kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 6 Packages Projects Releases Wiki Activity

trunk roundhouse kick

Browse Source
This commit is contained in:
Thomas Göttgens
2023-01-21 21:23:24 +01:00
parent 6cf18b7d07
commit 51b2c431d9
234 changed files with 4989 additions and 5101 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/diy/dr-dev/variant.h
+5 -6
View File
@@ -12,9 +12,9 @@
#define BUTTON_NEED_PULLUP
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LORA_DIO0 NOT_A_PIN // a No connect on the SX1262/SX1268 module
#define LORA_DIO0 NOT_A_PIN // a No connect on the SX1262/SX1268 module
#define LORA_RESET NOT_A_PIN // RST for SX1276, and for SX1262/SX1268
#define LORA_DIO3 NOT_A_PIN // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
#define LORA_DIO3 NOT_A_PIN // Not connected on PCB, but internally on the SX1262/SX1268, if DIO3 is high the TXCO is enabled
// In transmitting, set TXEN as high communication level，RXEN pin is low level;
// In receiving, set RXEN as high communication level, TXEN is lowlevel;
@@ -29,16 +29,15 @@
// PINS FOR THE 900M22S
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
#define LORA_DIO1 26 // IRQ for SX1262/SX1268
#define LORA_DIO2 22 // BUSY for SX1262/SX1268
#define LORA_TXEN NOT_A_PIN // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_RXEN 17 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#undef RF95_NSS
#define RF95_NSS 16
#define SX126X_BUSY 22
#define SX126X_CS 16
// PINS FOR THE 900M30S
/*
#define LORA_DIO1 27 // IRQ for SX1262/SX1268
variants/diy/v1/variant.h
+4 -4
View File
@@ -9,11 +9,11 @@
#define GPS_TX_PIN 15
#define GPS_UBLOX
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_MULTIPLIER 1.85 // (R1 = 470k, R2 = 680k)
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define EXT_NOTIFY_OUT 12 // Overridden default pin to use for Ext Notify Module (#975).
#define LED_PIN 2 // add status LED (compatible with core-pcb and DIY targets)
#define LORA_DIO0 26 // a No connect on the SX1262/SX1268 module
#define LORA_RESET 23 // RST for SX1276, and for SX1262/SX1268
variants/diy/v1_1/variant.h
+2 -2
View File
@@ -19,8 +19,8 @@
// In transmitting, set TXEN as high communication level，RXEN pin is low level;
// In receiving, set RXEN as high communication level, TXEN is lowlevel;
// Before powering off, set TXEN、RXEN as low level.
#define LORA_RXEN 14 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_TXEN 13 // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#define LORA_RXEN 14 // Input - RF switch RX control, connecting external MCU IO, valid in high level
#define LORA_TXEN 13 // Input - RF switch TX control, connecting external MCU IO or DIO2, valid in high level
#undef RF95_SCK
#define RF95_SCK 18