station-g2

2024-02-24 14:28:58 -08:00
parent 8bfe5a2bd4
commit 74714bf0c5
6 changed files with 145 additions and 5 deletions
@@ -0,0 +1,29 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS 48
+#define NUM_ANALOG_INPUTS 20
+
+#define analogInputToDigitalPin(p) (((p) < 20) ? (analogChannelToDigitalPin(p)) : -1)
+#define digitalPinToInterrupt(p) (((p) <= 48) ? (p) : -1)
+#define digitalPinHasPWM(p) (p < 46)
+
+// GPIO48 Reference: https://github.com/espressif/arduino-esp32/pull/8600
+
+// The default Wire will be mapped to Screen and Sensors
+static const uint8_t SDA = 5;
+static const uint8_t SCL = 6;
+
+// Default SPI will be mapped to Radio
+static const uint8_t MISO = 14;
+static const uint8_t SCK = 12;
+static const uint8_t MOSI = 13;
+static const uint8_t SS = 11;
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,15 @@
+[env:station-g2]
+extends = esp32s3_base
+board = station-g2
+board_build.mcu = esp32s3
+upload_protocol = esptool
+;upload_port = /dev/ttyACM0
+upload_speed = 921600
+lib_deps =
+  ${esp32s3_base.lib_deps}
+build_unflags = -DARDUINO_USB_MODE=1
+build_flags = 
+  ${esp32s3_base.build_flags} -D STATION_G2 -I variants/station-g2
+  -DBOARD_HAS_PSRAM 
+  -DSTATION_G2
+  -DARDUINO_USB_MODE=0
@@ -0,0 +1,52 @@
+/*
+Board Information: https://wiki.uniteng.com/en/meshtastic/station-g2
+*/
+
+// Station G2 may not have GPS installed, but it has a GROVE GPS Socket for Optional GPS Module
+#define GPS_RX_PIN 7
+#define GPS_TX_PIN 15
+
+// Station G2 has 1.3 inch OLED Screen
+#define USE_SH1107_128_64
+
+#define I2C_SDA 5 // I2C pins for this board
+#define I2C_SCL 6
+
+#define BUTTON_PIN 38 // This is the Program Button
+#define BUTTON_NEED_PULLUP
+
+#define USE_SX1262
+
+#define LORA_MISO 14
+#define LORA_SCK 12
+#define LORA_MOSI 13
+#define LORA_CS 11
+
+#define LORA_RESET 21
+#define LORA_DIO1 48
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+
+//  DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define SX126X_MAX_POWER                                                                                                         \
+    19 // Ensure the PA does not exceed the saturation output power. More
+       // Info:https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test
+#endif
+
+#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define ADC_MULTIPLIER 4
+#define BATTERY_SENSE_SAMPLES 15 // Set the number of samples, It has an effect of increasing sensitivity.
+#define BAT_FULLVOLT 8400
+#define BAT_EMPTYVOLT 5000
+#define BAT_CHARGINGVOLT 8400
+#define BAT_NOBATVOLT 4460
+#define CELL_TYPE_LION // same curve for liion/lipo
+#define NUM_CELLS 2