kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 8 Packages Projects Releases Wiki Activity

trunk roundhouse kick

Browse Source
This commit is contained in:
Thomas Göttgens
2023-01-21 21:23:24 +01:00
parent 6cf18b7d07
commit 51b2c431d9
234 changed files with 4989 additions and 5101 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/t-echo/variant.h
+9 -9
View File
@@ -44,8 +44,8 @@ extern "C" {
// LEDs
#define PIN_LED1 (0 + 14) // 13 red (confirmed on 1.0 board)
#define PIN_LED2 (0 + 15) // 14 blue
#define PIN_LED3 (0 + 13) // 15 green
#define PIN_LED2 (0 + 15) // 14 blue
#define PIN_LED3 (0 + 13) // 15 green
#define LED_RED PIN_LED3
#define LED_BLUE PIN_LED1
@@ -61,7 +61,7 @@ extern "C" {
* Buttons
*/
#define PIN_BUTTON1 (32 + 10)
#define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular GPIO
#define PIN_BUTTON2 (0 + 18) // 0.18 is labeled on the board as RESET but we configure it in the bootloader as a regular GPIO
#define PIN_BUTTON_TOUCH (0 + 11) // 0.11 is the soft touch button on T-Echo
/*
@@ -112,8 +112,8 @@ External serial flash WP25R1635FZUIL0
#define PIN_QSPI_CS (32 + 15)
#define PIN_QSPI_IO0 (32 + 12) // MOSI if using two bit interface
#define PIN_QSPI_IO1 (32 + 13) // MISO if using two bit interface
#define PIN_QSPI_IO2 (0 + 7) // WP if using two bit interface (i.e. not used)
#define PIN_QSPI_IO3 (0 + 5) // HOLD if using two bit interface (i.e. not used)
#define PIN_QSPI_IO2 (0 + 7) // WP if using two bit interface (i.e. not used)
#define PIN_QSPI_IO3 (0 + 5) // HOLD if using two bit interface (i.e. not used)
// On-board QSPI Flash
#define EXTERNAL_FLASH_DEVICES MX25R1635F
@@ -154,7 +154,7 @@ External serial flash WP25R1635FZUIL0
#define PIN_EINK_MOSI (0 + 29) // also called SDI
// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
#define PIN_EINK_PWR_ON (0 + 12)
#define USE_EINK
@@ -174,8 +174,8 @@ External serial flash WP25R1635FZUIL0
#define PIN_GPS_WAKE (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define PIN_GPS_TX (32 + 9) // This is for bits going TOWARDS the CPU
#define PIN_GPS_RX (32 + 8) // This is for bits going TOWARDS the GPS
#define PIN_GPS_TX (32 + 9) // This is for bits going TOWARDS the CPU
#define PIN_GPS_RX (32 + 8) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
@@ -217,7 +217,7 @@ External serial flash WP25R1635FZUIL0
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
#define HAS_RTC 1