kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 5 Packages Projects Releases Wiki Activity

spelling fixes in .md files (#9810)

Browse Source 
9 fixes across 6 files
notably includes github/pull_request_template.md
This commit is contained in:
Larry Doolittle
2026-03-05 08:54:57 +11:00
committed by GitHub
co-authored by GitHub
parent 7ea28d34b2
commit 66161da2a7
6 changed files with 9 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md
+1 -1
View File
@@ -53,7 +53,7 @@ Making your own node based on this design is straightforward. There are various
The E80 from CDEbyte is the most obtainable module at present, and has been selected as the default option.
Naturally, CDEbyte have chosen to ignore the generic Semtech impelementation of the RF switching logic and have supplied confusing and contradictory documentation, which is explained below.
Naturally, CDEbyte have chosen to ignore the generic Semtech implementation of the RF switching logic and have supplied confusing and contradictory documentation, which is explained below.
tl;dr: The E80 is chosen as the default. **If you wish to use another module, the table in `rfswitch.h` must be adjusted accordingly.**
variants/nrf52840/diy/xiao_ble/README.md
+2 -2
View File
@@ -116,7 +116,7 @@ _(none)_
1. Double press the XIAO nrf52840's `reset` button to put it in bootloader mode, and a USB volume named `XIAO SENSE` will appear
2. Copy the `firmware.uf2` file to the `XIAO SENSE` volume (refer to the last step of [Build Meshtastic](#2-build-meshtastic))
3. The XIAO nrf52840's red LED will flash for several seconds as the firmware is copied
4. Once Meshtastic firmware succesfully boots, the:
4. Once Meshtastic firmware successfully boots, the:
1. Green LED will turn on
2. Red LED will flash several times to indicate flash memory writes during initial settings file creation
3. Green LED will blink every second once the firmware is running normally
@@ -135,7 +135,7 @@ _(none)_
- If you don't see any specific error message, but the boot process is stuck or not proceeding as expected, this might also mean there is a conflict in `variant.h`. If you have made any changes to the pin mapping, ensure they do not result in a conflict. If all else fails, try reverting your changes and using the known-good configuration included here.
- The above might also mean something is wired incorrectly. Try reverting to one of the known-good example wirings in section 4.
- If the E22 gets hot to the touch:
- The power amplifier is likely running continually. Disconnect it and the XIAO from power immediately, and double check wiring and pin mapping. In my experimentation this occurred in cases where TXEN was inadvertenly high (usually due to a pin mapping conflict).
- The power amplifier is likely running continually. Disconnect it and the XIAO from power immediately, and double check wiring and pin mapping. In my experimentation this occurred in cases where TXEN was inadvertently high (usually due to a pin mapping conflict).
## 5. Notes