Add files via upload

2023-03-29 13:41:45 +02:00
parent 9a9279dd78
commit 790df42987
18 changed files with 1022 additions and 0 deletions
@@ -0,0 +1,36 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        48
+#define NUM_ANALOG_INPUTS       20
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(analogChannelToDigitalPin(p)):-1)
+#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 18;
+static const uint8_t SCL = 17;
+
+// Default SPI will be mapped to Radio
+static const uint8_t MISO  = 3;
+static const uint8_t SCK   = 5;
+static const uint8_t MOSI  = 6;
+static const uint8_t SS    = 7;
+
+
+
+//#define SPI_MOSI                    (11)
+//#define SPI_SCK                     (14)
+//#define SPI_MISO                    (2)
+//#define SPI_CS                      (13)
+
+//#define SDCARD_CS                   SPI_CS
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,22 @@
+[env:my-esp32s3-diy-oled]
+extends = esp32s3_base
+board = my-esp32s3-diy-oled
+board_build.arduino.memory_type = dio_opi
+board_build.mcu = esp32s3
+board_build.f_cpu = 240000000L
+upload_protocol = esptool
+upload_port = /dev/ttyACM0
+upload_speed = 921600
+platform_packages =
+  tool-esptoolpy@^1.40500.0
+lib_deps =
+  ${esp32_base.lib_deps}
+  caveman99/ESP32 Codec2@^1.0.1
+  adafruit/Adafruit NeoPixel@^1.10.7
+build_unflags = -DARDUINO_USB_MODE=1
+build_flags = 
+  ;${esp32_base.build_flags} -D MY_ESP32S3_DIY -I variants/my_esp32s3_diy_oled
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/my_esp32s3_diy_oled
+  -DBOARD_HAS_PSRAM
+  -mfix-esp32-psram-cache-issue
+  -DARDUINO_USB_MODE=0
@@ -0,0 +1,57 @@
+#define HAS_GPS 0
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+//#define HAS_SCREEN 0
+//#define HAS_SDCARD
+//#define SDCARD_USE_SPI1
+
+#define USE_SSD1306
+
+#define I2C_SDA 18 //1 // I2C pins for this board
+#define I2C_SCL 17 //2
+
+//#define LED_PIN 38     // This is a RGB LED not a standard LED
+
+#define BUTTON_PIN 0    // This is the BOOT button
+#define BUTTON_NEED_PULLUP
+
+
+//#define USE_RF95 // RFM95/SX127x
+//#define USE_SX1262
+#define USE_SX1280
+
+#define RF95_MISO  3
+#define RF95_SCK   5
+#define RF95_MOSI  6
+#define RF95_NSS   7
+
+#define LORA_RESET 8
+#define LORA_DIO1 16
+
+#ifdef USE_SX1262
+#define SX126X_CS RF95_NSS // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY 15
+#define SX126X_RESET LORA_RESET
+#define SX126X_RXEN 4
+#define SX126X_TXEN 9
+#endif
+
+#ifdef USE_SX1280
+#define SX128X_CS RF95_NSS
+#define SX128X_DIO1 LORA_DIO1
+#define SX128X_BUSY 15
+#define SX128X_RESET LORA_RESET
+#endif
+
+//#define USE_EINK
+  /*
+ * eink display pins
+ */
+//#define PIN_EINK_CS     13
+//#define PIN_EINK_BUSY   2
+//#define PIN_EINK_DC     1
+//#define PIN_EINK_RES    (-1)
+//#define PIN_EINK_SCLK   5 
+//#define PIN_EINK_MOSI   6