Add Heltec tower v2 board. (#10693)

* Add heltec_mesh_tower_v2 board.

* Added automatic detection for high and low power versions.

* Fix low power consumption issues

src/mesh/LoRaFEMInterface.cpp

@@ -57,6 +57,11 @@ static void releaseSleepHolds()
 void LoRaFEMInterface::init(void)
 {
     setLnaCanControl(false); // Default is uncontrollable
+#if defined(RF_PA_DETECT_PIN)
+    pinMode(RF_PA_DETECT_PIN, INPUT);
+    high_power_pa = (digitalRead(RF_PA_DETECT_PIN) == RF_PA_HIGH_POWER_VALUE);
+    LOG_INFO("Detected %s LoRa PA profile", high_power_pa ? "high-power" : "low-power");
+#endif
 #ifdef HELTEC_V4
     pinMode(LORA_PA_POWER, OUTPUT);
     digitalWrite(LORA_PA_POWER, HIGH);
@@ -119,6 +124,13 @@ void LoRaFEMInterface::init(void)
     pinMode(LORA_KCT8103L_PA_CTX, OUTPUT);
     digitalWrite(LORA_KCT8103L_PA_CTX, LOW); // LNA enabled by default
     setLnaCanControl(true);
+#elif defined(USE_KCT8103L_PA_ONLY)
+    fem_type = KCT8103L_PA;
+    pinMode(LORA_KCT8103L_EN, OUTPUT);
+    digitalWrite(LORA_KCT8103L_EN, HIGH);
+    delay(1);
+    pinMode(LORA_KCT8103L_TX_RX, OUTPUT);
+    digitalWrite(LORA_KCT8103L_TX_RX, LOW);
 #endif
 }
 
@@ -148,6 +160,9 @@ void LoRaFEMInterface::setSleepModeEnable(void)
     // shutdown the PA
     digitalWrite(LORA_KCT8103L_PA_CSD, LOW);
     digitalWrite(LORA_PA_POWER, LOW);
+#elif defined(USE_KCT8103L_PA_ONLY)
+    // shutdown the PA
+    digitalWrite(LORA_KCT8103L_EN, LOW);
 #endif
 }
 
@@ -173,6 +188,9 @@ void LoRaFEMInterface::setTxModeEnable(void)
     enableFEMPower();
     digitalWrite(LORA_KCT8103L_PA_CSD, HIGH);
     digitalWrite(LORA_KCT8103L_PA_CTX, HIGH);
+#elif defined(USE_KCT8103L_PA_ONLY)
+    enableFEMPower();
+    digitalWrite(LORA_KCT8103L_TX_RX, HIGH);
 #endif
 }
 
@@ -206,6 +224,9 @@ void LoRaFEMInterface::setRxModeEnable(void)
     } else {
         digitalWrite(LORA_KCT8103L_PA_CTX, HIGH);
     }
+#elif defined(USE_KCT8103L_PA_ONLY)
+    enableFEMPower();
+    digitalWrite(LORA_KCT8103L_TX_RX, LOW);
 #endif
 }
 
@@ -247,6 +268,9 @@ void LoRaFEMInterface::setRxModeEnableWhenMCUSleep(void)
     rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CSD);
     rtc_gpio_hold_en((gpio_num_t)LORA_KCT8103L_PA_CTX);
 #endif
+#elif defined(USE_KCT8103L_PA_ONLY)
+    enableFEMPower();
+    digitalWrite(LORA_KCT8103L_TX_RX, LOW);
 #endif
 }
 
@@ -257,6 +281,11 @@ void LoRaFEMInterface::setLNAEnable(bool enabled)
 
 int8_t LoRaFEMInterface::powerConversion(int8_t loraOutputPower)
 {
+#if defined(RF_PA_DETECT_PIN)
+    if (!high_power_pa) {
+        return loraOutputPower;
+    }
+#endif
 #ifdef HELTEC_V4
     const uint16_t gc1109_tx_gain[] = {11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7};
     const uint16_t kct8103l_tx_gain[] = {13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 12, 12, 11, 11, 10, 9, 8, 7};

src/mesh/LoRaFEMInterface.h

@@ -24,7 +24,8 @@ class LoRaFEMInterface
     LoRaFEMType fem_type;
     bool lna_enabled = true;
     bool lna_can_control = false;
+    bool high_power_pa = true;
 };
 extern LoRaFEMInterface loraFEMInterface;
 
-#endif
+#endif