not used)
#define PIN_QSPI_IO3 (0 + 5) // HOLD if using two bit interface (i.e. not used)
#define PIN_QSPI_IO2 (0 + 7) // WP if using two bit interface (i.e. not used)
#define PIN_QSPI_IO3 (0 + 5) // HOLD if using two bit interface (i.e. not used)
// On-board QSPI Flash
#define EXTERNAL_FLASH_DEVICES MX25R1635F
@@ -154,7 +154,7 @@ External serial flash WP25R1635FZUIL0
#define PIN_EINK_MOSI (0 + 29) // also called SDI
// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
#define PIN_EINK_PWR_ON (0 + 12)
#define USE_EINK
@@ -174,8 +174,8 @@ External serial flash WP25R1635FZUIL0
#define PIN_GPS_WAKE (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define PIN_GPS_TX (32 + 9) // This is for bits going TOWARDS the CPU
#define PIN_GPS_RX (32 + 8) // This is for bits going TOWARDS the GPS
#define PIN_GPS_TX (32 + 9) // This is for bits going TOWARDS the CPU
#define PIN_GPS_RX (32 + 8) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
@@ -217,7 +217,7 @@ External serial flash WP25R1635FZUIL0
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
#define HAS_RTC 1
variants/tbeam-s3-core/pins_arduino.h
+17 -19
View File
@@ -7,12 +7,12 @@
#define USB_PID 0x1001
#define EXTERNAL_NUM_INTERRUPTS 46
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
#define digitalPinHasPWM(p) (p < 46)
#define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
#define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1)
#define digitalPinHasPWM(p) (p < 46)
static const uint8_t TX = 43;
static const uint8_t RX = 44;
@@ -22,23 +22,21 @@ static const uint8_t SDA = 42;
static const uint8_t SCL = 41;
// Default SPI will be mapped to Radio
static const uint8_t SS = 10;
static const uint8_t MOSI = 11;
static const uint8_t MISO = 13;
static const uint8_t SCK = 12;
static const uint8_t SS = 10;
static const uint8_t MOSI = 11;
static const uint8_t MISO = 13;
static const uint8_t SCK = 12;
// Another SPI bus shares SD card and QMI8653 inertial measurement sensor
#define SPI_MOSI (35)
#define SPI_SCK (36)
#define SPI_MISO (37)
#define SPI_CS (47)
#define IMU_CS (34)
#define SPI_MOSI (35)
#define SPI_SCK (36)
#define SPI_MISO (37)
#define SPI_CS (47)
#define IMU_CS (34)
#define SDCARD_CS SPI_CS
#define IMU_INT (33)
#define SDCARD_CS SPI_CS
#define IMU_INT (33)
// #define PMU_IRQ (40)
#define RTC_INT (14)
#define RTC_INT (14)
#endif /* Pins_Arduino_h */
variants/tbeam-s3-core/variant.h
+28 -30
View File
@@ -1,36 +1,35 @@
// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
#define I2C_SDA1 42 //Used for PMU management and PCF8563
#define I2C_SCL1 41 //Used for PMU management and PCF8563
#define I2C_SDA1 42 // Used for PMU management and PCF8563
#define I2C_SCL1 41 // Used for PMU management and PCF8563
#define I2C_SDA 17 //For QMC6310 sensors and screens
#define I2C_SCL 18 //For QMC6310 sensors and screens
#define I2C_SDA 17 // For QMC6310 sensors and screens
#define I2C_SCL 18 // For QMC6310 sensors and screens
#define BUTTON_PIN 0 // The middle button GPIO on the T-Beam S3
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
#define BUTTON_PIN 0 // The middle button GPIO on the T-Beam S3
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented
// anywhere.
// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define LED_INVERTED 1
#define LED_INVERTED 1
// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
// not found then probe for SX1262
#define USE_SX1262
#define USE_SX1268
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 5
#define LORA_DIO1 1 // SX1262 IRQ
#define LORA_DIO2 4 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 5
#define LORA_DIO1 1 // SX1262 IRQ
#define LORA_DIO2 4 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#ifdef USE_SX1262
#define SX126X_CS 10 // FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_CS 10 // FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#endif
@@ -44,18 +43,17 @@
#define PMU_USE_WIRE1
#define RTC_USE_WIRE1
#define RF95_SCK 12
#define RF95_MISO 13
#define RF95_MOSI 11
#define RF95_NSS 10
#define RF95_SCK 12
#define RF95_MISO 13
#define RF95_MOSI 11
#define RF95_NSS 10
#define GPS_RX_PIN 9
#define GPS_TX_PIN 8
#define GPS_WAKEUP_PIN 7
#define GPS_1PPS_PIN 6
#define GPS_RX_PIN 9
#define GPS_TX_PIN 8
#define GPS_WAKEUP_PIN 7
#define GPS_1PPS_PIN 6
#define HAS_SDCARD //Have SPI interface SD card slot
#define HAS_SDCARD // Have SPI interface SD card slot
#define SDCARD_USE_SPI1
// PCF8563 RTC Module
@@ -63,7 +61,7 @@
#define HAS_RTC 1
//has 32768 Hz crystal
// has 32768 Hz crystal
#define HAS_32768HZ
#define USE_SH1106
variants/tbeam/variant.h
+3 -2
View File
@@ -3,8 +3,9 @@
#define I2C_SDA 21
#define I2C_SCL 22
#define BUTTON_PIN 38 // The middle button GPIO on the T-Beam
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
#define BUTTON_PIN 38 // The middle button GPIO on the T-Beam
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented
// anywhere.
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define LED_INVERTED 1
variants/tbeam_v07/variant.h
+1 -1
View File
@@ -4,7 +4,7 @@
#define I2C_SCL 22
#define BUTTON_PIN 39
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define USE_RF95
variants/tlora_t3s3_v1/pins_arduino.h
+14 -14
View File
@@ -7,28 +7,28 @@
#define USB_PID 0x1001
#define EXTERNAL_NUM_INTERRUPTS 46
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
#define digitalPinHasPWM(p) (p < 46)
#define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
#define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1)
#define digitalPinHasPWM(p) (p < 46)
// The default Wire will be mapped to PMU and RTC
static const uint8_t SDA = 18;
static const uint8_t SCL = 17;
// Default SPI will be mapped to Radio
static const uint8_t SS = 7;
static const uint8_t MOSI = 6;
static const uint8_t MISO = 3;
static const uint8_t SCK = 5;
static const uint8_t SS = 7;
static const uint8_t MOSI = 6;
static const uint8_t MISO = 3;
static const uint8_t SCK = 5;
#define SPI_MOSI (11)
#define SPI_SCK (14)
#define SPI_MISO (2)
#define SPI_CS (13)
#define SPI_MOSI (11)
#define SPI_SCK (14)
#define SPI_MISO (2)
#define SPI_CS (13)
#define SDCARD_CS SPI_CS
#define SDCARD_CS SPI_CS
#endif /* Pins_Arduino_h */
variants/tlora_t3s3_v1/variant.h
+2 -2
View File
@@ -13,8 +13,8 @@
#define I2C_SDA 18 // I2C pins for this board
#define I2C_SCL 17
#define LED_PIN 37 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses,
#define LED_PIN 37 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses,
#define BUTTON_NEED_PULLUP
variants/tlora_v1/variant.h
+2 -2
View File
@@ -7,8 +7,8 @@
#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 2 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define LED_PIN 2 // If defined we will blink this LED
#define BUTTON_PIN 0 // If defined, this will be used for user button presses
#define BUTTON_NEED_PULLUP
#define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
variants/tlora_v2_1_16/variant.h
+2 -3
View File
@@ -10,12 +10,11 @@
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN 12 // If defined, this will be used for user button presses,
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN 12 // If defined, this will be used for user button presses,
#define BUTTON_NEED_PULLUP
#define USE_RF95
#define LORA_DIO0 26 // a No connect on the SX1262 module
#define LORA_RESET 23
variants/tlora_v2_1_18/variant.h
+2 -2
View File
@@ -8,8 +8,8 @@
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN 12 // If defined, this will be used for user button presses,
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN 12 // If defined, this will be used for user button presses,
#define BUTTON_NEED_PULLUP
variants/wio-e5/variant.h
+7 -7
View File
@@ -12,18 +12,18 @@ Do not expect a working Meshtastic device with this target.
#ifndef _VARIANT_WIOE5_
#define _VARIANT_WIOE5_
//Arduino/PlatformIO support for SUBGHZSPI is not currently available
// Arduino/PlatformIO support for SUBGHZSPI is not currently available
//#define USE_SX1262
#ifdef USE_SX1262
#define HAS_RADIO 1
#define HAS_RADIO 1
/* module only transmits through RFO_HP */
#define SX126X_RXEN PA5
#define SX126X_TXEN PA4
/* module only transmits through RFO_HP */
#define SX126X_RXEN PA5
#define SX126X_TXEN PA4
/* TCXO fed by internal LDO option behind PB0 pin */
#define SX126X_E22
/* TCXO fed by internal LDO option behind PB0 pin */
#define SX126X_E22
#endif
#endif