trunk roundhouse kick

variants/lora_isp4520/variant.cpp

@@ -25,7 +25,7 @@
 
 const uint32_t g_ADigitalPinMap[] = {
     25, // D0  SPI_MISO
-    24, // D1  SPI_NSS 
+    24, // D1  SPI_NSS
     23, // D2  SPI_SCK
     4,  // D3  VBAT
     11, // D4  DIO1
@@ -39,14 +39,14 @@ const uint32_t g_ADigitalPinMap[] = {
     10, // D12 LED1 GREEN
     17, // D13 LED2 RED
     9,  // D14 BUZZER
-    7,  // D15 BUTTON1   
+    7,  // D15 BUTTON1
 };
 
 #include <initializer_list>
 void initVariant()
 {
-  for (int i : {PIN_LED1, PIN_LED2}) {
-    pinMode(i, OUTPUT);
-    ledOff(i);
-  }
+    for (int i : {PIN_LED1, PIN_LED2}) {
+        pinMode(i, OUTPUT);
+        ledOff(i);
+    }
 }

variants/lora_isp4520/variant.h

@@ -33,7 +33,7 @@
 // Number of pins defined in PinDescription array
 #define PINS_COUNT (16)
 #define NUM_DIGITAL_PINS (16)
-#define NUM_ANALOG_INPUTS (1) 
+#define NUM_ANALOG_INPUTS (1)
 #define NUM_ANALOG_OUTPUTS (1)
 
 /*
@@ -41,7 +41,7 @@
  */
 #define SPI_INTERFACES_COUNT 1
 
-// These are in arduino pin numbers, 
+// These are in arduino pin numbers,
 // translation in g_ADigitalPinMap in variants.cpp
 #define PIN_SPI_MISO (0)
 #define PIN_SPI_MOSI (9)
@@ -54,9 +54,9 @@
 
 // GPIOs the SX1262 is connected
 #define USE_SX1262
-#define SX126X_CS 1    // aka SPI_NSS
+#define SX126X_CS 1 // aka SPI_NSS
 #define SX126X_DIO1 (4)
-#define SX126X_BUSY (5) 
+#define SX126X_BUSY (5)
 #define SX126X_RESET (6)
 
 /*
@@ -80,7 +80,7 @@
 /*
  * Buttons
  */
-#define PIN_BUTTON1 (15) 
+#define PIN_BUTTON1 (15)
 #define PIN_BUTTON2 (7)
 #define PIN_BUTTON3 (8)